ISO 10110-19:2015
$19.50
Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: General description of surfaces and components
| Published By | Publication Date | Number of Pages |
| ISO | 2015-08 | 18 |
ISO 10110-19:2015 specifies the presentation of design and functional requirements for optical elements and systems in technical drawings used for manufacture and inspection.
ISO 10110-19:2015 provides a general method of describing surfaces and components. This part of ISO 10110 applies to continuous and discontinuous surfaces. It does not apply to diffractive surfaces, Fresnel surfaces, ophthalmic glasses, and micro-optical surfaces.
ISO 10110-19:2015 applies to any general surface or component, even including spherical or rotationally symmetric surfaces if it is necessary, i.e. when NURBS, splines, point clouds, etc. are used.
ISO 10110-19:2015 does not specify the method by which compliance with the specifications is to be tested.
Related products
-
BS EN 1010-4:2004+A1:2009:2010 Edition
Safety of machinery. Safety requirements for the design and construction of printing and paper converting…
-
ISO 10110-6:2015
Optics and photonics — Preparation of drawings for optical elements and systems — Part 6:…
-
BS ISO 10110-19:2015
Optics and photonics. Preparation of drawings for optical elements and systems – General description of…
-
BS ISO 10110-5:2007
Optics and photonics. Preparation of drawings for optical elements and systems – Surface form tolerances…
-
BS ISO 10110-1:2006
Optics and photonics. Preparation of drawings for optical elements and systems – General Published By…
-
BS EN 1010-2:2006+A1:2010
Safety of machinery. Safety requirements for the design and construction of printing and paper converting…
-
BS ISO 10110-4:1997
Optics and optical instruments. Preparation of drawings for optical elements and systems – Material imperfections.…
-
BS ISO 10110-8:2010
Optics and photonics. Preparation of drawings for optical elements and systems – Surface texture; roughness…
-
BS ISO 10110-6:1996:2000 Edition
Optics and optical instruments. Preparation of drawings for optical elements and systems – Centring tolerances…
-
BS ISO 12110-2:2013
Metallic materials. Fatigue testing. Variable amplitude fatigue testing – Cycle counting and related data reduction…
-
BS ISO 14999-4:2015
Optics and photonics. Interferometric measurement of optical elements and optical systems – Interpretation and evaluation…
-
IEEE 15289-2019
ISO/IEC/IEEE International Standard — Systems and software engineering – Content of life-cycle information items (documentation)…
-
IEEE 11073 10102 2013
Health informatics Point-of-care medical device communication Part 10102: Nomenclature Annotated ECG Published By Publication Date…
-
BS ISO 10110-9:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems – Surface treatment…
-
BSI 19/30390442 DC:2019 Edition
BS EN 10210-3. Hot finished steel structural hollow sections – Part 3. Technical delivery conditions…
-
BS ISO 14999-4:2007
Optics and photonics. Interferometric measurement of optical elements and optical systems – Interpretation and evaluation…
-
BS EN 1127-1:2019
Explosive atmospheres. Explosion prevention and protection – Basic concepts and methodology Published By Publication Date…
-
BS ISO 10110-7:2017
Optics and photonics. Preparation of drawings for optical elements and systems – Surface imperfections Published…
-
BS ISO 10110-8:1997:1998 Edition
Optics and optical instruments. Preparation of drawings for optical elements and systems – Surface texture…
-
IEEE 15289-2015
ISO/IEC/IEEE International Standard Systems and software engineering — Content of life-cycle information items (documentation) Published…
-
BS ISO 10110-10:2004
Optics and photonics. Preparation of drawings for optical elements and systems – Table representing data…
-
BS ISO 10110-9:2016
Optics and photonics. Preparation of drawings for optical elements and systems – Surface treatment and…
-
IEEE 15289-2017
ISO/IEC/IEEE International Standard – Systems and software engineering — Content of life-cycle information items (documentation)…
-
BS EN ISO 11073-10102:2014
Health informatics. Point-of-care medical device communication – Nomenclature. Annotated ECG Published By Publication Date Number…
-
BS ISO 10110-3:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems – Material imperfections.…
-
BS ISO 16110-2:2010
Hydrogen generators using fuel processing technologies – Test methods for performance Published By Publication Date…
-
BS ISO 10110-7:2008
Optics and photonics. Preparation of drawings for optical elements and systems – Surface imperfection tolerances…
-
BS ISO 10110-2:1996
Optics and optical instruments. Preparation of drawings for optical elements and systems – Material imperfections.…
-
BS ISO 10110-1:2019
Optics and photonics. Preparation of drawings for optical elements and systems – General Published By…
-
BS EN ISO 1110:2019
Plastics. Polyamides. Accelerated conditioning of test specimens Published By Publication Date Number of Pages BSI…
-
BS ISO 10110-6:2015
Optics and photonics. Preparation of drawings for optical elements and systems – Centring tolerances Published…
-
IEEE 15289-2015
ISO/IEC/IEEE International Standard Systems and software engineering — Content of life-cycle information items (documentation) Published…
-
BS EN 1127-1:2019
Explosive atmospheres. Explosion prevention and protection – Basic concepts and methodology Published By Publication Date…
-
BS ISO 12110-1:2013
Metallic materials. Fatigue testing. Variable amplitude fatigue testing – General principles, test method and reporting…
-
BS ISO 10110-8:2019
Optics and photonics. Preparation of drawings for optical elements and systems – Surface texture Published…
-
BS ISO 10110-5:2015
Optics and photonics. Preparation of drawings for optical elements and systems – Surface form tolerances…
-
IEEE ISO IEC 15289 2017
ISO/IEC/IEEE International Standard – Systems and software engineering — Content of life-cycle information items (documentation)…
-
IEEE 11073-10102-2012
Health informatics — Point-of-care medical device communication Part 10102: Nomenclature —Annotated ECG Published By Publication…
-
BS EN 10025-3:2004
Hot rolled products of structural steels – Technical delivery conditions for normalized/normalized rolled weldable fine…
-
BS ISO/IEC/IEEE 15289:2019
Systems and software engineering. Content of life-cycle information items (documentation) Published By Publication Date Number…
