ISO 11143:2008
$36.40
Art dentaire — Séparateurs d’amalgame
| Published By | Publication Date | Number of Pages |
| ISO | 2008-07 | 32 |
L'ISO 11143:2008 spécifie les exigences et les méthodes d'essai relatives aux séparateurs d'amalgame utilisés en association avec le matériel dentaire du centre de traitement dentaire. Elle spécifie le rendement des séparateurs en termes de niveau de rétention d'amalgame, basé sur un essai en laboratoire, ainsi que le mode opératoire d'essai permettant de calculer ce rendement. Elle comporte également des exigences relatives à la sécurité de fonctionnement du séparateur d'amalgame, au marquage et aux instructions d'utilisation, de fonctionnement et de maintenance.
Tous les essais décrits dans l'ISO 11143:2008 sont des essais de type.
Related products
-
ISO 11140-1:2005
Sterilization of health care products — Chemical indicators — Part 1: General requirements Published By…
-
BS EN ISO 11140-1:2009
Sterilization of health care products. Chemical indicators – General requirements Published By Publication Date Number…
-
ISO 11142:2005
Micrographics — Colour microfilm — Application of the exposure technique to prepare line originals and…
-
BS ISO 11443:2005
Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers Published By Publication…
-
ISO/TS 11133-1:2009
Microbiology of food and animal feeding stuffs — Guidelines on preparation and production of culture…
-
ISO 11140-5:2007
Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for…
-
ISO/TS 10303-1113:2006
Industrial automation systems and integration — Product data representation and exchange — Part 1113: Application…
-
BS EN ISO 11143:2000:2007 Edition
Dental equipment. Amalgam separators Published By Publication Date Number of Pages BSI 2007 36
-
ISO/TS 10303-1114:2004
Industrial automation systems and integration — Product data representation and exchange — Part 1114: Application…
-
BS ISO 11843-4:2003
Capability of detection – Methodology for comparing the minimum detectable value with a given value…
-
ISO 11193-2:2006
Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride) Published…
-
ISO 11193-1:2008
Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or…
-
BS ISO 11843-3:2003
Capability of detection – Methodology for determination of the critical value for the response variable…
-
ISO 11146-1:2005
Lasers and laser-related equipment — Test methods for laser beam widths, divergence angles and beam…
-
ISO/TS 10303-1143:2005
Industrial automation systems and integration — Product data representation and exchange — Part 1143: Application…
-
ISO/TS 11133-2:2003
Microbiology of food and animal feeding stuffs — Guidelines on preparation and production of culture…
-
BS ISO 11843-7:2018 – TC:2020 Edition
Tracked Changes. Capability of detection – Methodology based on stochastic properties of instrumental noise Published…
-
BS EN ISO 11643:2009
Leather. Tests for colour fastness. Colour fastness of small samples to solvents Published By Publication…
-
ISO 11145:2006
Optique et photonique — Lasers et équipements associés aux lasers — Vocabulaire et symboles Published…
-
BS ISO 11413:2008:2009 Edition
Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and…
-
BS EN ISO 11343:2005:2006 Edition
Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge…
-
BS ISO 11843-2:2000:2008 Edition
Capability of detection – Methodology in the linear calibration case Published By Publication Date Number…
-
ISO 11140-3:2007
Stérilisation des produits de santé — Indicateurs chimiques — Partie 3: Systèmes d’indicateurs de Classe…
-
ISO 16143-3:2005
Stainless steels for general purposes — Part 3: Wire Published By Publication Date Number of…
-
BS EN ISO 11146:2000
Laser and laser-related equipment. Test methods for laser beam parameters. Beam width, divergence angle and…
-
AS ISO 11134:2003
Sterilization of health care products – Requirements for validation and routine control – Industrial moist…
-
BS EN ISO 11145:2018
Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols Published By Publication Date Number…
-
BS EN ISO 11145:2006
Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols Published By Publication Date Number…
-
BS EN ISO 11143:2008
Dental equipment. Amalgam separators Published By Publication Date Number of Pages BSI 2008 34
-
BS EN ISO 11145:2008
Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols Published By Publication Date Number…
-
BS ISO 11843-7:2018
Capability of detection – Methodology based on stochastic properties of instrumental noise Published By Publication…
-
ISO 11140-4:2007
Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as…
-
ISO 11146-2:2005
Lasers and laser-related equipment — Test methods for laser beam widths, divergence angles and beam…
-
ISO/TR 11146-3:2004
Lasers and laser-related equipment — Test methods for laser beam widths, divergence angles and beam…
-
ISO 11145:2018
Optics and photonics — Lasers and laser-related equipment — Vocabulary and symbols Published By Publication…
-
ISO 16143-2:2004
Stainless steels for general purposes — Part 2: Semi-finished products, bars, rods and sections Published…
-
ISO 11343:2003
Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions…
-
UNE-EN ISO 11145:2018:2019 Edition
Optics and photonics – Lasers and laser-related equipment – Vocabulary and symbols Published By Publication…
-
ISO 11413:2008
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe…
-
BS EN ISO 11145:2001
Optics and optical instruments. Lasers and laser-related equipment. Vocabulary and symbols Published By Publication Date…
