ISO 11237:2010
$19.50
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
| Published By | Publication Date | Number of Pages |
| ISO | 2010-04 | 18 |
ISO 11237:2010 specifies requirements for five types of compact, wire-braid-reinforced hose and hose assembly of nominal size from 5 to 31,5. They are suitable for use with water-based hydraulic fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from -40 °C to +60 °C and oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from -40 °C to +100 °C.
This International Standard does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies.
Related products
-
ISO 11237:2017
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids…
-
ISO/TS 21237:2020
Nanotechnologies — Air filter media containing polymeric nanofibres — Specification of characteristics and measurement methods…
-
BS ISO 11437:2018
Nickel alloys. Determination of lead. Electrothermal atomic absorption spectrometric method Published By Publication Date Number…
-
ISO 11297-4:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part…
-
ISO 11267:2014
Soil quality — Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants Published By…
-
BS ISO 19237:2017
Intelligent transport systems. Pedestrian detection and collision mitigation systems (PDCMS). Performance requirements and test procedures…
-
BS ISO 11837:2011
Machinery for forestry. Saw chain shot guarding systems. Test method and performance criteria Published By…
-
BS ISO 14237:2000
Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly…
-
ISO 11437:2018
Nickel alloys — Determination of lead — Electrothermal atomic absorption spectrometric method Published By Publication…
-
ISO 18237:2017
Hydraulic fluid power — Method for evaluating water separation performance of dehydrators Published By Publication…
-
ISO 11239:2012
Health informatics — Identification of medicinal products — Data elements and structures for the unique…
-
ISO/TS 11937:2012
Nanotechnologies — Nanoscale titanium dioxide in powder form — Characteristics and measurement Published By Publication…
-
ISO 11337:2010
Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography Published By Publication…
-
BS ISO 11257:2015
Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of…
-
ISO 11287:2011
Green tea — Definition and basic requirements Published By Publication Date Number of Pages ISO…
-
BS ISO 15237:2016
Solid mineral fuels. Determination of total mercury content of coal Published By Publication Date Number…
-
BS ISO 14237:2010
Surface chemical analysis. Secondary-ion mass spectrometry. Determination of boron atomic concentration in silicon using uniformly…
-
ISO 11297-2:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part…
-
ISO 11236:2017
Ingrédients de mélange du caoutchouc — Anti dégradants du type p-phénylènediamine (PPDs) — Méthodes d’essai…
-
ISO 11238:2018
Informatique de santé — Identification des produits médicaux — Éléments de données et structures pour…
-
ISO 15237:2016
Solid mineral fuels — Determination of total mercury content of coal Published By Publication Date…
-
ISO 11037:2011
Analyse sensorielle — Lignes directrices pour l’évaluation sensorielle de la couleur des produits Published By…
-
ISO 11231:2019
Space systems — Probabilistic risk assessment (PRA) Published By Publication Date Number of Pages ISO…
-
ISO 11137-2:2013
Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose Published…
-
ISO 11277:2020
Qualité du sol — Détermination de la répartition granulométrique de la matière minérale des sols…
-
BS ISO 16237:2015
Mechanical joining. Destructive testing of joints. Specimen dimensions and test procedure for cross-tension testing of…
-
ISO 11227:2012
Space systems — Test procedure to evaluate spacecraft material ejecta upon hypervelocity impact Published By…
-
ISO 16237:2015
Mechanical joining — Destructive testing of joints — Specimen dimensions and test procedure for cross-tension…
-
ISO 11231:2010
Space systems — Probabilistic risk assessment (PRA) Published By Publication Date Number of Pages ISO…
-
ISO 11137-3:2017
Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of…
-
ISO 11238:2012
Health informatics — Identification of medicinal products — Data elements and structures for the unique…
-
ISO 19237:2017
Intelligent transport systems — Pedestrian detection and collision mitigation systems (PDCMS) — Performance requirements and…
-
ISO 11297-3:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part…
-
BS EN ISO 11337:2010:2011 Edition
Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography Published By Publication Date Number…
-
ISO 14237:2010
Surface chemical analysis — Secondary-ion mass spectrometry — Determination of boron atomic concentration in silicon…
-
BS ISO 11287:2011
Green tea. Definition and basic requirements Published By Publication Date Number of Pages BSI 2011…
-
ISO/TR 11233:2014
Space systems — Orbit determination and estimation — Process for describing techniques Published By Publication…
-
ISO 11297-1:2018
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part…
-
ISO 11297-1:2013
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part…
-
ISO 11235:2016
Rubber compounding ingredients — Sulfenamide accelerators — Test methods Published By Publication Date Number of…
