ISO 11337:2010
$27.95
Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography
Published By | Publication Date | Number of Pages |
ISO | 2010-12 | 20 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
ISO 11337:2010 specifies a method for determining epsilon-caprolactam and omega-laurolactam in polyamides by gas chromatography. It is suitable particularly for the determination of epsilon-caprolactam in polyamide 6 and omega-laurolactam in polyamide 12. Bearing in mind that gas chromatography offers a wide range of possible conditions, the method specified is that shown to have been suitable in practice.
Two variants of the basic method are specified:
- Method A is an extraction method with boiling methanol, and the extract is injected into a gas chromatograph.
- Method B is a method using a solvent, and the solution is injected into a gas chromatograph.
Published Code | ISO |
---|---|
Published By | International Organization for Standardization |
Publication Date | 2010-12 |
Pages Count | 20 |
Language | France |
Edition | 2 |
File Size | 368.6 KB |
ICS Codes | 83.080.20 - Thermoplastic materials |
Related products
-
ISO 11137-3:2017
Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of…
-
ISO 11237:2017
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids…
-
ISO 11357-7:2015
Plastiques — Analyse calorimétrique différentielle (DSC) — Partie 7: Détermination de la cinétique de cristallisation…
-
BS EN ISO 11357-4:2013
Plastics. Differential scanning calorimetry (DSC) – Determination of specific heat capacity Published By Publication Date…
-
ISO 1133-2:2011
Plastiques — Détermination de l’indice de fluidité à chaud des thermoplastiques, en masse (MFR) et…
-
BS EN ISO 11337:2010:2011 Edition
Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography Published By Publication Date Number…
-
BS EN ISO 13137:2013
Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and…
-
BS EN ISO 11737-2:2020
Sterilization of health care products. Microbiological methods – Tests of sterility performed in the definition,…
-
BS EN ISO 11357-1:2016
Plastics. Differential scanning calorimetry (DSC) – General principles Published By Publication Date Number of Pages…
-
ISO 11336-2:2020
Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 2: Glazed opening…
-
ISO 11336-3:2019
Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 3: Quality assurance,…
-
ISO/TS 19337:2016
Nanotechnologies — Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent…
-
BS ISO 11437:2018
Nickel alloys. Determination of lead. Electrothermal atomic absorption spectrometric method Published By Publication Date Number…
-
BS EN ISO 11357-5:2014
Plastics. Differential scanning calorimetry (DSC) – Determination of characteristic reaction-curve temperatures and times, enthalpy of…
-
ISO/TS 11937:2012
Nanotechnologies — Nanoscale titanium dioxide in powder form — Characteristics and measurement Published By Publication…
-
ISO 11357-2:2013
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and…
-
ISO 11237:2010
Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids…
-
BS EN ISO 1133:2000
Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of…
-
ISO 11357-2:2020
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and…
-
BS ISO 18337:2015
Surface chemical analysis. Surface characterization. Measurement of the lateral resolution of a confocal fluorescence microscope…
-
ISO 11357-5:2013
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and…
-
BS EN ISO 11357-6:2018
Plastics. Differential scanning calorimetry (DSC) – Determination of oxidation induction time (isothermal OIT) and oxidation…
-
BS EN ISO 11357-7:2015
Plastics. Differential scanning calorimetry (DSC) – Part 7: Determination of crystallization kinetics Published By Publication…
-
ISO 11357-3:2018
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of…
-
BS EN ISO 11339:2010
Adhesives. T-peel test for flexible-to-flexible bonded assemblies Published By Publication Date Number of Pages BSI…
-
ISO 11357-1:2016
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles Published By Publication Date…
-
ISO 1133-1:2011
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of…
-
BS ISO 11837:2011
Machinery for forestry. Saw chain shot guarding systems. Test method and performance criteria Published By…
-
ISO 11357-6:2018
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal…
-
ISO 18337:2015
Surface chemical analysis — Surface characterization — Measurement of the lateral resolution of a confocal…
-
ISO/TS 11137-4:2020
Sterilization of health care products — Radiation — Part 4: Guidance on process control Published…
-
BS EN ISO 11357-7:2013
Plastics. Differential scanning calorimetry – Determination of crystallization kinetics Published By Publication Date Number of…
-
ISO 11336-1:2012
Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 1: Design criteria,…
-
ISO 11037:2011
Analyse sensorielle — Lignes directrices pour l’évaluation sensorielle de la couleur des produits Published By…
-
ISO 11347:2012
Navires et technologie maritime — Grands yachts — Mesurage et évaluation de l’apparence visuelle des…
-
ISO 11437:2018
Nickel alloys — Determination of lead — Electrothermal atomic absorption spectrometric method Published By Publication…
-
ISO 11339:2010
Adhesives — T-peel test for flexible-to-flexible bonded assemblies Published By Publication Date Number of Pages…
-
ISO 11137-2:2013
Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose Published…
-
ISO 13137:2013
Workplace atmospheres — Pumps for personal sampling of chemical and biological agents — Requirements and…
-
ISO 11357-3:2011
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of…