ISO 11343:2003
$19.50
Adhesives — Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions — Wedge impact method
| Published By | Publication Date | Number of Pages |
| ISO | 2003-04 | 12 |
ISO 11343:2003 specifies a dynamic impact wedge method for the determination of the cleavage resistance under impact loading of high-strength adhesive bonds between two metallic adherends, when tested under specified conditions of preparation and testing. This test procedure does not provide design information.
The method allows a choice of sheet metal substrate corresponding to those materials frequently used in industry, e.g. for automotive applications.
Related products
-
BS EN ISO 11143:2000:2007 Edition
Dental equipment. Amalgam separators Published By Publication Date Number of Pages BSI 2007 36
-
ISO 11393-5:2001
Protective clothing for users of hand-held chain-saws — Part 5: Test methods and performance requirements…
-
ISO 11303:2002
Corrosion des métaux et alliages — Lignes directrices pour le choix des méthodes de protection…
-
ISO 11348-3:2007
Qualité de l’eau — Détermination de l’effet inhibiteur d’échantillons d’eau sur la luminescence de Vibrio…
-
BS EN ISO 14343:2009
Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and…
-
ISO 11143:2008
Art dentaire — Séparateurs d’amalgame Published By Publication Date Number of Pages ISO 2008-07 32
-
ISO 16343:2013
Energy performance of buildings — Methods for expressing energy performance and for energy certification of…
-
BS ISO 11323:2002
Iron ore and direct reduced iron. Vocabulary Published By Publication Date Number of Pages BSI…
-
ISO 10343:2009
Ophthalmic instruments — Ophthalmometers Published By Publication Date Number of Pages ISO 2009-07 12
-
BS ISO 11345:2006
Rubber. Assessment of carbon black and carbon black/silica dispersion. Rapid comparative methods Published By Publication…
-
BS ISO 11393-5:2001:2002 Edition
Protective clothing for users of hand-held chain-saws – Test methods and performance requirements for protective…
-
BS EN ISO 11341:2004
Paints and varnishes. Artificial weathering and exposure to artificial radiation. Exposure to filtered xenon-arc radiation…
-
ISO 11344:2004
Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation…
-
AS/NZS ISO 14343:2006 (R2017)
Welding consumables – Wire electrodes, wires and rods for arc welding of stainless and heat-resisting…
-
ISO 11393-4:2003
Protective clothing for users of hand-held chain-saws — Part 4: Test methods and performance requirements…
-
ISO 11341:2004
Paints and varnishes — Artificial weathering and exposure to artificial radiation — Exposure to filtered…
-
ISO 11334-1:2007
Assistive products for walking manipulated by one arm — Requirements and test methods — Part…
-
ISO/TS 10303-1143:2005
Industrial automation systems and integration — Product data representation and exchange — Part 1143: Application…
-
BS ISO 11843-6:2013:2015 Edition
Capability of detection – Methodology for the determination of the critical value and the minimum…
-
BS EN ISO 11643:2009
Leather. Tests for colour fastness. Colour fastness of small samples to solvents Published By Publication…
-
ISO 11348-1:2007
Water quality — Determination of the inhibitory effect of water samples on the light emission…
-
BS EN ISO 11343:2005:2006 Edition
Adhesives. Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions. Wedge…
-
BS ISO 16343:2013
Energy performance of buildings. Methods for expressing energy performance and for energy certification of buildings…
-
ISO 11348-2:2007
Water quality — Determination of the inhibitory effect of water samples on the light emission…
-
BS EN ISO 11303:2008
Corrosion of metals and alloys. Guidelines for selection of protection methods against atmospheric corrosion Published…
-
ISO 11393-6:2007
Protective clothing for users of hand-held chain-saws — Part 6: Test methods and performance requirements…
-
BS EN ISO 10343:2009
Ophthalmic instruments. Ophthalmometers Published By Publication Date Number of Pages BSI 2009 14
-
ISO 11345:2006
Rubber — Assessment of carbon black and carbon black/silica dispersion — Rapid comparative methods Published…
-
BS ISO 11344:2004:2008 Edition
Rubber, raw synthetic. Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography…
-
ISO/TS 10303-1133:2004
Industrial automation systems and integration — Product data representation and exchange — Part 1133: Application…
-
BS ISO 11843-3:2003
Capability of detection – Methodology for determination of the critical value for the response variable…
-
BS ISO 11843-2:2000:2008 Edition
Capability of detection – Methodology in the linear calibration case Published By Publication Date Number…
-
ISO 1133:2005
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR)…
-
BS EN ISO 11143:2008
Dental equipment. Amalgam separators Published By Publication Date Number of Pages BSI 2008 34
-
ISO 11346:2004
Rubber, vulcanized or thermoplastic — Estimation of life-time and maximum temperature of use Published By…
-
BS ISO 11843-4:2003
Capability of detection – Methodology for comparing the minimum detectable value with a given value…
-
BS EN ISO 14343:2007
Welding consumables. Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and…
-
BS ISO 11443:2005
Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers Published By Publication…
-
ISO/TS 10303-1343:2005
Industrial automation systems and integration — Product data representation and exchange — Part 1343: Application…
-
ISO 14343:2009
Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless…
