ISO 13653:1996
$27.95
Optics and optical instruments — General optical test methods — Measurement of relative irradiance in the image field
| Published By | Publication Date | Number of Pages |
| ISO | 1996-12 | 21 |
Applies to optical imaging systems in the optical spectral region from 100 nm to 1 m. Telescopic systems are also included. The standard refers to the relative irradiance in the image field, but it is also applicable to determination of the relative radiant power.
Related products
-
BS ISO/IEC 13650-2:1997
Information technology. Open systems interconnection. Conformance test suite for the OSI TP protocol – Test…
-
ISO 10297:2006
Transportable gas cylinders — Cylinder valves — Specification and type testing Published By Publication Date…
-
AS/NZS 3823.1.2:2001
Performance of electrical appliances – Airconditioners and heat pumps – Test methods – Ducted airconditioners…
-
BS ISO 13655:1996:1997 Edition
Graphic technology. Spectral measurement and colorimetric computation for graphic arts images Published By Publication Date…
-
BS EN ISO 15653:2010
Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds Published…
-
BS ISO 13653:2019
Optics and photonics. General optical test methods. Measurement of relative irradiance in the image field…
-
BS EN 13027:2001
Packaging. Light-gauge metal packaging. Open-top round cans defined by their nominal gross-lidded capacity Published By…
-
AGMA 2116-A05:2005 Edition
Evaluation of Double Flank Testers for Radial Composite Measurement of Gears Published By Publication Date…
-
AGMA 935-A05:2005 Edition
Recommendations Relative to the Evaluation of Radial Composite Gear Double Flank Testers Published By Publication…
-
BS 903-A12:1995
Physical testing of rubber – Method for determination of the adhesion strength to textile fabric…
-
BS 6992-2:1991
Capacities and related cross sections of open-top cans for food and drinks – Recommendations for…
-
ISO 10653:1993
Light-gauge metal containers — Round open-top cans — Cans defined by their nominal gross lidded…
-
ISO 13753:1998
Mechanical vibration and shock — Hand-arm vibration — Method for measuring the vibration transmissibility of…
-
ISO 13853:1998
Safety of machinery — Safety distances to prevent danger zones being reached by the lower…
-
BS 709:1983
Methods of destructive testing fusion welded joints and weld metal in steel Published By Publication…
-
DIN EN 13381-4:2013 Edition
Prüfverfahren zur Bestimmung des Beitrages zum Feuerwiderstand von tragenden Bauteilen – Teil 4: Passive Brandschutzmaßnahmen…
-
ISO 13651:1996
Plastics — Epoxy resins and related materials — Determination of total saponifiable chlorine Published By…
-
BS ISO 10653:1993:1996 Edition
Light-gauge metal containers. Round open-top cans. Cans defined by their nominal gross lidded capacities Published…
-
AGMA ISO 18653-A06:2006 Edition
Gears – Evaluation of Instruments for the Measurement of Individual Gears Published By Publication Date…
-
ISO 13553:1994
Textile machinery and accessories — Weaver’s beams — Specification for connections for automation of beam…
-
BS EN ISO 13753:2008
Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials…
-
JIS Z 1571:2016
Specifications for hermetically sealed metal cans for food and drink Published By Publication Date Number…
-
ISO 13683:1997
Sterilization of health care products — Requirements for validation and routine control of moist heat…
-
BS EN ISO 13753:1999
Mechanical vibration and shock. Hand-arm vibration. Method for measuring the vibration transmissibility of resilient materials…
-
BS 7011-2.2:1998:2003 Edition
Consumable accessories for light microscopes. Slides – Specification for materials and quality of finish Published…
-
ISO/TR 13353:1994
Diesel fuel and petrol filters for internal combustion engines — Initial efficiency by particule counting…
-
BS ISO 13655:2009:2010 Edition
Graphic technology. Spectral measurement and colorimetric computation for graphic arts images Published By Publication Date…
-
BS ISO 13653:2019
Optics and photonics. General optical test methods. Measurement of relative irradiance in the image field…
-
BS EN ISO 2360:1995
Non-conductive coatings on non-magnetic basis metals. Measurement of coating thickness. Eddy current method Published By…
-
ISO 13563-2:2001
Chariots élévateurs à fourche à chargement latéral sur un côté — Partie 2: Essais de…
-
BS 6992-3:1988
Capacities and related cross sections of open-top cans for food and drinks – Recommendations for…
-
BS ISO 13653:1996:1997 Edition
Optics and optical instruments. General optical test methods. Measurement of relative irradiance in the image…
-
BS EN 1363-1:1999
Fire resistance tests – General requirements Published By Publication Date Number of Pages BSI 1999…
-
ISO/IEC 13650-2:1997
Information technology — Open Systems Interconnection — Conformance test suite for the OSI TP protocol…
-
BS 1192-1:1984
Construction drawing practice – Recommendations for general principles Published By Publication Date Number of Pages…
-
AGMA ISO 10064-5-A06:2006 Edition
Code of Inspection Practice – Part 5: Recommendations Relative to Evaluation of Gear Measuring Instruments…
-
BS ISO 13651:1996:1997 Edition
Plastics. Epoxy resins and related materials. Determination of total saponifiable chlorine Published By Publication Date…
-
ISO/IEC 13650-1:1999
Information technology — Open Systems Interconnection — Conformance test suite for the OSI TP protocol…
-
ISO 13663:1995
Welded steel tubes for pressure purposes — Ultrasonic testing of the area adjacent to the…
-
BS EN ISO 1463:1995
Metallic and oxide coatings. Measurement of coating thickness. Microscopical method Published By Publication Date Number…
