ISO 14113:2007
$27.95
Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
| Published By | Publication Date | Number of Pages |
| ISO | 2007-11 | 18 |
ISO 14113:2007 specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied and dissolved gases up to a maximum working pressure of 45 MPa (450 bar), within the ambient temperature range of – 20 °C to + 60 °C.
ISO 14113:2007 applies to hose assemblies used to connect industrial gas cylinders to manifolds or bundles prior to any pressure reduction stage.
ISO 14113:2007 does not cover rubber or thermoplastic hoses for welding, cutting and allied processes (see ISO 3821 and ISO 12170).
ISO 14113:2007 does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG).
Related products
-
ISO 14813-6:2009
Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 6: Data…
-
ISO 14813-1:2007
Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 1: ITS…
-
ISO 18113-1:2009
In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1:…
-
BS ISO 11413:2008:2009 Edition
Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and…
-
ISO/TR 14813-3:2000
Transport information and control systems — Reference model architecture(s) for the TICS sector — Part…
-
ISO 15113:2005
Caoutchouc — Détermination des propriétés frictionnelles Published By Publication Date Number of Pages ISO 2005-10…
-
ISO 18113-5:2009
In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 5:…
-
ISO 14118:2017
Safety of machinery — Prevention of unexpected start-up Published By Publication Date Number of Pages…
-
BS ISO 14133-2:2006
Optics and optical instruments. Specifications for binoculars, monoculars and spotting scopes – High performance instruments…
-
ISO 14131:2005
Agricultural sprayers — Boom steadiness — Test methods Published By Publication Date Number of Pages…
-
ISO 14183:2005
Animal feeding stuffs — Determination of monensin, narasin and salinomycin contents — Liquid chromatographic method…
-
BS EN ISO 19113:2005
Geographic information. Quality principles Published By Publication Date Number of Pages BSI 2005 40
-
BS EN ISO 14113:2008
Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases…
-
BS ISO 14813-1:2007
Intelligent transport systems. Reference model architecture(s) for the ITS sector – ITS service domains, service…
-
ISO 14114:2017
Matériel de soudage aux gaz — Centrales de détente pour la distribution d’acétylène pour le…
-
ISO 14513:2006
Road vehicles — Pedestrian protection — Head impact test method Published By Publication Date Number…
-
ISO 14713-3:2017
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel…
-
BS EN ISO 14116:2008
Protective clothing. Protection against heat and flame. Limited flame spread materials, material assemblies and clothing…
-
ISO 14713-2:2009
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel…
-
ISO 14713-3:2009
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel…
-
BS ISO 14513:2006:2007 Edition
Road vehicles. Pedestrian protection. Head impact test method Published By Publication Date Number of Pages…
-
BS ISO 14813-6:2009
Intelligent transport systems. Reference model architecture(s) for the ITS sector – Data presentation in ASN.1…
-
ISO 19113:2002
Geographic information — Quality principles Published By Publication Date Number of Pages ISO 2002-12 36
-
ISO 14116:2008
Protective clothing — Protection against heat and flame — Limited flame spread materials, material assemblies…
-
ISO 14118:2000
Safety of machinery — Prevention of unexpected start-up Published By Publication Date Number of Pages…
-
ISO 18113-2:2009
In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 2:…
-
ISO 18113-4:2009
In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 4:…
-
ISO 14813-6:2017
Intelligent transport systems — Reference model architecture(s) for the ITS sector — Part 6: Use…
-
ISO 14313:2007
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves Published By Publication…
-
BS ISO 14813-6:2017
Intelligent transport systems. Reference model architecture(s) for the ITS sector – Use of ASN.1 Published…
-
ISO 11413:2008
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe…
-
ISO 14133-2:2006
Optics and optical instruments — Specifications for binoculars, monoculars and spotting scopes — Part 2:…
-
ISO/TR 14813-6:2000
Transport information and control systems — Reference model architecture(s) for the TICS sector — Part…
-
ISO 18113-3:2009
Dispositifs médicaux de diagnostic in vitro — Informations fournies par le fabricant (étiquetage) — Partie…
-
BS ISO 15113:2005
Rubber. Determination of frictional properties Published By Publication Date Number of Pages BSI 2005 30
-
ISO 14133-1:2006
Optics and optical instruments — Specifications for binoculars, monoculars and spotting scopes — Part 1:…
-
ISO 14713-1:2017
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel…
-
BS ISO/IEC 14143-1:2007:2012 Edition
Information technology. Software measurement. Functional size measurement – Definition of concepts Published By Publication Date…
-
ISO 10113:2006
Metallic materials — Sheet and strip — Determination of plastic strain ratio Published By Publication…
-
ISO 14713-1:2009
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel…
