ISO 15024:2001
$36.40
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
| Published By | Publication Date | Number of Pages |
| ISO | 2001-12 | 30 |
1.1 This International Standard specifies a method for the determination of mode I interlaminar fracture
toughness (critical energy release rate), GIC, of unidirectional fibre-reinforced plastic composites using a double
cantilever beam (DCB) specimen.
1.2 It is applicable to carbon-fibre-reinforced and glass-fibre-reinforced thermosets and thermoplastics.
Related products
-
BS ISO/IEC 15424:2000
Information technology. Automatic identification and data capture techniques. Data Carrier Identifiers (including Symbology Identifiers) Published…
-
ISO/TS 15624:2001
Transport information and control systems — Traffic Impediment Warning Systems (TIWS) — System requirements Published…
-
BS EN ISO 15324:2008
Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test…
-
ISO/IEC 15424:2008
Information technology — Automatic identification and data capture techniques — Data Carrier Identifiers (including Symbology…
-
BS ISO/IEC 15424:2008:2012 Edition
Information technology. Automatic identification and data capture techniques. Data Carrier Identifiers (including Symbology Identifiers) Published…
-
BS ISO 15014:2007:2009 Edition
Plastics. Extruded sheets of poly(vinylidene fluoride) (PVDF). Requirements and test methods Published By Publication Date…
-
ISO 15014:2007
Plastiques — Plaques extrudées en poly(fluorure de vinylidène) (PVDF) — Exigences et méthodes d’essai Published…
-
ISO 15064:2010
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the…
-
ISO 10524-2:2005
Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators…
-
ISO 10524-3:2005
Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder…
-
ISO 15025:2000
Protective clothing — Protection against heat and flame — Method of test for limited flame…
-
ISO 15004-1:2006
Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to…
-
ISO 16024:2005
Personal protective equipment for protection against falls from a height — Flexible horizontal lifeline systems…
-
BS ISO 15034:2000
Composites. Prepregs. Determination of resin flow Published By Publication Date Number of Pages BSI 2000…
-
AS/NZS ISO 15004:2002
Ophthalmic instruments – Fundamental requirements and test methods Published By Publication Date Number of Pages…
-
BS ISO 15724:2001
Metallic and other inorganic coatings. Electrochemical measurement of diffusible hydrogen in steels. Barnacle electrode method…
-
ISO 15042:2011
Multiple split-system air-conditioners and air-to-air heat pumps — Testing and rating for performance Published By…
-
ISO 15084:2003
Petits navires — Mouillage, amarrage et remorquage — Points d’ancrage Published By Publication Date Number…
-
BS EN ISO 1524:2002:2003 Edition
Paints, varnishes and printing inks. Determination of fineness of grind Published By Publication Date Number…
-
BS EN ISO 15025:2002
Protective clothing. Protection against heat and flame. Method of test for limited flame spread Published…
-
ISO/IEC 15026-3:2011
Systems and software engineering — Systems and software assurance — Part 3: System integrity levels…
-
BS ISO 15028:2004:2006 Edition
Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of hydrolysable chlorine Published…
-
ISO 10524-4:2008
Pressure regulators for use with medical gases — Part 4: Low-pressure regulators Published By Publication…
-
BS ISO 15024:2001:2002 Edition
Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials…
-
BS ISO 15025:2000
Protective clothing. Protection against heat and flame. Method of test for limited flame spread Published…
-
ISO/IEC 15026-2:2011
Systems and software engineering — Systems and software assurance — Part 2: Assurance case Published…
-
BS ISO 15064:2010:2011 Edition
Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of the isomer ratio…
-
AS ISO/IEC 15424:2006
Information technology – Automatic identification and data capture techniques – Data Carrier Identifiers (including Symbology…
-
ISO/IEC TR 15044:2000
Information technology — Terminology for the Home Electronic System (HES) Published By Publication Date Number…
-
ISO 15023-1:2001
Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 1: Designation system and basis for specifications…
-
ISO 15724:2001
Revêtements métalliques et autres revêtements inorganiques — Mesurage électrochimique de l’hydrogène diffusible dans les aciers…
-
ISO 15028:2004
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of hydrolysable…
-
BS ISO 15064:2004:2006 Edition
Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of the isomer ratio…
-
BS EN ISO 14024:2001
Environmental labels and declarations. Type I environmental labelling. Principles and procedures Published By Publication Date…
-
ISO 15324:2000
Corrosion des métaux et alliages — Évaluation de la résistance à la fissuration par corrosion…
-
ISO/TS 10303-1502:2004
Industrial automation systems and integration — Product data representation and exchange — Part 1502: Application…
-
ISO 15023-2:2003
Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 2: Determination of properties Published By Publication…
-
ISO 15524:2011
Pneumatic fluid power — Cylinders — Single-rod short-stroke cylinders, 1 000 kPa (10 bar) series,…
-
ISO 15004-2:2007
Ophthalmic instruments — Fundamental requirements and test methods — Part 2: Light hazard protection Published…
-
ISO 10524-1:2006
Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators…
