ISO 16589-4:2011
$27.95
Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures
| Published By | Publication Date | Number of Pages |
| ISO | 2011-04 | 22 |
ISO 16589 specifies seals utilizing sealing elements manufactured from suitably formulated compounds based on thermoplastic materials, such as polytetrafluoroethylene (PTFE). They are considered suitable for use under low-pressure conditions.
ISO 16589-4:2011 specifies general performance tests which can be used for seal qualification purposes. Materials quality control, dynamic testing, and supplementary low-temperature testing requirements are covered.
Related products
-
ISO 18589-4:2019
Measurement of radioactivity in the environment — Soil — Part 4: Plutonium 238 and plutonium…
-
BS ISO 18589-2:2022:2023 Edition
Measurement of radioactivity in the environment. Soil – Guidance for the selection of the sampling…
-
BS ISO 16549:2004:2005 Edition
Textiles. Unevenness of textile strands. Capacitance method Published By Publication Date Number of Pages BSI…
-
BS EN ISO 18589-3:2024
Measurement of radioactivity in the environment. Soil – Test method of gamma-emitting radionuclides using gamma-ray…
-
BS ISO 16889:2022
Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter…
-
BS EN ISO 15589-2:2014
Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems – Offshore pipelines…
-
BS ISO 1658:2015
Natural rubber (NR). Evaluation procedure Published By Publication Date Number of Pages BSI 2015 26
-
BS EN ISO 16859-3:2015
Metallic materials. Leeb hardness test – Calibration of reference test blocks Published By Publication Date…
-
BS ISO 16581:2014
Resilient and laminate floor coverings. Determination of the effect of simulated movement of a furniture…
-
BSI 21/30405775 DC:2021 Edition
BS EN ISO 16189. Footwear. Critical substances potentially present in footwear and footwear components. Test…
-
BS EN ISO 16859-2:2015
Metallic materials. Leeb hardness test – Verification and calibration of the testing devices Published By…
-
BSI 14/30235909 DC:2014 Edition
BS ISO 16598. Timber structures. Structural classification for sawn timber Published By Publication Date Number…
-
ISO 16589-3:2011
Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation…
-
BS EN ISO 14589:2001:2004 Edition
Blind rivets. Mechanical testing Published By Publication Date Number of Pages BSI 2004 24
-
BS EN ISO 18589-6:2021
Measurement of radioactivity in the environment. Soil – Gross alpha and gross beta activities. Test…
-
BS EN ISO 16581:2019
Resilient and laminate floor coverings. Determination of the effect of simulated movement of a furniture…
-
BS EN ISO 16089:2015:2016 Edition
Machine tools. Safety. Stationary grinding machines Published By Publication Date Number of Pages BSI 2016…
-
BS EN ISO 18589-5:2021
Measurement of radioactivity in the environment. Soil – Strontium 90. Test method using proportional counting…
-
BSI PD ISO/TR 16689:2012
Anodizing of aluminium and its alloys. Experimental research on possible alternative sealing quality test methods…
-
BS ISO 16549:2021
Textiles. Unevenness of textile strands. Capacitance method Published By Publication Date Number of Pages BSI…
-
BS ISO 1658:2009
Natural rubber (NR). Evaluation procedure Published By Publication Date Number of Pages BSI 2009 26
-
BS EN ISO 18589-1:2021
Measurement of radioactivity in the environment. Soil – General guidelines and definitions Published By Publication…
-
BS EN ISO 10195:2021
Leather. Chemical determination of chromium(VI) content in leather. Thermal pre-ageing of leather and determination of…
-
UNE-EN ISO 18589-4:2021
Measurement of radioactivity in the environment – Soil – Part 4: Plutonium 238 and plutonium…
-
BS EN ISO 18589-2:2024
Measurement of radioactivity in the environment. Soil – Guidance for the selection of the sampling…
-
BSI 21/30441990 DC:2021 Edition
BS ISO 18589-2. Measurement of radioactivity in the environment. Soil – Part 2. Guidance for…
-
BS EN ISO 18589-4:2021
Measurement of radioactivity in the environment. Soil – Plutonium 238 and plutonium 239 + 240.…
-
ISO 16589-4:2001
Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures Published…
-
BS EN ISO 16859-1:2015
Metallic materials. Leeb hardness test – Test method Published By Publication Date Number of Pages…
-
BS EN ISO 11929-3:2021
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval)…
-
ISO 16589-5:2011
Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 5: Identification of visual imperfections…
-
BSI PD CEN ISO/TS 16189:2013
Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine…
-
BS EN ISO 15589-1:2017:2018 Edition
Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline systems – On-land pipelines Published…
-
ISO 16589-2:2011
Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 2: Vocabulary Published By Publication…
-
ISO 16589-1:2011
Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances…
-
BS EN ISO 16189:2021
Footwear. Critical substances potentially present in footwear and footwear components. Test method to quantitatively determine…
-
BS EN ISO 16539:2022
Corrosion of metals and alloys. Accelerated cyclic corrosion tests with exposure to synthetic ocean water…
-
BS EN ISO 16559:2014
Solid biofuels. Terminology, definitions and descriptions Published By Publication Date Number of Pages BSI 2014…
-
BS ISO 1658:2022
Natural rubber (NR) – Evaluation procedure Published By Publication Date Number of Pages BSI 2022…
-
BS EN ISO 15589-2:2024
Oil and gas industries including lower carbon energy. Cathodic protection of pipeline transportation systems –…
