ISO 1897-2:1977
$12.35
Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Methods of test — Part 2: Determination of water — Dean and Stark method
| Published By | Publication Date | Number of Pages |
| ISO | 1977-04 | 7 |
The principle of the method is based on distillation of a test portion in the presence of an appropriate solvent, in a Dean and Stark apparatus. Determination of the volume of condensate collected in the receiver tube, brought to ambient temperature, assuming this liquid to be water. An appropriate solvent is xylene, solvent naphtha or alternatively, toluene. ISO 1897-2 replaces ISO/R 1898-1971.
Related products
-
ISO 3386-2:1997
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density…
-
ISO 1797-2:1992
Dental rotary instruments — Shanks — Part 2: Shanks made of plastics Published By Publication…
-
ISO 1940-2:1997
Mechanical vibration — Balance quality requirements of rigid rotors — Part 2: Balance errors Published…
-
BS ISO 3977-2:1997:2008 Edition
Gas turbines. Procurement – Standard reference conditions and ratings Published By Publication Date Number of…
-
ISO 10012-2:1997
Quality assurance for measuring equipment — Part 2: Guidelines for control of measurement processes Published…
-
ISO 1635-2:1987
Seamless wrought copper and copper alloy tube — Part 2: Technical conditions of delivery for…
-
ISO 2039-2:1987
Plastiques — Détermination de la dureté — Partie 2: Dureté Rockwell Published By Publication Date…
-
ISO 90-2:1997
Light gauge metal containers — Definitions and determination of dimensions and capacities — Part 2:…
-
ISO 7784-2:1997
Paints and varnishes — Determination of resistance to abrasion — Part 2: Rotating abrasive rubber…
-
ISO 7376-2:1997
Laryngoscopic fittings — Part 2: Miniature electric lamps — Screw threads and sockets for conventional…
-
ISO 690-2:1997
Information and documentation — Bibliographic references — Part 2: Electronic documents or parts thereof Published…
-
ISO 11315-2:1997
Photography — Projection in indoor rooms — Part 2: Screen luminance test for still and…
-
ISO 7805-2:1987
Tôles perforées pour tamisage industriel — Partie 2: Épaisseur inférieure à 3 mm Published By…
-
ISO 14269-2:1997
Tracteurs et machines automotrices pour l’agriculture et la sylviculture — Ambiance dans l’enceinte de l’opérateur…
-
ISO 10599-2:1997
Car radios — Coaxial aerial connectors — Part 2: Characteristic values, performance requirements and tests…
-
ISO 3046-2:1987
Reciprocal internal combustion engines — Performance — Part 2: Test methods Published By Publication Date…
-
ISO 2020-2:1997
Aerospace — Preformed flexible steel wire rope for aircraft controls — Part 2: Technical specification…
-
ISO 10131-2:1997
Foldaway beds — Safety requirements and tests — Part 2: Test methods Published By Publication…
-
ISO 3553-2:1997
Road vehicles — High-tension connectors for ignition coils and distributors — Part 2: Plug-types Published…
-
ISO 228-2:1987
Pipe threads where pressure-tight joints are not made on the threads — Part 2: Verification…
-
ISO 13441-2:1997
Pulvérisateurs agricoles à jet porté — Fiches techniques — Partie 2: Spécifications techniques relatives aux…
-
ISO 6741-2:1987
Textiles — Fibres et fils — Détermination de la masse commerciale d’un lot — Partie…
-
ISO 3550-2:1997
Cigarettes — Détermination de la perte de tabac par les extrémités — Partie 2: Méthode…
-
ISO 4548-2:1997
Méthodes d’essai des filtres à huile de lubrification à passage intégral pour moteurs à combustion…
-
ISO 8630-2:1987
Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified…
-
ISO 10472-2:1997
Exigences de sécurité pour les machines de blanchisserie industrielle — Partie 2: Machines à laver…
-
ISO 8037-2:1997
Optique et instruments d’optique — Microscopes — Lames porte-objet — Partie 2: Qualité des matériaux,…
-
ISO 8555-2:1987
Articles de quincaillerie pour meubles — Termes pour ferrures de meubles — Partie 2: Charnières…
-
ISO 8554-2:1987
Hardware for furniture — Terms for furniture locks — Part 2: Surface-mounted lock, inset-type lock,…
-
ISO 1328-2:1997
Cylindrical gears — ISO system of accuracy — Part 2: Definitions and allowable values of…
-
ISO 2533:1975/Add 2:1997
Standard Atmosphere — Addendum 2: Extension to – 5000 m and standard atmosphere as a…
-
ISO/TTA 2:1997
Tensile tests for discontinuously reinforced metal matrix composites at ambient temperatures Published By Publication Date…
-
ISO 5755-2:1987
Sintered metal materials — Specifications — Part 2: Sintered iron and sintered steel containing one…
-
ISO 4037-2:1997
X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their…
-
ISO 5782-2:1997
Pneumatic fluid power — Compressed-air filters — Part 2: Test methods to determine the main…
-
ISO 1823-2:1997
Rubber hoses and hose assemblies — Part 2: Ship/dockside discharge — Specification Published By Publication…
-
ISO 10161-2:1997
Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part…
-
ISO 3977-2:1997
Gas turbines — Procurement — Part 2: Standard reference conditions and ratings Published By Publication…
-
ISO 1634-2:1987
Wrought copper and copper alloy plate, sheet and strip — Part 2: Technical conditions of…
-
ISO 8442-2:1997
Matériaux et objets en contact avec les denrées alimentaires — Coutellerie et orfèvrerie de table…
