ISO 19976-2:2019
$19.50
Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method
Published By | Publication Date | Number of Pages |
ISO | 2019-07 | 18 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This document specifies an acid digestion and inductively coupled plasma atomic emission spectrometric (ICP-AES) method for the determination of the mass fraction of cadmium in copper, lead and zinc sulfide concentrates as follows:
a) for copper sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %;
b) for lead sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,01 % to 0,30 %;
c) for zinc sulfide concentrates, the method is applicable to the determination of mass fractions of cadmium from 0,05 % to 1,00 %.
Published Code | ISO |
---|---|
Published By | International Organization for Standardization |
Publication Date | 2019-07 |
Pages Count | 18 |
Language | English |
Edition | 1 |
File Size | 1.2 MB |
ICS Codes | 73.060.99 - Other metalliferous minerals |
Related products
-
ISO 22282-2:2012
Geotechnical investigation and testing — Geohydraulic testing — Part 2: Water permeability tests in a…
-
ISO 19967-2:2019
Heat pump water heaters — Testing and rating for performance — Part 2: Heat pump…
-
BS EN 836:1997+A4:2011
Garden equipment. Powered lawnmowers. Safety Published By Publication Date Number of Pages BSI 2011 94
-
IEC 60268-7:2010
Sound system equipment – Part 7: Headphones and earphones Published By Publication Date Number of…
-
ASA S12.62 2012 ISO 9613 2 1996 MOD RA 2020
ANSI/ASA S12.62-2012 / ISO 9613-2:1996 (MOD) (R2020) – American National Standard Acoustics – Attenuation of…
-
BS EN ISO 7083:2021 – TC
Tracked Changes. Technical product documentation. Symbols used in technical product documentation. Proportions and dimensions Published…
-
ISO 17892-3:2015
Geotechnical investigation and testing — Laboratory testing of soil — Part 3: Determination of particle…
-
JIS Z 8731:2019
Acoustics—Description and measurement of environmental noise Published By Publication Date Number of Pages JIS 2019-06-20…
-
ISO 19976-1:2019
Copper, lead and zinc sulfide concentrates — Determination of cadmium — Part 1: Flame atomic…
-
BS EN IEC 60704-2-7:2020
Household and similar electrical appliances. Test code for the determination of airborne acoustical noise –…
-
BSI DD ISO/TS 16976-2:2010:2013 Edition
Respiratory protective devices. Human factors – Anthropometrics Published By Publication Date Number of Pages BSI…
-
ISO 22477-4:2018
Geotechnical investigation and testing — Testing of geotechnical structures — Part 4: Testing of piles:…
-
BSI PD CEN ISO/TR 9241-100:2023 – TC
Tracked Changes. Ergonomics of human-system interaction – Overview of ISO 9241 software ergonomic standards Published…
-
ISO 1996-2:2017
Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of sound…
-
DIN EN 13203-3:2021 Edition
Solar supported gas-fired domestic appliances producing hot water – Appliances not exceeding 70 kW heat…
-
BS ISO 19976-2:2019
Copper, lead and zinc sulfide concentrates. Determination of cadmium – Acid digestion and inductively coupled…
-
ISO 19926-1:2019
Meteorology — Weather radar — Part 1: System performance and operation Published By Publication Date…
-
AS ISO 19976.1:2020
Copper, lead and zinc sulfide concentrates – Determination of cadmium – Flame atomic absorption spectrometric…
-
CIE 220:2016
Characterization and Calibration Methods of UV Radiometers Published By Publication Date Number of Pages CIE…
-
IEC 60704-2-7:2020
Household and similar electrical appliances – Test code for the determination of airborne acoustical noise…
-
ISO 19973-2:2015
Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control…
-
BSI 15/30289062 DC:2015 Edition
BS ISO 1996-2. Acoustics. Description, measurement and assessment of environmental noise. Part 2. Determination of…
-
SA TS ISO 16976.2:2015
Respiratory protective devices – Human factors – Anthropometrics Published By Publication Date Number of Pages…
-
BS EN 280-1:2022
Mobile elevating work platforms – Design calculations. Stability criteria. Construction. Safety. Examinations and tests Published…
-
IEC 60598-2-22:2014
Luminaires – Part 2-22: Particular requirements – Luminaires for emergency lighting Published By Publication Date…
-
BSI 21/30426931 DC:2021 Edition
BS EN 13203-3. Solar supported gas-fired domestic appliances producing hot water. Appliances not exceeding 70…
-
AS ISO 19976.2:2020
Copper, lead and zinc sulfide concentrates – Determination of cadmium – Acid digestion and inductively…
-
PIN4 96 1996
OSHPD PIN 4 – Review of Existing Facilities for Airborne Infection Isolation Rooms and Projects…
-
BSI PD ISO/TS 16976-2:2015 – TC:2020 Edition
Tracked Changes. Respiratory protective devices. Human factors – Anthropometrics Published By Publication Date Number of…
-
ISO/TS 16976-2:2015
Respiratory protective devices — Human factors — Part 2: Anthropometrics Published By Publication Date Number…
-
ISO 3386-2:1997/Amd 1:2010
Flexible cellular polymeric materials — Determination of stress-strain characteristics in compression — Part 2: High-density…
-
ASA S12.62 2012
ANSI/ASA S12.62-2012 / ISO 9613-2:1996 (MOD) (R2017) American National Standard Acoustics -Attenuation of sound during…
-
AGMA 2015-2-B15
Gear Tooth Flank Tolerance Classification System – Definitions and Allowable Values of Double Flank Radial…
-
BSI PD ISO/TS 16976-2:2015
Respiratory protective devices. Human factors – Part 2: Anthropometrics Published By Publication Date Number of…
-
ISO/TS 16976-2:2010
Respiratory protective devices — Human factors — Part 2: Anthropometrics Published By Publication Date Number…
-
BSI PD CEN ISO/TR 9241-100:2023
Ergonomics of human-system interaction – Overview of ISO 9241 software ergonomic standards Published By Publication…
-
ISO 19973-3:2015
Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders with…
-
BS ISO 19976-1:2019
Copper, lead and zinc sulfide concentrates. Determination of cadmium – Flame atomic absorption spectrometric method…
-
CAN/CSA-Z19905-1:16:2016 Edition
Petroleum and natural gas industries – Site-specific assessment of mobile offshore units – Part 1:…
-
ISO 22282-4:2012
Geotechnical investigation and testing — Geohydraulic testing — Part 4: Pumping tests Published By Publication…