ISO 20712-3:2014
$41.60
Water safety signs and beach safety flags — Part 3: Guidance for use
Published By | Publication Date | Number of Pages |
ISO | 2014-03 | 36 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
ISO 20712-3:2014 gives guidance for the selection and use of water safety signs as specified in ISO 20712-1 and beach safety flags as specified in ISO 20712-2, in aquatic environments. It provides guidance on their location, mounting positions, lighting and maintenance. It also provides guidance on the design and location of multiple signs.
ISO 20712-3:2014 does not apply to traffic signs for use on the public highway or maritime signalling. It is not applicable to flags for use on firing ranges or to flags used to indicate water quality. It does not cover means of escape signs and their illumination which may be present.
Published Code | ISO |
---|---|
Published By | International Organization for Standardization |
Publication Date | 2014-03 |
Pages Count | 36 |
Language | English |
Edition | 2 |
File Size | 2.0 MB |
Related products
-
ISO 13209-3:2012
Road vehicles — Open Test sequence eXchange format (OTX) — Part 3: Standard extensions and…
-
ISO 16900-3:2012
Appareils de protection respiratoire — Méthodes d’essai et équipement d’essai — Partie 3: Détermination de…
-
ISO 12782-3:2012
Soil quality — Parameters for geochemical modelling of leaching and speciation of constituents in soils…
-
ISO 13374-3:2012
Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 3:…
-
ISO 17420-3:2012
Respiratory protective devices — Performance requirements — Part 3: Thread connection Published By Publication Date…
-
ISO 16486-3:2012/Amd 1:2014
Plastics piping systems for the supply of gaseous fuels – Unplasticized polyamide (PA-U) piping systems…
-
ISO 6363-3:2012
Wrought aluminium and aluminium alloys — Cold-drawn rods/bars, tubes and wires — Part 3: Drawn…
-
ISO 7010:2011/Amd 3:2012
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 3…
-
ISO 25178-3:2012
Spécification géométrique des produits (GPS) — État de surface: Surfacique — Partie 3: Opérateurs de…
-
ISO 16750-3:2012
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3:…
-
ISO 27145-3:2012
Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3:…
-
ISO 16014-3:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion…
-
ISO 11148-3:2012
Hand-held non-electric power tools — Safety requirements — Part 3: Drills and tappers Published By…
-
ISO 7176-3:2012
Wheelchairs — Part 3: Determination of effectiveness of brakes Published By Publication Date Number of…
-
BS ISO 20712-3:2014
Water safety signs and beach safety flags – Guidance for use Published By Publication Date…
-
ISO 14824-3:2012
Grout for prestressing tendons — Part 3: Test methods Published By Publication Date Number of…
-
ISO 20462-3:2012
Photography — Psychophysical experimental methods for estimating image quality — Part 3: Quality ruler method…
-
ISO 15027-3:2012
Combinaisons de protection thermique en cas d’immersion — Partie 3: Méthodes d’essai Published By Publication…
-
ISO 22282-3:2012
Reconnaissance et essais géotechniques — Essais géo hydrauliques — Partie 3: Essais de pression d’eau…
-
ISO 15886-3:2012
Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods Published…
-
ISO 16486-3:2012
Plastics piping systems for the supply of gaseous fuels – Unplasticized polyamide (PA-U) piping systems…
-
ISO 3548-3:2012
Plain bearings — Thin-walled half bearings with or without flange — Part 3: Measurement of…
-
ISO 6362-3:2012
Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded…
-
ISO 19005-3:2012
Document management — Electronic document file format for long-term preservation — Part 3: Use of…
-
ISO 13175-3:2012
Implants chirurgicaux — Phosphates de calcium — Partie 3: Substituts osseux à base d’hydroxyapatite et…
-
ISO 3864-3:2012
Symboles graphiques — Couleurs de sécurité et signaux de sécurité — Partie 3: Principes de…
-
ISO 2812-3:2012
Paints and varnishes — Determination of resistance to liquids — Part 3: Method using an…
-
ISO 7870-3:2012
Control charts — Part 3: Acceptance control charts Published By Publication Date Number of Pages…
-
ISO 5609-3:2012
Porte-plaquette de tournage intérieur à queue cylindrique pour plaquettes amovibles — Partie 3: Forme K…
-
ISO 6855-3:2012
Mopeds — Measurement method for gaseous exhaust emissions and fuel consumption — Part 3: Fuel…
-
ISO 18436-3:2012
Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel —…
-
ISO/IEC 23003-3:2012/Amd 3:2016
Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding —…
-
ISO 5667-3:2012
Water quality — Sampling — Part 3: Preservation and handling of water samples Published By…
-
ISO 10685-3:2012
Ophthalmic optics — Spectacle frames and sunglasses electronic catalogue and identification — Part 3: Technical…
-
ISO 8253-3:2012
Acoustics — Audiometric test methods — Part 3: Speech audiometry Published By Publication Date Number…
-
ISO 16145-3:2012
Ships and marine technology — Protective coatings and inspection method — Part 3: Cargo oil…
-
ISO 14934-3:2012
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration…
-
ISO 630-3:2012
Structural steels — Part 3: Technical delivery conditions for fine-grain structural steels Published By Publication…
-
ISO 15500-3:2012
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 3: Check valve…
-
ISO 6182-3:2012
Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry…