ISO 2336-1:1996
$13.00
Lames de scies droites à métaux — Partie 1: Dimensions des lames à main
| Published By | Publication Date | Number of Pages |
| ISO | 1996-04 | 8 |
Specifies the dimensions of hand hacksaw blades. It is valid for single edge blades of length equal to 300 mm, the tooth pitch of which is no greater than 1,4 mm.
Related products
-
BS 3531-5.3:1991
Implants for osteosynthesis. Bone screws and auxiliary equipment – Specification for the dimensions of screws…
-
BS 4325-12:1996
Methods for analysis of oilseed residues – Determination of glucosinolates content by high-performance liquid chromatography…
-
BS ISO/IEC 10514-2:1998:1999 Edition
Information technology. Programming languages – Modula-2, generics in Modula-2 Published By Publication Date Number of…
-
BS EN ISP 10613-4:1997:1995 Edition
Information technology. International standardized profile RA. Relaying the connectionless-mode network service – FDDI LAN subnetwork-dependent,…
-
BS EN ISO 7278-2:1996:1990 Edition
Liquid hydrocarbons. Dynamic measurement. Proving systems for volumetric meters – Pipe provers Published By Publication…
-
BS ISO 2836:2004 2008
Graphic technology. Prints and printing inks. Assessment of resistance to various agents Published By Publication…
-
ISO 13691:2001
Petroleum and natural gas industries — High-speed special-purpose gear units Published By Publication Date Number…
-
BSI PAS 132:2007:1969 Edition
Terminology for the bio-nano interface Published By Publication Date Number of Pages BSI 1969 18
-
BS EN 29899:1993:1991 Edition
Programming languages. C Published By Publication Date Number of Pages BSI 1991 236
-
BS EN ISP 11185-3:1996:1995 Edition
Information technology. International standardized profiles FVT2nn. Virtual terminal basic class. Register of control object type…
-
BS EN ISO 8754:1995
Methods of test for petroleum and its products. Petroleum products. Determination of sulfur content. Energy-dispersive…
-
BS ISO 9336-1:1994:1995 Edition
Optics and optical instruments. Application. Optical transfer function – Interchangeable lenses for 35 mm still…
-
BS ISO 6336-1:1996:1999 Edition
Calculation of load capacity of spur and helical gears – Basic principles, introduction and general…
-
BS ISO 2836:1999:2003 Edition
Graphic technology. Prints and printing inks. Assessment of resistance to various agents Published By Publication…
-
BS ISO/IEC 10173:1991:1994 Edition
Information technology. Integrated services digital network (ISDN) primary access connector at reference points S and…
-
BS EN ISO 9614-2:1997
Acoustics. Determination of sound power levels of noise sources using sound intensity – Measurement by…
-
BS 5639-4:1978
Fork arms for fork lift trucks – Specification for technical characteristics and testing Published By…
-
BS 7228-4-4.1:1991
Industrial robots. Performance criteria and testing – Methods for comprehensive testing Published By Publication Date…
-
BS 2000-336:1993
Methods of test for petroleum and its products – Petroleum products. Determination of sulfur content.…
-
BS EN 22339:1992
Taper pins, unhardened Published By Publication Date Number of Pages BSI 1992 12
-
AGMA 923-B05:2005 Edition
Metallurgical Specifications for Steel Gearing Published By Publication Date Number of Pages AGMA 2005 38
-
BS EN 25163:1994
Methods of test for petroleum and its products. Motor and aviation-type fuels. Determination of knock…
-
BS ISO 2936:1995:1996 Edition
Assembly tools for screws and nuts. Hexagon socket screw keys Published By Publication Date Number…
-
BS ISO 6336-3:1996:1997 Edition
Calculation of load capacity of spur and helical gears – Calculation of tooth bending strength…
-
BS EN 10149-2:1996
Specification for hot-rolled flat products made of high yield strength steels for cold forming –…
-
BS ISO 9336-3:1994:1995 Edition
Optics and optical instruments. Application. Optical transfer function – Telescopes Published By Publication Date Number…
-
BS ISO 6198:1993:1994 Edition
Micrographics. Readers for transparent microforms. Performance characteristics Published By Publication Date Number of Pages BSI…
-
JIS B 1354:2012
Parallel pins Published By Publication Date Number of Pages JIS 2012-04-20 12
-
BS 7755-3.4:1995:1997 Edition
Soil quality. Chemical methods – Determination of the specific electrical conductivity Published By Publication Date…
-
BS ISO 6336-2:1996:1999 Edition
Calculation of load capacity of spur and helical gears – Calculation of surface durability (pitting)…
-
BS EN ISO 3746:1996
Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using…
-
BS EN ISO 2871-2:1994
Surface active agents. Detergents. Determination of cationic-active matter content – Cationic-active matter of low molecular…
-
BS 2M 72:1996
Air cargo equipment. Minimum airworthiness requirements and test conditions for certified air cargo unit load…
-
ISO 236-1:1976
Hand reamers Published By Publication Date Number of Pages ISO 1976-11 6
-
BS 7012-6:1998
Light microscopes – Specification for spectral filters Published By Publication Date Number of Pages BSI…
-
BS EN ISO 2338:1998
Parallel pins of unhardened steel and austenitic stainless steel Published By Publication Date Number of…
-
BS ISO/IEC 9075-3:1995:1997 Edition
Information technology. Database languages. SQL – Call-Level Interface (SQL/CLI) Published By Publication Date Number of…
-
ISO 2736-1:1986
Concrete tests — Test specimens — Part 1: Sampling of fresh concrete Published By Publication…
-
BS EN 22338:1992
Parallel pins, unhardened Published By Publication Date Number of Pages BSI 1992 12
-
IEEE 1003.1, 2004 Edition
IEEE Standard for Information Technology – Portable Operating System Interface (POSIX(TM)) – Base Definitions Published…
