ISO 2772-2:1974
$19.50
Test conditions for box type vertical drilling machines — Testing of the accuracy — Part 2: Practical test
| Published By | Publication Date | Number of Pages |
| ISO | 1974-03 | 5 |
Specifies the pratical test to be carried out for checking these drilling machines and is a continuation of ISO 2772-1. The annex shows a graph giving the axial force F as a function of the drilling capacity of the machine.
Related products
-
BS 4583:1991
Methods of test for higher alcohols for industrial use Published By Publication Date Number of…
-
BS 2782-7 Method 732A:1991
Methods of testing plastics. Rheological properties – Determination of viscosity number:general conditions Published By Publication…
-
BS 2782-3:Method 352F:1996
Methods of testing plastics. Mechanical properties – Determination of impact resistance by the free-falling dart…
-
BS EN ISO 877:1997:1996 Edition
Plastics. Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified…
-
BS 2782:1970:1987 Edition
Methods of testing plastics Published By Publication Date Number of Pages BSI 1987 46
-
ISO 2572:1982
Textile machinery and accessories — Card gauges Published By Publication Date Number of Pages ISO…
-
BS 1344-2:1975:1976 Edition
Methods of testing vitreous enamel finishes – Resistance to citric acid at room temperature Published…
-
BS 4395-3:1973:1975 Edition
Specification for high strength friction grip bolts and associated nuts and washers for structural engineering…
-
BS EN ISO 176:2000
Plastics. Determination of loss of plasticizers. Activated carbon method Published By Publication Date Number of…
-
BS 2782-1 Method 141:1986
Methods of testing plastics. Thermal properties – Determination of flammability by oxygen index Published By…
-
BS EN ISO 119:1998:1978 Edition
Plastics. Phenol-formaldehyde mouldings. Determination of free phenols. Iodometric method Published By Publication Date Number of…
-
BS 3884-1:1974
Modular units for machine tools – Specification for basic units Published By Publication Date Number…
-
BS 2782-3:Method 323D:1996:2007 Edition
Methods of testing plastics – Mechanical properties – Torsional vibration. Non-resonance method Published By Publication…
-
BS EN 578:1994
Plastics piping systems. Plastics pipes and fittings. Determination of the opacity Published By Publication Date…
-
BS EN ISO 527-2:1996:1994 Edition
Plastics. Determination of tensile properties – Test conditions for moulding and extrusion plastics Published By…
-
BS 1344-8:1984
Methods of testing vitreous enamel finishes – Determination of resistance to boiling citric acid Published…
-
BS EN ISO 2702:1995
Heat-treated steel tapping screws. Mechanical properties Published By Publication Date Number of Pages BSI 1995…
-
BS 2782-3 Method 350:1984
Methods of testing plastics. Mechanical properties – Determination of Izod impact strength of rigid materials…
-
BS 2782-8 Method 820A:1992
Methods of testing plastics. Other properties – Determination of water vapour transmission rate (dish method)…
-
BS ISO 9772:1994:1995 Edition
Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame…
-
ISO 27126:2021
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals…
-
ISO/R 775:1969/Add 1:1974
Cylindrical and 1/10 conical shaft ends — Addendum 1: Checking of the depth of keyways…
-
BS 2782-6 Method 630A:1982
Methods of testing plastics. Dimensional properties – Determination of thickness by mechanical scanning of flexible…
-
BS 3444:1972
Specification for blockboard and laminboard Published By Publication Date Number of Pages BSI 1972 16
-
BS 2782-7 Method 730B:1978
Methods of testing plastics. Rheological properties – Determination of the viscosity of polymers in the…
-
BS 2782-10:Method 1002:1977
Methods of testing plastics. Glass reinforced plastics – Determination of loss on ignition Published By…
-
BS 4675-1:1976
Mechanical vibration in rotating machinery – Basis for specifying evaluation standards for rotating machines with…
-
BS 2782-1 Method 121A and 121B:1991:1992 Edition
Methods of testing plastics. Thermal properties – Determination of temperature of deflection of plastics under…
-
ISO 2773-2:1973
Conditions d’essai des machines à percer verticales à colonne — Contrôle de la précision —…
-
BS 2782-5 Method 540A:1977
Methods of testing plastics. Optical and colour properties, weathering – Determination of resistance to change…
-
BS EN ISO 3219:1995
Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosity using…
-
BS EN ISO 4610:1997
Plastics. Vinyl chloride homopolymer and copolymer resins. Sieve analysis using air-jet sieve apparatus Published By…
-
BS 2782-3:Method 323C:1996:2007 Edition
Methods of testing plastics – Mechanical properties – Shear vibration. Non-resonance method Published By Publication…
-
BS EN ISO 527-1:1996:1994 Edition
Plastics. Determination of tensile properties – General principles Published By Publication Date Number of Pages…
-
BS EN ISO 308:1998
Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the…
-
BS EN ISO 120:1998:1978 Edition
Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method Published By…
-
BS ISO 9772:2001:2004 Edition
Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame…
-
BS EN ISO 2556:2001
Plastics. Determination of the gas transmission rate of films and thin sheets under atmospheric pressure.…
-
BS 4656-11:1974
Accuracy of machine tools and methods of test – Drilling machines, vertical floor mounted column…
-
BS 2782-7 Method 733A:1991
Methods of testing plastics. Rheological properties – Determination of viscosity number of polyamides Published By…