ISO 2861-2:1980
$12.35
Vacuum technology — Quick release couplings — Dimensions — Part 2: Screwed type
| Published By | Publication Date | Number of Pages |
| ISO | 1980-08 | 8 |
ISO 2861-2:1980 specifies the dimensions of quick-release couplings of the screwed type as used in vacuum technology, as well as those of the “O” rings and the insert which are associated with these tailpieces to ensure coupling tightness.
General information is also included which refers to the clamped quick-release coupling standardized internationally in ISO 2861-1, with which the screwed quick-release coupling specified in ISO 2861-2:1980 is compatible.
Related products
-
BS EN ISO 2871-2:1994
Surface active agents. Detergents. Determination of cationic-active matter content – Cationic-active matter of low molecular…
-
BS 6829-5.2:1989
Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulphates – Method for…
-
BS 6870-2.6:1987
Analysis of aluminium ores. Chemical methods – Method for determination of aluminium content: EDTA titrimetric…
-
BS 770-3:1989
Methods for chemical analysis of cheese – Determination of fat content (reference method) Published By…
-
BS EN 20286-1:1993:1990 Edition
ISO system of limits and fits – ISO system of limits and fits. Bases of…
-
BS 7224:1990
Specification for use of X.25 to provide the OSI connection-mode network service Published By Publication…
-
BS EN ISO 8261:2002
Milk and milk products. General guidance for the preparation of test samples, initial suspensions and…
-
BS 4559-9.1:1988
Methods for preparation of calibration gas mixtures. Comparison methods and methods for establishing traceability –…
-
BS 4285-1.2:1984
Microbiological examination for dairy purposes. Guide to general procedures – Diluents, media and apparatus and…
-
BS EN 20140-9:1994:1987 Edition
Acoustics. Measurement of sound insulation in buildings and of building elements – Laboratory measurement of…
-
AS 1654.2:1995
ISO system of limits and fits – Tables of standard tolerance grades and limit deviations…
-
BS 5598-11:1983
Methods of sampling and test for halogenated hydrocarbons – Determination of ‘inert’ gas content of…
-
BS EN ISO 2871-1:1994
High molecular mass cationic-active matter Published By Publication Date Number of Pages BSI 1994 10
-
BS EN 28601:1992:1989 Edition
Specification for representation of dates and times in information interchange Published By Publication Date Number…
-
BS 5861:1980:1981 Edition
Specification for rear-mounted power take-offs on agricultural tractors Published By Publication Date Number of Pages…
-
BS 7178:1989
Specification for construction and layout of pedals of self-propelled industrial trucks sit-down rider-controlled Published By…
-
BS 6200-6.2:1990
Sampling and analysis of iron, steel and other ferrous metals. Guidelines on atomic absorption spectrometric…
-
BS 4140-19:1986
Methods of test for aluminium oxide – Determination of boron content Published By Publication Date…
-
BS 6861-1:1987
Mechanical vibration. Balance quality requirements of rigid rotors – Method for determination of permissible residual…
-
BS 2861:1984
Methods for presentation of a weave diagram and plans for drafting, denting and lifting Published…
-
BS 7164-28-28.1:1990
Chemical tests for raw and vulcanized rubber. Methods for determination of copper content – Atomic…
-
BS ISO 1940-1:2003:2005 Edition
Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) state – Specification and…
-
BS 6112:1983:1992 Edition
Recommendations for minimum access dimensions for earth-moving machinery Published By Publication Date Number of Pages…
-
ISO 898-6:1994
Mechanical properties of fasteners — Part 6: Nuts with specified proof load values — Fine…
-
BS 1673-2:1967
Methods of test for raw rubber and unvulcanized compounded rubber – Chemical analysis of raw…
-
BS 3643-1:1981
ISO metric screw threads – Principles and basic data Published By Publication Date Number of…
-
BS 6870-2.8:1987
Analysis of aluminium ores. Chemical methods – Method for determination of phosphorus content: spectrophotometric method…
-
BS 5688-29:1986
Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium…
-
ASHRAE Fundamentals Handbook IP 2013
2013 ASHRAE Handbook – Fundamentals – IP Edition Published By Publication Date Number of Pages…
-
BS EN ISO 4521:2008
Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification…
-
BS EN ISO 7083:2021 – TC
Tracked Changes. Technical product documentation. Symbols used in technical product documentation. Proportions and dimensions Published…
-
BS 3900-B4:1986
Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint…
-
BSI DD 114-2:1986
Computer graphics: Graphical Kernel System (GKS) language bindings. – Pascal (ISO/DIS 8651/2) Published By Publication…
-
BS EN 28631:1993:1990 Edition
Information technology. Program constructs and conventions for their representation Published By Publication Date Number of…
-
BS 3762-3-3.4:1991:1992 Edition
Analysis of formulated detergents – Quantitative test methods. – Method for determination of lower molecular…
-
BS 3531-17:1985
Surgical implants – Recommendations for the care and handling of orthopaedic surgical implants Published By…
-
ASCE 9780784476352 2012
Earthquakes and Engineers – An International History Published By Publication Date Number of Pages ASCE…
-
BS 3762-3-3.2:1983
Analysis of formulated detergents. Quantitative test methods – Method for determination of hydrolyzable and non-hydrolyzable…
-
BS 6828-8-8.2:1987
Dental rotary instruments. Cutters – Specification for carbide laboratory cutters Published By Publication Date Number…
-
BS 770-9:1985
Methods for chemical analysis of cheese – Determination of nitrate and nitrite contents. Cadmium reduction…
