ISO 29802:2009
$27.95
All terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degrees tapered rims — Designation, dimension, marking and load ratings
| Published By | Publication Date | Number of Pages |
| ISO | 2009-11 | 18 |
ISO 29802:2009 specifies the designations, dimensions, markings and load ratings of pneumatic tyres primarily intended for all terrain vehicles (ATV). It also specifies the designation, marking and contours of rims.
The tyres are based on the following parameters:
- speeds not exceeding 130 km/h (speed symbol M);
- fitted to (AT) 5° tapered drop centre rims;
- nominal rim diameter codes of 7 to 14 inclusive.
Related products
-
ISO 29804:2009
Thermal insulation products for building applications — Determination of the tensile bond strength of the…
-
BS ISO 29802:2009 2010
All terrain (AT) tyres and rims. Symbol marked pneumatic tyres on 5 degrees tapered rims.…
-
ISO 29862:2007
Self adhesive tapes — Determination of peel adhesion properties Published By Publication Date Number of…
-
BS ISO 29802:2017
All-terrain (AT) tyres and rims. Symbol marked pneumatic tyres on 5° tapered rims. Designation, dimension,…
-
BS ISO 2471:1998
Paper and board. Determination of opacity (paper backing). Diffuse reflectance method Published By Publication Date…
-
ISO 24802-1:2007
Recreational diving services — Safety related minimum requirements for the training of scuba instructors —…
-
BS EN ISO 29822:2014
Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols Published…
-
BS EN 1939:2003
Self adhesive tapes. Determination of peel adhesion properties Published By Publication Date Number of Pages…
-
BS EN ISO 29822:2014
Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols Published…
-
AS/NZS ISO 13666:2020
Ophthalmic optics – Spectacle lenses – Vocabulary Published By Publication Date Number of Pages AS…
-
BS 4443-1:1988:2000 Edition
Methods of test for flexible cellular materials – Method 4. Measurement of cell count Published…
-
ISO/TS 29002-31:2009
Industrial automation systems and integration — Exchange of characteristic data — Part 31: Query for…
-
BS EN ISO 29862:2019
Self adhesive tapes. Determination of peel adhesion properties Published By Publication Date Number of Pages…
-
ISO/TS 29002-4:2009
Industrial automation systems and integration — Exchange of characteristic data — Part 4: Basic entities…
-
BS ISO 2982-2:2013
Rolling bearings. Accessories – Dimensions for locknuts and locking devices Published By Publication Date Number…
-
BS EN ISO 29822:2014
Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols Published…
-
DIN ISO 28902-1:2012 Edition
Air quality – Environmental meteorology – Part 1: Ground-based remote sensing of visual range by…
-
BSI DD ENV 10247:1998:2001 Edition
Micrographic examination of the nonmetallic inclusion content of steels using standard pictures Published By Publication…
-
BS ISO 9802:1996:2006 Edition
Raw optical glass. Vocabulary Published By Publication Date Number of Pages BSI 2006 66
-
BS EN ISO 24802-2:2014
Recreational diving services. Requirements for the training of scuba instructors – Level 2 Published By…
-
ISO/TS 29002-10:2009
Industrial automation systems and integration — Exchange of characteristic data — Part 10: Characteristic data…
-
ISO/TS 29002-5:2009
Industrial automation systems and integration — Exchange of characteristic data — Part 5: Identification scheme…
-
BS ISO 2982-2:2001
Rolling bearings. Accessories – Locknuts and locking devices. Dimensions Published By Publication Date Number of…
-
BS EN ISO 21802:2021
Assistive products. Guidelines on cognitive accessibility. Daily time management Published By Publication Date Number of…
-
BS EN ISO 15875-3:2003+A2:2021:2022 Edition
Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) – Fittings Published…
-
BS ISO 12647-2:2004:2007 Edition
Graphic technology. Process control for the production of half-tone colour separations, proof and production prints…
-
BS EN ISO 6802:2008
Rubber and plastics hoses and hose assemblies with wire reinforcements. Hydraulic impulse test with flexing…
-
BS EN ISO 21802:2021
Assistive products. Guidelines on cognitive accessibility. Daily time management Published By Publication Date Number of…
-
BS ISO 29862:2018
Self adhesive tapes. Determination of peel adhesion properties Published By Publication Date Number of Pages…
-
BS ISO 11357-6:2002
Plastics. Differential scanning calorimetry (DSC) – Determination of oxidation induction time Published By Publication Date…
-
JIS Z 0237:2009
Testing methods of pressure-sensitive adhesive tapes and sheets Published By Publication Date Number of Pages…
-
ISO 21802:2019
Produits d’assistance — Lignes directrices relatives à l’accessibilité cognitive — Gestion du temps quotidien Published…
-
ISO 29822:2009
Vegetable fats and oils — Isomeric diacylglycerols — Determination of relative amounts of 1,2- and…
-
ISO 29805:2009
Thermal insulation products for building applications — Determination of the mechanical properties of glass fibre…
-
BS EN ISO 389-7:1998
Acoustics. Reference zero for the calibration of audiometric equipment – Reference threshold of hearing under…
-
BS ISO 16612-1:2005:2006 Edition
Graphic techology. Variable printing data exchange – Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005) Published…
-
BS ISO 16869:2008
Plastics. Assessment of the effectiveness of fungistatic compounds in plastics formulations Published By Publication Date…
-
ISO 24802-2:2007
Recreational diving services — Safety related minimum requirements for the training of scuba instructors —…
-
BS EN ISO 24802-1:2014
Recreational diving services. Requirements for the training of scuba instructors – Level 1 Published By…
-
BS ISO 2982-2:1995:1996 Edition
Rolling bearings. Accessories – Locknuts and locking devices. Dimensions Published By Publication Date Number of…
