ISO 29802:2017
$27.95
All-terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degree tapered rims — Designation, dimension, marking and load ratings
| Published By | Publication Date | Number of Pages |
| ISO | 2017-06 | 24 |
ISO 29802:2017 specifies the designations, dimensions, markings and load ratings of pneumatic tyres primarily intended for all-terrain vehicles (ATV). It also specifies the designation, marking and contours of rims.
The tyres meet the following parameters:
a) speeds not exceeding 130 km/h (Speed Symbol M);
b) fitted to (AT) 5° tapered drop centre rims;
c) nominal rim diameter codes of 7 to 14 inclusive.
Related products
-
BS EN ISO 28802:2012
Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving…
-
BS ISO 29862:2018
Self adhesive tapes. Determination of peel adhesion properties Published By Publication Date Number of Pages…
-
ISO 29803:2010
Thermal insulation products for building applications — Determination of the resistance to impact of external…
-
BS EN ISO 29862:2019
Self adhesive tapes. Determination of peel adhesion properties Published By Publication Date Number of Pages…
-
BS ISO 28902-2:2017
Air quality. Environmental meteorology – Ground-based remote sensing of wind by heterodyne pulsed Doppler lidar…
-
ISO 24802-2:2007
Recreational diving services — Safety related minimum requirements for the training of scuba instructors —…
-
ISO 28902-3:2018
Air quality — Environmental meteorology — Part 3: Ground-based remote sensing of wind by continuous-wave…
-
BS ISO 29802:2017
All-terrain (AT) tyres and rims. Symbol marked pneumatic tyres on 5° tapered rims. Designation, dimension,…
-
ISO/TS 29002-20:2010
Industrial automation systems and integration — Exchange of characteristic data — Part 20: Concept dictionary…
-
BS EN ISO 29822:2014
Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols Published…
-
ISO 2982-1:2013
Roulements — Accessoires — Partie 1: Dimensions des manchons de serrage et de démontage Published…
-
ISO 28902-1:2012
Qualité de l’air — Météorologie de l’environnement — Partie 1: Télédétection de la portée visuelle…
-
ISO 24802-1:2014
Services relatifs à la plongée de loisirs — Exigences concernant la formation des moniteurs de…
-
ISO 28902-2:2017
Air quality — Environmental meteorology — Part 2: Ground-based remote sensing of wind by heterodyne…
-
ISO 24802-2:2014
Recreational diving services — Requirements for the training of scuba instructors — Part 2: Level…
-
BS ISO 28902-3:2018
Air quality. Environmental meteorology – Ground-based remote sensing of wind by continuous-wave Doppler lidar Published…
-
BS ISO 29842:2011+A1:2015
Sensory analysis. Methodology. Balanced incomplete block designs Published By Publication Date Number of Pages BSI…
-
ISO 21802:2019
Produits d’assistance — Lignes directrices relatives à l’accessibilité cognitive — Gestion du temps quotidien Published…
-
ISO 29842:2011
Sensory analysis — Methodology — Balanced incomplete block designs Published By Publication Date Number of…
-
ISO 29862:2018
Self adhesive tapes — Determination of peel adhesion properties Published By Publication Date Number of…
-
BS ISO 2902:2016
ISO metric trapezoidal screw threads. General plan Published By Publication Date Number of Pages BSI…
-
ISO 28802:2012
Ergonomics of the physical environment — Assessment of environments by means of an environmental survey…
-
ISO/IEC 29102:2011
Information technology — Office equipment — Method for the determination of ink cartridge photo yield…
-
BS EN ISO 29822:2014
Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols Published…
-
UNE-EN ISO 28802:2012
Ergonomics of the physical environment – Assessment of environments by means of an environmental survey…
-
ISO 26802:2010
Nuclear facilities — Criteria for the design and the operation of containment and ventilation systems…
-
BS ISO/IEC 20802-2:2016:2017 Edition
Information technology. Open data protocol (OData) v4.0 – OData JSON Format Published By Publication Date…
-
ISO/IEC 29102:2015
Information technology — Office equipment — Method for the determination of ink cartridge photo yield…
-
ISO 24802-1:2007
Recreational diving services — Safety related minimum requirements for the training of scuba instructors —…
-
BS ISO 29802:2009 2010
All terrain (AT) tyres and rims. Symbol marked pneumatic tyres on 5 degrees tapered rims.…
-
ISO 2982-2:2013
Roulements — Accessoires — Partie 2: Dimensions des écrous à encoches et dispositifs de blocage…
-
ISO/TS 29002-6:2010
Industrial automation systems and integration — Exchange of characteristic data — Part 6: Concept dictionary…
-
ISO 29862:2007
Self adhesive tapes — Determination of peel adhesion properties Published By Publication Date Number of…
-
BS EN ISO 29822:2014
Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols Published…
-
BS ISO 2902:2016:2020 Edition
ISO metric trapezoidal screw threads. General plan Published By Publication Date Number of Pages BSI…
-
BS ISO/IEC 29102:2015
Information technology. Office equipment. Method for the determination of ink cartridge photo yield for colour…
-
ISO 29842:2011/Amd 1:2015
Sensory analysis — Methodology — Balanced incomplete block designs — Amendment 1 Published By Publication…
-
ISO 2902:2016
ISO metric trapezoidal screw threads — General plan Published By Publication Date Number of Pages…
-
BS ISO 2982-1:2013
Rolling bearings. Accessories – Dimensions for adapter sleeve assemblies and withdrawal sleeves Published By Publication…
-
BS ISO/IEC 29102:2011
Information technology. Office equipment. Method for the determination of ink cartridge photo yield for colour…
