ISO 3993:1984
$13.00
Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method
| Published By | Publication Date | Number of Pages |
| ISO | 1984-08 | 8 |
The prescribed apparatus shall not be used for materials having gauge vapour pressures higher than 1,4 MPa (absolute vapour pressure 1,5 MPa) at the test temperature. Alternative calibration procedures are described, but only the one using a certified hydrometer is suitable for the determination of density to be used in calculations of qualities for custody transfer or fiscal purposes.
Related products
-
BS EN 23923-2:1993
Metallic powders. Determination of apparent density – Scott volumeter method Published By Publication Date Number…
-
ISO 393-4:1986
Asbestos-cement products — Part 4: Trapezoidal section sheets for roofing and cladding Published By Publication…
-
BS 308-2:1985
Engineering drawing practice – Recommendations for dimensioning and tolerancing of size Published By Publication Date…
-
ISO 8984-2:1993
Moteurs diesels — Essais des porte-injecteurs de combustible complets — Partie 2: Méthodes d’essai Published…
-
BS 5600-2-2.3:1988
Powder metallurgical materials and products. Methods of sampling and testing metallic powders – Determination of…
-
BS 5600-2-2.5:1988
Powder metallurgical materials and products. Methods of sampling and testing metallic powders – Determination of…
-
ISO/TR 9993:1989
Plain bearings — Testing of the tribological behaviour of bearing materials for oil lubrication application…
-
BS EN 30993-1:1994
Biological evaluation of medical devices – Guidance on selection of tests Published By Publication Date…
-
BS EN 23953:1993
Metallic powders. Determination of tap density Published By Publication Date Number of Pages BSI 1993…
-
IEEE 896.5a 1995
IEEE Standard for Futurebus+(R), Profile M (Military): Errata, Corrections, and Clarifications Published By Publication Date…
-
ISO 2993:1974
Ammonium sulphate for industrial use — Determination of free acidity — Titrimetric method Published By…
-
CAN/CSA-ISO/IEC 8208-02:2002 Edition
Information Technology – Data Communications – X.25 Packet Layer Protocol for Data Terminal Equipment Published…
-
API TR 2A-LFS-2020
Effect of Best-estimate Geotechnical p-y Curves on Performance of Offshore Structures Published By Publication Date…
-
CAN/CSA-Z5360-08:2008 Edition
Anesthetic vaporizers – Agent-specific filling systems Published By Publication Date Number of Pages CSA 2008-08-01…
-
JIS K 2240:2013
Liquefied Petroleum Gases Published By Publication Date Number of Pages JIS 2013-03-21 125
-
IEEE 896.5a-1994
IEEE Standard for Futurebus+(R), Profile M (Military): Errata, Corrections, and Clarifications Published By Publication Date…
-
ISO 8984-1:1993
Diesel engines — Testing of fuel injectors — Part 1: Hand-lever-operated testing and setting apparatus…
-
ISO 393-2:1986
Asbestos-cement products — Part 2: Asbestos-cement-cellulose corrugated sheets and fittings for roofing and cladding Published…
-
AS/NZS 4222.1:1994
Information technology – Open Systems Interconnection – Conformance test suite for the presentation layer –…
-
BS IEC 61892-5:2000:2001 Edition
Mobile and fixed offshore units. Electrical installations – Mobile units Published By Publication Date Number…
-
BS 6665:1985
Method for determination of density or relative density of liquefied petroleum gases and other light…
-
BS EN ISO 3993:1996
Liquefied petroleum gas and light hydrocarbons. Determination of density or relative density. Pressure hydrometer method…
-
IEEE 896.4a 1996
IEEE Standard for Conformance Test Requirements for Futurebus+(R) – Errata, Corrections and Clarifications Published By…
-
ISO/IEC TR 9789:1994
Information technology — Guidelines for the organization and representation of data elements for data interchange…
-
ISO 393-3:1984
Asbestos-cement products — Part 3: Asymmetrical section corrugated sheets and fittings for roofing and cladding…
-
ISO 3923-2:1981
Metallic powders — Determination of apparent density — Part 2: Scott volumeter method Published By…
-
ISO 3593:1981
Starch — Determination of ash Published By Publication Date Number of Pages ISO 1981-10 4
-
JIS L 1091:1999
Testing Methods for Flammability of Textiles Published By Publication Date Number of Pages JIS 1999-04-20…
-
BS 5775-10:1982:1989 Edition
Specification for quantities, units and symbols – Nuclear reactions and ionizing radiations Published By Publication…
-
BS EN 23995:1993
Specification for metallic powders. Determination of green strength by transverse rupture of rectangular compacts Published…
-
IEEE 896.4a-1995
IEEE Standard for Conformance Test Requirements for Futurebus+(R) – Errata, Corrections and Clarifications Published By…
-
BS 7128:1989
Specification for colour coding of hypodermic needles for single use Published By Publication Date Number…
-
ISO/IEC 8882-2:2000
Information technology — Telecommunications and information exchange between systems — X.25 DTE conformance testing —…
-
ISO 3995:1985
Metallic powders — Determination of green strength by transverse rupture of rectangular compacts Published By…
-
BS EN 20534:1993:1989 Edition
Method for determination of thickness and apparent bulk density or apparent sheet density of paper…
-
ISO 393-1:1983
Asbestos-cement products — Part 1: Corrugated sheets and fittings for roofing and cladding Published By…
-
CAN/CSA-Z349.40-93:1993 Edition
Dental Base Metal Casting Alloys Published By Publication Date Number of Pages CSA 1993-03-01 31
-
BS EN ISO 7083:2021 – TC
Tracked Changes. Technical product documentation. Symbols used in technical product documentation. Proportions and dimensions Published…
-
BS 308-3:1990
Engineering drawing practice – Recommendations for geometrical tolerancing Published By Publication Date Number of Pages…
-
ISO 3913:1977/Add 1:1980
Shipbuilding — Welded steel bollards — Addendum 1: Double bollards for inland navigation Published By…
