ISO 4392-2:2002
$27.95
Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability
Published By | Publication Date | Number of Pages |
ISO | 2002-02 | 22 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This part of ISO 4392 specifies two test methods for determining the startability of rotary hydraulic motors. It describes two comparable methods of measurement, namely the constant torque method and the constant pressure method. Since the results obtained by these two methods are equivalent, no preference is given to either.
Published Code | ISO |
---|---|
Published By | International Organization for Standardization |
Publication Date | 2002-02 |
Pages Count | 22 |
Language | France |
Edition | 3 |
File Size | 215.0 KB |
ICS Codes | 23.100.10 - Pumps and motors |
Related products
-
BS EN ISO 4892-2:2000 2006
Plastics. Methods of exposure to laboratory light sources – Xenon-arc sources Published By Publication Date…
-
BS 4592-3:2006
Industrial type flooring and stair treads – Cold formed metal planks. Specification Published By Publication…
-
IEEE 1003.1, 2004 Edition
IEEE Standard for Information Technology – Portable Operating System Interface (POSIX(TM)) – Base Definitions Published…
-
BS EN ISO 14122-1:2001+A1:2010
Safety of machinery. Permanent means of access to machinery – Choice of a fixed means…
-
BSI PD 6699-2:2007
Nanotechnologies – Guide to safe handling and disposal of manufactured nanomaterials Published By Publication Date…
-
BS 4592-1:1995:2003 Edition
Industrial type flooring, walkways and stair treads – Specification for open bar gratings Published By…
-
ISO 4392-1:2002
Transmissions hydrauliques — Détermination des caractéristiques des moteurs — Partie 1: Essai à pression constante…
-
AS 2699.1:2020
Built-in components for masonry construction – Wall ties Published By Publication Date Number of Pages…
-
BS EN ISO 4892-3:2000 1995
Plastics. Methods of exposure to laboratory light sources – Fluorescent UV lamps Published By Publication…
-
BS EN ISO 11554:2006
Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and…
-
BSI 22/30448636 DC 2022
BS ENISO/IEC 4396-4. Telecommunications and information exchange between systems. Future network recursive inter-network architecture and…
-
BSI 21/30425937 DC:2020 Edition
BS EN ISO 4892-2 AMD1. Plastics. Methods of exposure to laboratory light sources – Part…
-
BS EN ISO 8973:1999+A1:2020
Liquefied petroleum gases. Calculation method for density and vapour pressure Published By Publication Date Number…
-
BS 4592-4:1992:2003 Edition
Industrial type flooring, walkways and stair treads – Specification for glass reinforced plastics open bar…
-
ISO 4992-2:2006
Steel castings — Ultrasonic examination — Part 2: Steel castings for highly stressed components Published…
-
BS 4592-2:2006
Industrial type flooring and stair treads – Expanded metal gratings. Specification Published By Publication Date…
-
BS EN ISO 14122-4:2004+A1:2010
Safety of machinery. Permanent means of access to machinery – Fixed ladders Published By Publication…
-
BS EN ISO 14122-3:2001+A1:2010
Safety of machinery. Permanent means of access to machinery – Stairways, stepladders and guard-rails Published…
-
BS 4592-5:2006
Industrial type flooring and stair treads – Solid plates in metal and glass reinforced plastics…
-
BSI 20/30421403 DC:2020 Edition
BS ISO 4382-2. Plain bearings. Copper alloys – Part 2. Wrought copper alloys for solid…
-
BS EN ISO 4892-2:2013+A1:2021
Plastics. Methods of exposure to laboratory light sources – Xenon-arc lamps Published By Publication Date…
-
BS ISO 4992-1:2006:2008 Edition
Steel castings. Ultrasonic examination – Steel castings for general purposes Published By Publication Date Number…
-
BS EN ISO 15877-2:2003:2004 Edition
Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) – Pipes…
-
BS EN ISO 4892-2:2006+A1:2009:2010 Edition
Plastics. Methods of exposure to laboratory light sources – Xenon-arc lamps Published By Publication Date…
-
BS 4592-5:1995:2003 Edition
Industrial type flooring, walkways and stair treads – Specification for solid plates in steel, aluminium…
-
BS ISO 4992-1:2020
Steel castings. Ultrasonic testing – Steel castings for general purposes Published By Publication Date Number…
-
BS EN ISO 4892-3:2006
Plastics. Methods of exposure to laboratory light sources – Fluorescent UV lamps Published By Publication…
-
ISO 4992-2:2020
Steel castings — Ultrasonic testing — Part 2: Steel castings for highly stressed components Published…
-
BS EN ISO 14122-2:2001+A1:2010
Safety of machinery. Permanent means of access to machinery – Working platforms and walkways Published…
-
BS 4592-3:1987:2003 Edition
Industrial type flooring, walkways and stair treads – Specification for cold formed planks Published By…
-
BS EN ISO 1628-3:2003:2004 Edition
Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers – Polyethylenes…
-
BS EN ISO 4892-2:2013
Plastics. Methods of exposure to laboratory light sources – Xenon-arc lamps Published By Publication Date…
-
BS 5395-3:1985:2003 Edition
Stairs, ladders and walkways – Code of practice for the design of industrial type stairs,…
-
BS ISO 4992-2:2020
Steel castings. Ultrasonic testing – Steel castings for highly stressed components Published By Publication Date…
-
BS ISO 4992-2:2006
Steel castings. Ultrasonic examination – Steel castings for highly stressed components Published By Publication Date…
-
BS 4592-6:2008
Industrial type flooring and stair treads – Glass reinforced plastics (GRP) moulded open mesh gratings…
-
BS EN ISO 439:2020
Steel and cast iron. Determination of silicon content. Gravimetric method Published By Publication Date Number…
-
BS 4592-2:1987:2003 Edition
Industrial type flooring, walkways and stair treads – Specification for expanded metal grating panels Published…
-
BS EN ISO 10366-2:2003:2004 Edition
Plastics. Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials – Preparation of test specimens and determination…
-
ISO/IEC 10179:1996/Amd 2:2005
Information technology — Processing languages — Document Style Semantics and Specification Language (DSSSL) — Amendment…