ISO 5374:1978
$12.35
Condensed phosphates for industrial use (including foodstuffs) — Determination of chloride content — Potentiometric method
| Published By | Publication Date | Number of Pages |
| ISO | 1978-12 | 6 |
Applicable to products having contents expressed in chlorine equal to or more than 30 mg/kg. Potentiometric titration of the chloride ions with standard volumetric silver nitrate solution in a nitric acid-acetone-water medium, at a temperature below 20 0C, using a silver measurement electrode and a colomel reference electrode or a pair of silver-mercury(I) sulphate electrodes. Has also been approved by the IUPAC.
Related products
-
BS 6153:1987
Specification for oropharyngeal airways Published By Publication Date Number of Pages BSI 1987 8
-
BS EN 20534:1993:1989 Edition
Method for determination of thickness and apparent bulk density or apparent sheet density of paper…
-
BS 4427-15:1982
Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial…
-
BS EN ISO 5364:2011
Anaesthetic and respiratory equipment. Oropharyngeal airways Published By Publication Date Number of Pages BSI 2011…
-
ASHRAE Fundamentals Handbook IP 2013
2013 ASHRAE Handbook – Fundamentals – IP Edition Published By Publication Date Number of Pages…
-
BS 4267-1:1988
Ammonium nitrate – Method for determination of ammoniacal nitrogen content Published By Publication Date Number…
-
BS 4427-12:1979
Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial…
-
BS 5375:1976
Methods of test for raw general purpose chloroprene rubbers Published By Publication Date Number of…
-
IEEE 1003.1-2017(Redline)
IEEE Standard for Information Technology–Portable Operating System Interface (POSIX(TM)) Base Specifications, Issue 7 (Redline) Published…
-
BS 4427-14:1989
Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial…
-
BS ISO 1361:1997:1998 Edition
Light-gauge metal containers. Round open-top cans. Internal diameters Published By Publication Date Number of Pages…
-
BS 5379:1976
Determination of the sulphur content of petroleum products by the Wickbold combustion method Published By…
-
BS 3417-2:1984
Power take-off shafts and guards for tractors and machinery for agriculture and forestry – Methods…
-
BS 3370:1970
Specification for wrought magnesium alloys for general engineering purposes. Plate, sheet and strip Published By…
-
BS 2547-7:1979
Specification for basic dimensions of cones and tubes for winding textile yarns – Perforated cylindrical…
-
BS EN 24260:1994
Methods of test for petroleum and its products. Petroleum products and hydrocarbons. Determination of sulfur…
-
BS 903-2:1997
Physical testing of rubber – Guide to the application of statistics to rubber testing Published…
-
ISO 5375:1979
Condensed phosphates for industrial use (including foodstuffs) — Determination of oxides of nitrogen content —…
-
ISO 15374:1998
Implants for surgery — Requirements for production of forgings Published By Publication Date Number of…
-
BS 2494:1990
Specification for elastomeric seals for joints in pipework and pipelines Published By Publication Date Number…
-
ISO 5274:1979
Aromatic hydrocarbons — Acid-wash test Published By Publication Date Number of Pages ISO 1979-07 4
-
BS EN ISO 12401:2009
Small craft. Deck safety harness and safety line. Safety requirements and test methods Published By…
-
BS 5240-1:1987
Industrial safety helmets – Specification for construction and performance Published By Publication Date Number of…
-
BS AU 218:1987:1988 Edition
Specification for automotive synchronous belt drives Published By Publication Date Number of Pages BSI 1988…
-
BS 5377-1:1988
Assessment of laundering effects by means of a cotton control cloth – Specification for preparation…
-
BS 3146-2:1975
Specification for investment castings in metal – Corrosion and heat resisting steels, nickel and cobalt…
-
IEEE 1003.1-2017
IEEE Standard for Information Technology–Portable Operating System Interface (POSIX(TM)) Base Specifications, Issue 7 (Superseded Redline)…
-
ISO 4997:2007
Cold-reduced carbon steel sheet of structural quality Published By Publication Date Number of Pages ISO…
-
BS EN ISO 10140-4:2010:2011 Edition
Acoustics. Laboratory measurement of sound insulation of building elements – Measurement procedures and requirements Published…
-
BS 5774:1984
Specification for internal diameters of round hermetically sealed metal cans for food and non-carbonated drinks…
-
BS 7254-6-6.1:1990
Orthopaedic implants. Forgings – Specification for production of forgings Published By Publication Date Number of…
-
ISO 5372:1978
Condensed phosphates for industrial use (including foodstuffs) — Determination of arsenic content — Silver diethyldithiocarbamate…
-
BS EN 23166:1994
Codes for the representation of names of countries Published By Publication Date Number of Pages…
-
BS 5374:1989
Specification for codes for the representation of names of countries Published By Publication Date Number…
-
ISO 5334:1978
Solid wood parquet — Classification of maritime pine strips Published By Publication Date Number of…
-
BS 5375:1992
Method for evaluation of general purpose chloroprene rubber (CR) Published By Publication Date Number of…
-
BS 5174:1975
Specification for the dimensions of film in rolls for phototypesetting and photolettering equipment Published By…
-
ISO 5378:1978
Amidons, fécules et produits dérivés — Dosage de l’azote selon la méthode de Kjeldahl —…
-
BS 4656-12:1979
Specification for the accuracy of machine tools and methods of test – Dividing heads Published…
-
BS ISO 3772:1991:1995 Edition
Photography. Film dimensions. Rolls for photocomposition Published By Publication Date Number of Pages BSI 1995…
