ISO 575:1978
$11.05
Textile machinery and accessories — Transfer cones — Half angle of the cone 4 degrees 20′
| Published By | Publication Date | Number of Pages |
| ISO | 1978-06 | 4 |
Specifies the dimensions and tolerances of the cited transfer cones, which, after the cones for dyeing purposes have been removed from the dyed or bleached wound packages, are put in the packages for the purpose of re-processing. These transfer cones shall not be used for winding purposes. Also specified are the dimensions and tolerances of the gauges for checking these cones. – Replaces ISO Recommendation R 575-1967 and constitutes its technical revision.
Related products
-
BS ISO 5725-5:1998:2009 Edition
Accuracy (trueness and precision) of measurement methods and results – Alternative methods for the determination…
-
ISO 578:1987
Tapered roller bearings — Inch series — Tolerances Published By Publication Date Number of Pages…
-
BS 135; 458; 805:1977:1978 Edition
Specifications for benzene, xylenes and toluenes Published By Publication Date Number of Pages BSI 1978…
-
ISO 5755-3:1987
Sintered metal materials — Specifications — Part 3: Sintered alloyed and sintered stainless steels used…
-
ISO 5755-1:1987
Sintered metal materials — Specifications — Part 1: Materials, for bearings, impregnated with liquid lubricant…
-
ISO 8891:1998
Dental casting alloys with noble metal content of at least 25 % but less than…
-
BS 5705-2:1979
Methods of test for sodium hexafluorosilicate for industrial use – Determination of phosphate content Published…
-
ISO 515:1973
Photography — Stereo systems using 35 mm objectives on 35 mm film, five-perforation format —…
-
BS 2547-7:1979
Specification for basic dimensions of cones and tubes for winding textile yarns – Perforated cylindrical…
-
BS 5775-4:1979
Specification for quantities, units and symbols – Heat Published By Publication Date Number of Pages…
-
ISO 576:1976
Textile machinery and accessories — Paper patterns for dobbies — Dimensions Published By Publication Date…
-
ISO 5725-5:1998
Exactitude (justesse et fidélité) des résultats et méthodes de mesure — Partie 5: Méthodes alternatives…
-
BS 5750-1:1987:1988 Edition
Quality systems – Specification for design/development, production, installation and servicing Published By Publication Date Number…
-
BS 3182-5:1978
Textile machinery and accessories: healds, heald frames and reeds – Specification for metal reeds with…
-
BS 2547-6:1978
Specification for basic dimensions of cones and tubes for winding textile yarns – Transfer cones.…
-
BS 5750-0-0.1:1987:1988 Edition
Quality systems. Principal concepts and applications – Guide to selection and use Published By Publication…
-
ISO 5795-1:1988
Rubber compounding ingredients — Kaolin clay — Part 1: Methods of test (excluding tests in…
-
ISO 5755-2:1987
Sintered metal materials — Specifications — Part 2: Sintered iron and sintered steel containing one…
-
ISO 573:1976
Textile machinery and accessories — Dobby lags and pegs in wood, metal or other suitable…
-
BS 5750-3:1987:1988 Edition
Quality systems – Specification for final inspection and test Published By Publication Date Number of…
-
ISO 1575:1987
Tea — Determination of total ash Published By Publication Date Number of Pages ISO 1987-10…
-
ISO 5175:1987
Equipment used in gas welding, cutting and allied processes — Safety devices for fuel gases…
-
ISO 8571-2:1988
Information processing systems — Open Systems Interconnection — File Transfer, Access and Management — Part…
-
BS 525:1991
Specification for fibre cores for wire ropes Published By Publication Date Number of Pages BSI…
-
ISO 595-2:1987
Reusable all-glass or metal-and-glass syringes for medical use — Part 2: Design, performance requirements and…
-
BS 5750-0-0.2:1987:1988 Edition
Quality systems. Principal concepts and applications – Guide to quality management and quality system elements…
-
ISO/R 775:1969/Add 1:1974
Cylindrical and 1/10 conical shaft ends — Addendum 1: Checking of the depth of keyways…
-
BS 5752-1:1979
Methods of test for coffee and coffee products – Green coffee. Determination of moisture content…
-
ISO 5754:1978
Sintered metal materials, excluding hardmetals — Unnotched impact test piece Published By Publication Date Number…
-
AS 3835.3(Int):1998
Coordination of power and telecommunications – Earth Potential Rise (EPR) – Isolation arrangements for paired…
-
BS AU 167:1978
Specification for road vehicles – low tension cable connections for ignition coils Published By Publication…
-
BS 5497-1:1987
Precision of test methods – Guide for the determination of repeatability and reproducibility for a…
-
BS 5705-4:1979
Methods of test for sodium hexafluorosilicate for industrial use – Determination of loss in mass…
-
AS/NZS 3823.1.3:2005 (R2016)
Performance of electrical appliances – Airconditioners and heat pumps – Water-source heat pumps – Water-to-air…
-
ISO/IEC 13818-6:1998
Information technology — Generic coding of moving pictures and associated audio information — Part 6:…
-
BS 5750-2:1987:1988 Edition
Quality systems – Specification for production and installation Published By Publication Date Number of Pages…
-
ISO 5785:1978
Hydrochloric acid for industrial use — Determination of arsenic content — Silver diethyldithiocarbamate photometric method…
-
AS 2788:2002
Pneumatic fluid power – General requirements for systems (ISO 4414:1998, MOD) Published By Publication Date…
-
AS 3905.15:1998
Quality system guidelines – Guide to AS/NZS ISO 9001:1994 for the accountancy profession Published By…
-
ISO 5375:1979
Condensed phosphates for industrial use (including foodstuffs) — Determination of oxides of nitrogen content —…