ISO 7759:2010
$19.50
Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
| Published By | Publication Date | Number of Pages |
| ISO | 2010-09 | 16 |
ISO 7759:2010 specifies a method for the measurement of the reflectance characteristics of high-gloss anodized aluminium surfaces.
The method described is also suitable for the measurement of the reflectance characteristics of other high-gloss metal surfaces.
The method is not suitable for diffuse-finish metal surfaces and does not measure colour.
Related products
-
ISO 4759-3:2016
Tolérances pour fixations — Partie 3: Rondelles pour vis et écrous — Grades A, C…
-
ISO 7739:2016
Cinematography — Two-track photographic analogue sound records on 16 mm motion-picture prints — Positions and…
-
ISO 7755-2:2013
Fraises-limes en métaux-durs — Partie 2: Fraises-limes cylindriques (forme A) Published By Publication Date Number…
-
ISO 3759:2011
Textiles — Préparation, marquage et mesurage des éprouvettes d’étoffe et des vêtements dans les essais…
-
ISO 8759-4:2018
Tracteurs agricoles — Équipement monté à l’avant — Partie 4: Attelage trois points Published By…
-
ISO 4759-3:2000
Tolerances for fasteners — Part 3: Plain washers for bolts, screws and nuts — Product…
-
ISO 7719:2012
Écrous hexagonaux normaux auto freinés tout métal — Classes de qualité 5, 8 et 10…
-
ISO 7755-9:2013
Hardmetal burrs — Part 9: 60 degrees and 90 degrees cone burrs (styles J and…
-
ISO 7859:2000
Mopeds — Fuel consumption measurements Published By Publication Date Number of Pages ISO 2000-05 28
-
ISO 7752-3:2013
Cranes — Control layout and characteristics — Part 3: Tower cranes Published By Publication Date…
-
ISO 7755-1:2013
Hardmetal burrs — Part 1: General specifications Published By Publication Date Number of Pages ISO…
-
ISO 7752-2:2011
Cranes — Control layout and characteristics — Part 2: Basic arrangement and requirements for mobile…
-
ISO 7779:2018
Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment Published By…
-
ISO 7755-6:2013
Hardmetal burrs — Part 6: Arch round- (ball-) nose burrs (style F) Published By Publication…
-
ISO 7752-1:2010
Cranes — Control layout and characteristics — Part 1: General principles Published By Publication Date…
-
BS ISO 7739:2016
Cinematography. Two-track photographic analogue sound records on 16 mm motion-picture prints. Positions and width dimensions…
-
BS EN ISO 7779:2010
Acoustics. Measurement of airborne noise emitted by information technology and telecommunications equipment Published By Publication…
-
BS ISO 9759:2000 2001
Fork ends, in corrosion-resistant steel, swaged on aircraft control wire rope. Dimensions and loads Published…
-
BS ISO 8759-3:2018
Agricultural tractors. Front-mounted equipment – Power take-off: General specifications and location Published By Publication Date…
-
ISO 7755-10:2013
Fraises-limes en métaux-durs — Partie 10: Fraises-limes coniques à bout rond (forme L) Published By…
-
ISO 2759:2001
Board — Determination of bursting strength Published By Publication Date Number of Pages ISO 2001-11…
-
ISO 7755-11:2013
Fraises-limes en métaux-durs — Partie 11: Fraises-limes coniques à bout pointu (forme M) Published By…
-
ISO 7752-3:2010
Cranes — Control layout and characteristics — Part 3: Tower cranes Published By Publication Date…
-
ISO 7755-4:2013
Hardmetal burrs — Part 4: Spherical burrs (style D) Published By Publication Date Number of…
-
ISO 7755-12:2013
Hardmetal burrs — Part 12: Inverted cone burrs (style N) Published By Publication Date Number…
-
ISO 4759-1:2000
Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A,…
-
ISO 7755-7:2013
Hardmetal burrs — Part 7: Arch pointed-nose burrs (style G) Published By Publication Date Number…
-
ISO 7779:2010
Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment Published By…
-
ISO 7751:2016
Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to…
-
ISO 9759:2000
Aéronautique et espace — Embouts à chape, en acier résistant à la corrosion, à sertir…
-
ISO 2759:2014
Carton — Détermination de la résistance à l’éclatement Published By Publication Date Number of Pages…
-
ISO 7755-8:2013
Hardmetal burrs — Part 8: Flame burrs (style H) Published By Publication Date Number of…
-
ISO 7755-3:2013
Fraises-limes en métaux-durs — Partie 3: Fraises-limes cylindriques à bout rond (forme C) Published By…
-
ISO 8759-3:2018
Tracteurs agricoles — Équipement monté à l’avant — Partie 3: Prise de force: Spécifications générales…
-
BS EN ISO 7751:2016
Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum…
-
BS ISO 7859:2000
Mopeds. Fuel consumption measurements Published By Publication Date Number of Pages BSI 2000 30
-
ISO 7752-1:2010/Amd 1:2012
Cranes — Control layout and characteristics — Part 1: General principles — Amendment 1 Published…
-
ISO 7755-5:2013
Hardmetal burrs — Part 5: Oval burrs (style E) Published By Publication Date Number of…
-
BS EN ISO 7759:2010
Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a…
-
ISO 8759-1:2018
Tracteurs agricoles — Équipement monté à l’avant — Partie 1: Prise de force: Exigences de…
