ISO 8772:2006
$36.40
Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)
Published By | Publication Date | Number of Pages |
ISO | 2006-09 | 28 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
ISO 8772:2006 specifies the requirements for polyethylene (PE) pipes, fittings and piping systems intended for use for non-pressure underground drainage and sewerage for the conveyance of soil and waste discharge of domestic and industrial origin, as well as surface water.
It covers buried pipework, as well as piping systems buried within the building structure.
In the case of industrial discharge, it is necessary that the chemical and temperature resistance be taken into account, but this will need to be done separately.
ISO 8772:2006 is applicable to PE pipes with or without an integral socket.
This International Standard is applicable to PE pipes and fittings for the following types of joints: elastomeric ring seal joints; butt fused joints; electrofusion joints; mechanical joints.
ISO 8772:2006 also specifies the test parameters for the test methods referred to therein.
Published Code | ISO |
---|---|
Published By | International Organization for Standardization |
Publication Date | 2006-09 |
Pages Count | 28 |
Language | France |
Edition | 2 |
File Size | 307.2 KB |
ICS Codes | 23.040.20 - Plastics pipes 23.040.45 - Plastics fittings 91.140.80 - Drainage systems 93.030 - External sewage systems |
Related products
-
ISO 877-2:2009
Plastiques — Méthodes d’exposition au rayonnement solaire — Partie 2: Exposition directe et exposition derrière…
-
ISO/TS 10303-1770:2008
Industrial automation systems and integration — Product data representation and exchange — Part 1770: Application…
-
ISO 8782-7:2000
Safety, protective and occupational footwear for professional use — Part 7: Additional specifications for protective…
-
BS ISO 3772:1991:1995 Edition
Photography. Film dimensions. Rolls for photocomposition Published By Publication Date Number of Pages BSI 1995…
-
BS ISO 9772:1994:1995 Edition
Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame…
-
ISO 877-1:2009
Plastics — Methods of exposure to solar radiation — Part 1: General guidance Published By…
-
JIS B 2808:2013
Spring Pins Published By Publication Date Number of Pages JIS 2013-01-21 26
-
ISO 8782-5:2000
Safety, protective and occupational footwear for professional use — Part 5: Additional requirements and test…
-
BS ISO 9244:2008+A1:2016
Earth-moving machinery. Machine safety labels. General principles Published By Publication Date Number of Pages BSI…
-
DIN EN ISO 877-2:2011 Edition
Kunststoffe – Freibewitterung – Teil 2: Bewitterung und Bestrahlen hinter Fensterglas Published By Publication Date…
-
ISO/TS 10303-1772:2008
Industrial automation systems and integration — Product data representation and exchange — Part 1772: Application…
-
BS EN ISO 772:2001:2006 Edition
Hydrometric determinations. Vocabulary and symbols Published By Publication Date Number of Pages BSI 2006 160
-
ISO 8773:2006
Systèmes de canalisations en plastique pour les branchements et les collecteurs d’assainissement enterrés sans pression…
-
BSI 16/30344242 DC:2016 Edition
BS EN ISO 877-1. Plastics. Methods of exposure to solar radiation. Part 1. General guidance…
-
BS EN ISO 18772:2014
Soil quality. Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils and…
-
BS EN 1772:2000
Surface active agents. Determination of wetting power by immersion Published By Publication Date Number of…
-
DIN EN ISO 18772:2014 Edition
Soil quality – Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils…
-
BS EN ISO 8752:1998
Spring-type straight pins. Slotted, heavy duty Published By Publication Date Number of Pages BSI 1998…
-
BS EN ISO 8872:2022
Aluminium caps and aluminium/ plastic caps for infusion bottles and injection vials. General requirements and…
-
ISO 877-3:2009
Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated…
-
ISO 8782-6:2000
Safety, protective and occupational footwear for professional use — Part 6: Additional specifications for safety…
-
BS ISO 9772:2012
Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame…
-
BS EN ISO 8752:2009
Spring-type straight pins. Slotted, heavy duty Published By Publication Date Number of Pages BSI 2009…
-
AS/NZS 2210.7:2001
Occupational protective footwear – Additional specifications for safety footwear Published By Publication Date Number of…
-
ISO 8752:2009
Spring-type straight pins — Slotted, heavy duty Published By Publication Date Number of Pages ISO…
-
BS ISO 3772:2000 2001
Photography. Rolls of sensitized material for the pre-press industry. Dimensions and related requirements Published By…
-
BS ISO 9772:2001:2004 Edition
Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame…
-
BS EN ISO 11064-1:2001
Ergonomic design of control centres – Principles for the design of control centres Published By…
-
ISO 8778:2003
Transmissions pneumatiques — Atmosphère normalisée de référence Published By Publication Date Number of Pages ISO…
-
AS/NZS 2210.8:2001
Occupational protective footwear – Additional specifications for protective footwear Published By Publication Date Number of…
-
BS EN ISO 877-2:2010:2011 Edition
Plastics. Methods of exposure to solar radiation – Direct weathering and exposure behind window glass…
-
ISO 18772:2008
Soil quality — Guidance on leaching procedures for subsequent chemical and ecotoxicological testing of soils…
-
AS/NZS 2210.9:2001
Occupational protective footwear – Additional specifications for occupational footwear Published By Publication Date Number of…
-
BSI 16/30344246 DC:2016 Edition
BS EN ISO 877-2. Plastics. Methods of exposure to solar radiation. Part 2. Direct weathering…
-
AS/NZS 2210.6:2001
Occupational protective footwear – Additional requirements and test methods Published By Publication Date Number of…
-
ISO 8872:2003
Aluminium caps for transfusion, infusion and injection bottles — General requirements and test methods Published…
-
ISO 8782-8:2000
Safety, protective and occupational footwear for professional use — Part 8: Additional specifications for occupational…
-
DIN EN ISO 877-3:2018 Edition
Plastics – Methods of exposure to solar radiation – Part 3: Intensified weathering using concentrated…
-
ISO 16871:2003
Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to…
-
ISO 8770:2003
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings —…