ISO 8791-3:2005
$27.95
Paper and board — Determination of roughness/smoothness (air leak methods) — Part 3: Sheffield method
| Published By | Publication Date | Number of Pages |
| ISO | 2005-02 | 20 |
ISO 8791-3:2005 specifies a method for the determination of the roughness of paper and board using the Sheffield apparatus.
The method is applicable to papers and boards which have Sheffield roughness values between 10 and about 3 000 ml per min. It is not suitable for soft papers which allow the lands of the test head to indent the surface, or for high air-permeance papers which allow a significant flow of air through the sheet, or for papers which will not lie flat during the test.
Related products
-
IEEE 802.1Q-2011
IEEE Standard for Local and metropolitan area networks–Media Access Control (MAC) Bridges and Virtual Bridged…
-
BS ISO 871:2006
Plastics. Determination of ignition temperature using a hot-air furnace Published By Publication Date Number of…
-
BS ISO 8791-3:2017
Paper and board. Determination of roughness/smoothness (air leak methods) – Sheffield method Published By Publication…
-
BS EN ISO 21012:2018
Cryogenic vessels. Hoses Published By Publication Date Number of Pages BSI 2018 24
-
BS EN ISO 8751:2007
Spring-type straight pins. Coiled, light duty Published By Publication Date Number of Pages BSI 2007…
-
BS EN ISO 22674:2006 2007
Dentistry. Metallic materials for fixed and removable restorations and appliances Published By Publication Date Number…
-
BS 7102-2:1989
Recommendations for algorithms for use in banking message authentication. – Message Authenticator Algorithm Published By…
-
IEEE 802.1Q 2011
IEEE Standard for Local and metropolitan area networks–Media Access Control (MAC) Bridges and Virtual Bridged…
-
BS 5281:1975
Specification for ferrule-secured eye terminations for wire ropes Published By Publication Date Number of Pages…
-
BS ISO 8791-4:2021
Paper and board. Determination of roughness/smoothness (air leak methods) – Print-surf method Published By Publication…
-
BS EN 474-1:2006+A6:2019
Earth-moving machinery. Safety – General requirements Published By Publication Date Number of Pages BSI 2019…
-
BS EN ISO 19069-2:2016
Plastics. Polypropylene (PP) moulding and extrusion materials – Preparation of test specimens and determination of…
-
BS EN ISO 3167:2014
Plastics. Multipurpose test specimens Published By Publication Date Number of Pages BSI 2014 18
-
BS ISO 871:1996:1997 Edition
Plastics. Determination of ignition temperature using a hot-air furnace Published By Publication Date Number of…
-
BS EN ISO 16634-2:2016
Food products. Determination of the total nitrogen content by combustion according to the Dumas principle…
-
BS EN ISO 8795:2001:2002 Edition
Plastics piping systems for the transport of water intended for human consumption. Migration assessment. Determination…
-
IEEE 802.1Q-2011:2012 Edition
IEEE Standard for Local and metropolitan area networks–Media Access Control (MAC) Bridges and Virtual Bridged…
-
IEEE 1003.1-2008
IEEE Standard for Information Technology – Portable Operating System Interface (POSIX(TM)) Published By Publication Date…
-
BS ISO 9599:2015
Copper, lead, zinc and nickel sulfide concentrates. Determination of hygroscopic moisture content of the analysis…
-
BS ISO 8791-3:2005
Paper and board. Determination of roughness/smoothness (air leak methods) – Sheffield method Published By Publication…
-
BS 7102-1:1989
Recommendations for algorithms for use in banking message authentication – Data Encryption Algorithm (DEA) Published…
-
BS EN ISO 8799:2009
Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Determination of content of unsulfated matter Published…
-
BS ISO 9022-7:2015
Optics and photonics. Environmental test methods – Resistance to drip or rain Published By Publication…
-
BS 2000-413:1996
Methods of test for petroleum and its products – Petroleum products. Low levels of vanadium…
-
BS EN ISO 8891:1995
Dental casting alloys with noble metal content of 25% up to but not including 75%…
-
BS EN ISO 13402:2001
Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure Published…
-
BS EN 10232:1994
Metallic materials. Tube (in full section). Bend test Published By Publication Date Number of Pages…
-
BS EN ISO 8491:2004
Metallic materials. Tube (in full section). Bend test Published By Publication Date Number of Pages…
-
BS EN ISO 13894-1:2015
High-pressure decorative laminates. Composite elements – Test methods Published By Publication Date Number of Pages…
-
BS EN 60695-1-21:2016
Fire hazard testing – Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary…
-
BS ISO 9022-3:2015
Optics and photonics. Environmental test methods – Mechanical stress Published By Publication Date Number of…
-
BS 5852:1990
Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming…
-
BS EN ISO 8891:2000
Dental casting alloys with noble metal content of at least 25% but less than 75%…
-
BS EN ISO 22476-11:2017
Geotechnical investigation and testing. Field testing – Flat dilatometer test Published By Publication Date Number…
-
BS ISO 8791-4:2007:2008 Edition
Paper and board. Determination of roughness/smoothness (air leak methods) – Print-surf method Published By Publication…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
-
BS ISO 9022-6:2015
Optics and photonics. Environmental test methods – Dust Published By Publication Date Number of Pages…
-
BS ISO 9022-20:2015
Optics and photonics. Environmental test methods – Humid atmosphere containing sulfur dioxide or hydrogen sulfide…
-
BS EN ISO 8799:1996
Analysis of surface active agents (raw materials). Ethoxylated alcohol and alkylphenol sulfates. Method for determination…
-
BS ISO 871:2022
Plastics. Determination of ignition temperature using a hot-air furnace Published By Publication Date Number of…
