ISO 9015-2:2016
$19.50
Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints
| Published By | Publication Date | Number of Pages |
| ISO | 2016-02 | 14 |
ISO 9015-2:2016 specifies microhardness testing on transverse sections of welded joints of metallic materials with high hardness gradients. It covers Vickers hardness tests in accordance with ISO 6507-1, normally with test loads of 0,98 N to less than 49 N (HV 0,1 to less than HV 5).
NOTE Testing ensures that the highest and/or the lowest level of hardness of both parent materials (in the case of dissimilar materials both parent materials) and weld metal is determined.
ISO 9015-2:2016 is not applicable to hardness testing of welds with loads of 49,03 N and above, which is covered by ISO 9015-1.
ISO 9015-2:2016 is not applicable to Vickers hardness testing of resistance spot, projection and seam welds, which is covered by ISO 14271.
This part of ISO 9015 is not applicable to hardness testing of very narrow welds, e.g. those typically produced by laser and electron beam welding (see ISO 22826).
Related products
-
ISO 9221-2:2015
Furniture — Children’s high chairs — Part 2: Test methods Published By Publication Date Number…
-
ISO 8600-2:2015
Endoscopes – Medical endoscopes and endotherapy devices — Part 2: Particular requirements for rigid bronchoscopes…
-
ISO 14084-2:2015
Process diagrams for power plants — Part 2: Graphical symbols Published By Publication Date Number…
-
ISO 15379-2:2015
Carbonaceous materials for the production of aluminium — Cathode block materials — Part 2: Determination…
-
ISO 17842-2:2015
Safety of amusement rides and amusement devices — Part 2: Operation and use Published By…
-
ISO 10958-2:2015
Surfs des neiges — Zone de montage de la fixation — Partie 2: Exigences et…
-
ISO 10439-2:2015
Petroleum, petrochemical and natural gas industries — Axial and centrifugal compressors and expander-compressors — Part…
-
ISO 23953-2:2015
Meubles frigorifiques de vente — Partie 2: Classification, exigences et méthodes d’essai Published By Publication…
-
ISO 21029-2:2015
Récipients cryogéniques — Récipients transportables, isolés, sous vide, d’un volume n’excédant pas 1000 litres —…
-
ISO 15360-2:2015
Recycled pulps — Estimation of Stickies and Plastics — Part 2: Image analysis method Published…
-
ISO 5172:2006/Amd 2:2015
Gas welding equipment — Blowpipes for gas welding, heating and cutting — Specifications and tests…
-
ISO 7626-2:2015
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using…
-
ISO 24253-2:2015
Matériel de protection des cultures — Essais de dépôt de la pulvérisation sur les grandes…
-
ISO 14132-2:2015
Optics and photonics — Vocabulary for telescopic systems — Part 2: Terms for binoculars, monoculars…
-
ISO 21415-2:2015
Blé et farines de blé — Teneur en gluten — Partie 2: Détermination du gluten…
-
ISO 15784-2:2015
Intelligent transport systems (ITS) — Data exchange involving roadside modules communication — Part 2: Centre…
-
ISO 24102-2:2015
Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management —…
-
BS EN ISO 9015-2:2016 – TC:2020 Edition
Tracked Changes. Destructive tests on welds in metallic materials. Hardness testing – Microhardness testing of…
-
ISO 7494-2:2015
Médecine bucco-dentaire — Unit dentaires — Partie 2: Systèmes d’alimentation en air et en eau,…
-
ISO 2834-2:2015
Graphic technology — Laboratory preparation test prints — Part 2: Liquid printing inks Published By…
-
ISO 6123-2:2015
Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics Published By Publication…
-
ISO 4696-2:2015
Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method…
-
ISO 6508-2:2015
Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines…
-
ISO 21009-2:2015
Cryogenic vessels — Static vacuum insulated vessels — Part 2: Operational requirements Published By Publication…
-
ISO 23900-2:2015
Pigments et matières de charge — Méthodes de dispersion et évaluation de l’aptitude à la…
-
BS EN ISO 9015-2:2016
Destructive tests on welds in metallic materials. Hardness testing – Microhardness testing of welded joints…
-
ISO 19973-2:2015
Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control…
-
ISO 6742-2:2015
Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices Published By Publication Date…
-
ISO 28921-2:2015
Industrial valves — Isolating valves for low-temperature applications — Part 2: Type testing Published By…
-
ISO 17090-2:2015
Health informatics — Public key infrastructure — Part 2: Certificate profile Published By Publication Date…
-
ISO 20765-2:2015
Natural gas — Calculation of thermodynamic properties — Part 2: Single-phase properties (gas, liquid, and…
-
ISO 11354-2:2015
Advanced automation technologies and their applications — Requirements for establishing manufacturing enterprise process interoperability —…
-
ISO 19150-2:2015
Information géographique — Ontologie — Partie 2: Règles pour le développement d’ontologies dans le langage…
-
ISO 16075-2:2015
Guidelines for treated wastewater use for irrigation projects — Part 2: Development of the project…
-
ISO 17641-2:2015
Destructive tests on welds in metallic materials — Hot cracking tests for weldments — Arc…
-
ISO 14817-2:2015
Intelligent transport systems — ITS central data dictionaries — Part 2: Governance of the Central…
-
ISO 484-2:2015
Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter between…
-
ISO/IEC 19794-2:2011/Amd 2:2015
Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — Amendment…
-
ISO 16859-2:2015
Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing…
-
ISO 21487:2012/Amd 2:2015
Small craft — Permanently installed petrol and diesel fuel tanks — Amendment 2 Published By…
