MN MinnesotaEnergyCode 2015
$54.17
Minnesota Energy Code with ANSI/ASHRAE/IES Standard 90.1-2010
Published By | Publication Date | Number of Pages |
MN | 2015 | 396 |
This is a fully integrated custom Minnesota code based on the 2012 International Energy Conservation Code® and ANSI/ASHRAE/IES Standard 90.1-2010: Energy Standard for Buildings Except Low-Rise Residential Buildings® . This code also includes Minnesota chapter 1300 Administration. Effective date: February 14, 2015
PDF Catalog
PDF Pages | PDF Title |
---|---|
1 | 2015 MINNESOTA ENERGY CODE WITH ANSI/ASHRAE/IES STANDARD 90.1-2010 |
2 | COPYRIGHT |
3 | MINNESOTA DEPARTMENT OF LABOR & INDUSTRY |
4 | IMPORTANT DISCLAIMER |
5 | PREFACE |
9 | EFFECTIVE USE OF THE INTERNATIONAL ENERGY CONSERVATION CODE |
11 | TABLE OF CONTENTS |
13 | 2015 MINNESOTA BUILDING CODE ADMINISTRATION 1300.0010 ADMINISTRATION 1300.0020 TITLE 1300.0030 PURPOSE AND APPLICATION 1300.0040 SCOPE |
14 | 1300.0050 CHAPTERS OF MINNESOTA STATE BUILDING CODE 1300.0060 OPTIONAL ADMINISTRATION 1300.0070 DEFINITIONS |
15 | 1300.0080 CODE ADOPTION AND AMENDMENTS 1300.0090 DEPARTMENT OF BUILDING SAFETY 1300.0110 DUTIES AND POWERS OF BUILDING OFFICIAL |
17 | 1300.0120 PERMITS |
19 | 1300.0130 CONSTRUCTION DOCUMENTS |
20 | 1300.0140 VIOLATIONS 1300.0150 VIOLATIONS, PENALTY 1300.0160 FEES |
21 | 1300.0170 STOP WORK ORDER 1300.0180 UNSAFE BUILDINGS OR STRUCTURES |
22 | 1300.0190 TEMPORARY STRUCTURES AND USES 1300.0210 INSPECTIONS |
23 | 1300.0215 PLUMBING 1300.0220 CERTIFICATE OF OCCUPANCY |
24 | 1300.0225 MAINTENANCE 1300.0230 BOARD OF APPEALS |
25 | 1300.0240 DISCLAIMER CLAUSE 1300.0250 SEVERABILITY |
27 | 2015 MINNESOTA RESIDENTIAL ENERGY CODE 1322.0010 ADOPTION OF INTERNATIONAL ENERGY CONSERVATION CODE (IECC) BY REFERENCE 1322.0015 ADMINISTRATION AND PURPOSE 1322.0030 REFERENCES TO OTHER INTERNATIONAL CODE COUNCIL (ICC) CODES 1322.0040 ADMINISTRATIVE PROCEDURE CRITERIA 1322.0100 ADMINISTRATION FOR RESIDENTIAL ENERGY |
28 | 1322.0103 CONSTRUCTION DOCUMENTS |
29 | CHAPTER 1 [RE] SCOPE AND ADMINISTRATION DELETED |
31 | CHAPTER 2 [RE] DEFINITIONS SECTION R201 GENERAL SECTION R202 GENERAL DEFINITIONS |
35 | CHAPTER 3 [RE] GENERAL REQUIREMENTS SECTION R301 CLIMATE ZONES |
36 | FIGURE R301.1 CLIMATE ZONES |
37 | TABLE R301.1 CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
38 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
39 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
40 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
41 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
42 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
43 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
44 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
45 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
46 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
47 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
48 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
49 | TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE R301.3(1) INTERNATIONAL CLIMATE ZONE DEFINITIONS |
50 | TABLE R301.3(2) INTERNATIONAL CLIMATE ZONE DEFINITIONS SECTION R302 DESIGN CONDITIONS SECTION R303 MATERIALS, SYSTEMS AND EQUIPMENT TABLE R303.1.3(1) DEFAULT GLAZED FENESTRATION U-FACTOR TABLE R303.1.3(2) DEFAULT DOOR U-FACTORS |
51 | TABLE R303.1.3(3) DEFAULT GLAZED FENESTRATION SHGC AND VT |
53 | CHAPTER 4 [RE] RESIDENTIAL ENERGY EFFICIENCY SECTION R401 GENERAL SECTION R402 BUILDING THERMAL ENVELOPE TABLE R402.1.1 INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENT |
56 | TABLE R402.1.3 EQUIVALENT U-FACTORS |
57 | TABLE R402.2.6 STEEL-FRAME CEILING, WALL AND FLOOR INSULATION (R-VALUE) |
59 | TABLE R402.4.1.1 AIR BARRIER AND INSULATION INSTALLATION SECTION R403 SYSTEMS |
60 | TABLE R403.2.1 MINIMUM REQUIRED DUCT AND PLENUM INSULATION FOR DWELLING UNITS |
61 | TABLE R403.4.2 MAXIMUM RUN LENGTH (feet) TABLE R403.5.1 MECHANICAL VENTILATION SYSTEM FAN EFFICACY TABLE R403.5.2 NUMBER OF BEDROOMS |
63 | TABLE R403.5.17 CLIMATIC DATA DESIGN CONDITIONS |
64 | SECTION R404 ELECTRICAL POWER AND LIGHTING SYSTEMS (MANDATORY) SECTION R405 SIMULATED PERFORMANCE ALTERNATIVE (PERFORMANCE) |
66 | TABLE R405.5.2(1) SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS |
67 | TABLE R405.5.2(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS |
68 | TABLE R405.5.2(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS TABLE R405.5.2(2) DEFAULT DISTRIBUTION SYSTEM EFFICIENCIES FOR PROPOSED DESIGNS |
69 | CHAPTER 5 REFERENCED STANDARDS AAMA ACCA ASHRAE ASTM |
70 | CSA HVI ICC NFRC US-FTC |
71 | WDMA |
73 | INDEX |
79 | 2015 MINNESOTA COMMERCIAL ENERGY CODE 1323.0010 INCORPORATION BY REFERENCE OF THE INTERNATIONAL ENERGY CONSERVATION CODE—COMMERCIAL ENERGY PROVISIONS 1323.0020 REFERENCES TO OTHER INTERNATIONAL CODE COUNCIL (ICC) CODES 1323.0030 ADMINISTRATIVE PROCEDURE CRITERIA 1323.0100 ADMINISTRATION FOR COMMERCIAL ENERGY CODE |
81 | CHAPTER 1 [CE] SCOPE AND ADMINISTRATION DELETED |
83 | CHAPTER 2 [CE]DEFINITIONS SECTION C201 GENERAL SECTION C202 GENERAL DEFINITIONS |
87 | CHAPTER 3 [CE] GENERAL REQUIREMENTS SECTION C301 CLIMATE ZONES |
88 | FIGURE C301.1 CLIMATE ZONES |
89 | TABLE C301.1 CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
90 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
91 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
92 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
93 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
94 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
95 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
96 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
97 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
98 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
99 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
100 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY |
101 | TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY TABLE C301.3(1) INTERNATIONAL CLIMATE ZONE DEFINITIONS |
102 | TABLE C301.3(2) INTERNATIONAL CLIMATE ZONE DEFINITIONS SECTION C302 DESIGN CONDITIONS SECTION C303 MATERIALS, SYSTEMS AND EQUIPMENT TABLE C303.1.3(1) DEFAULT GLAZED FENESTRATION U-FACTOR TABLE C303.1.3(2) DEFAULT DOOR U-FACTORS |
103 | TABLE C303.1.3(3) DEFAULT GLAZED FENESTRATION SHGC AND VT |
105 | CHAPTER 4 [CE] COMMERCIAL ENERGY EFFICIENCY SECTION C401 GENERAL SECTION C402 BUILDING ENVELOPE REQUIREMENTS |
106 | TABLE C402.2.1.1 MINIMUM ROOF REFLECTANCE AND EMITTANCE OPTIONS |
107 | TABLE C402.1.2 OPAQUE THERMAL ENVELOPE ASSEMBLY REQUIREMENTSa |
108 | TABLE C402.2 OPAQUE THERMAL ENVELOPE REQUIREMENTS |
109 | EQUATION 4-1 TABLE C402.3 BUILDING ENVELOPE REQUIREMENTS: FENESTRATION |
110 | EQUATION 4-2 TABLE C402.3.3.1 SHGC ADJUSTMENT MULTIPLIERS |
112 | TABLE C402.4.3 MAXIMUM AIR INFILTRATION RATE FOR FENESTRATION ASSEMBLIES |
113 | SECTION C403 BUILDING MECHANICAL SYSTEMS TABLE C403.2.1 CLIMATIC DATA DESIGN CONDITIONS EQUATION 4-3 EQUATION 4-4 |
115 | TABLE C403.2.3(1) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS |
116 | TABLE C403.2.3(1)—continued MINIMUM EFFICIENCY REQUIREMENTS:ELECTRICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS |
117 | TABLE C403.2.3(2) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS |
118 | TABLE C403.2.3(2)—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS |
119 | TABLE C403.2.3(3) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS AND ROOM AIR-CONDITIONER HEAT PUMPS |
120 | TABLE C403.2.3(3)—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS AND ROOM AIR-CONDITIONER HEAT PUMPS |
121 | TABLE 403.2.3(4) WARM AIR FURNACES AND COMBINATION WARM AIR FURNACES/AIR-CONDITIONING UNITS, WARM AIR DUCT FURNACES AND UNIT HEATERS, MINIMUM EFFICIENCY REQUIREMENTS |
122 | TABLE C403.2.3(5) MINIMUM EFFICIENCY REQUIREMENTS: GAS- AND OIL-FIRED BOILERS TABLE C403.2.3(6) MINIMUM EFFICIENCY REQUIREMENTS: CONDENSING UNITS, ELECTRICALLY OPERATED |
123 | TABLE C403.2.3(7) MINIMUM EFFICIENCY REQUIREMENTS: WATER CHILLING PACKAGES |
124 | TABLE C403.2.3(8) MINIMUM EFFICIENCY REQUIREMENTS: HEAT REJECTION EQUIPMENT TABLE C403.2.3(9) HEAT TRANSFER EQUIPMENT |
125 | TABLE C403.2.6 EXHAUST AIR ENERGY RECOVERY REQUIREMENT |
126 | TABLE C403.2.7 MINIMUM REQUIRED DUCT AND PLENUM INSULATION |
127 | EQUATION 4-5 TABLE C403.2.8 MINIMUM PIPE INSULATION THICKNESS (thickness in inches) |
128 | TABLE C403.2.10.1(1) FAN POWER LIMITATION TABLE C403.2.10.1(2) FAN POWER LIMITATION PRESSURE DROP ADJUSTMENT |
129 | TABLE C403.3.1(1) ECONOMIZER REQUIREMENTS TABLE C403.3.1(2) EQUIPMENT EFFICIENCY PERFORMANCE EXCEPTION FOR ECONOMIZERS |
130 | TABLE C403.3.1.1.3(1) HIGH-LIMIT SHUTOFF CONTROL OPTIONS FOR AIR ECONOMIZERS TABLE C403.3.1.1.3(2) HIGH-LIMIT SHUTOFF CONTROL SETTING FOR AIR ECONOMIZERS |
133 | TABLE C403.4.7 MAXIMUM HOT GAS BYPASS CAPACITY SECTION C404 SERVICE WATER HEATING (Mandatory) |
134 | TABLE C404.2 MINIMUM PERFORMANCE OF WATER-HEATING EQUIPMENT |
135 | SECTION C405 ELECTRICAL POWER AND LIGHTING SYSTEMS (MANDATORY) |
138 | TABLE C405.5.2(1) INTERIOR LIGHTING POWER ALLOWANCES: BUILDING AREA METHOD |
139 | TABLE C405.5.2(2) INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD TABLE C405.5.2(2)—continued INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD |
140 | TABLE C405.5.2(2)—continued INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD TABLE C405.6.2(1) EXTERIOR LIGHTING ZONES |
141 | TABLE C405.6.2(2) INDIVIDUAL LIGHTING POWER ALLOWANCES FOR BUILDING EXTERIORS SECTION C406 ADDITIONAL EFFICIENCY PACKAGE OPTIONS |
142 | TABLE C406.2(1) UNITARY AIR CONDITIONERS AND CONDENSING UNITS, ELECTRICALLY OPERATED, EFFICIENCY REQUIREMENTS TABLE C406.2(2) UNITARY AND APPLIED HEAT PUMPS, ELECTRICALLY OPERATED, EFFICIENCY REQUIREMENTS |
143 | TABLE C406.2(3) PACKAGED TERMINAL AIR CONDITIONERS AND PACKAGED TERMINAL HEAT PUMPS TABLE C406.2(4) WARM AIR FURNACES AND COMBINATION WARM AIR FURNACES/AIR-CONDITIONING UNITS, WARM AIR DUCT FURNACES AND UNIT HEATERS, EFFICIENCY REQUIREMENTS TABLE C406.2(5) BOILER, EFFICIENCY REQUIREMENTS |
144 | TABLE C406.2(6) CHILLERS—EFFICIENCY REQUIREMENTS |
145 | TABLE C406.2(7) ABSORPTION CHILLERS—EFFICIENCY REQUIREMENTS TABLE C406.3 REDUCED INTERIOR LIGHTING POWER SECTION C407 TOTAL BUILDING PERFORMANCE |
147 | TABLE C407.5.1(1) SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS |
148 | TABLE C407.5.1(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS |
149 | TABLE C407.5.1(2) HVAC SYSTEMS MAP |
150 | TABLE C407.5.1(3) SPECIFICATIONS FOR THE STANDARD REFERENCE DESIGN HVAC SYSTEM DESCRIPTIONS |
151 | TABLE C407.5.1(4) NUMBER OF CHILLERS TABLE C407.5.1(5) WATER CHILLER TYPES SECTION C408 SYSTEM COMMISSIONING |
155 | CHAPTER 5 REFERENCED STANDARDS AAMA AHAM AHRI |
156 | AMCA ANSI ASHRAE ASTM |
157 | CSA CTI DASMA |
158 | DOE ICC IESNA ISO |
159 | NFRC SMACNA UL US-FTC WDMA |
161 | INDEX |
169 | ANSI/ASHRAE/IES STANDARD 90.1 2010 ENERGY STANDARD FOR BUILDINGS EXCEPT LOW-RISE RESIDENTIAL BUILDINGS |
170 | ASHRAE STANDING STANDARD PROJECT COMMITTEE 90.1 |
171 | ASHRAE STANDARDS COMMITTEE 2009–2010 SPECIAL NOTE DISCLAIMER ASHRAE INDUSTRIAL ADVERTISING POLICY ON STANDARDS |
173 | CONTENTS |
174 | FOREWORD 1. PURPOSE 2. SCOPE |
175 | 3. DEFINITIONS, ABBREVIATIONS, AND ACRONYMS |
177 | FIGURE 3.1 COMPUTING THE DAYLIGHT AREA UNDER SKYLIGHTS |
178 | FIGURE 3.2 COMPUTING THE DAYLIGHT AREA UNDER ROOFTOP MONITORS |
184 | FIGURE 3.3 COMPUTING THE PRIMARY SIDELIGHTED AREA |
186 | FIGURE 3.4 COMPUTING THE SECONDARY SIDELIGHTED AREA |
188 | TABLE 3.1 HEATED SPACE CRITERIA |
191 | 4. ADMINISTRATION AND ENFORCEMENT |
193 | 5. BUILDING ENVELOPE |
195 | FIGURE 5.1 EXTERIOR AND SEMI-EXTERIOR BUILDING ENVELOPE |
196 | TABLE 5.5-1 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 1 |
197 | TABLE 5.5-2 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 2 |
198 | TABLE 5.5-3 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 3 |
199 | TABLE 5.5-4 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 4 |
200 | TABLE 5.5-5 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 5 |
201 | TABLE 5.5-6 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 6 |
202 | TABLE 5.5-7 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 7 |
203 | TABLE 5.5-8 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 8 |
204 | TABLE 5.5.3.1.2 INCREASED ROOF INSULATION LEVELS |
205 | TABLE 5.5.4.4.1 SHGC MULTIPLIERS FOR PERMANENT PROJECTIONS |
209 | 6. HEATING, VENTILATING, AND AIR CONDITIONING |
210 | TABLE 6.3.2 ELIMINATE REQUIRED ECONOMIZER FOR COMFORT COOLING BY INCREASING COOLING EFFICIENCY |
213 | TABLE 6.4.3.4.3 MAXIMUM DAMPER LEAKAGE (cfm per ft2) at 1.0 in. w.g. |
216 | TABLE 6.5.1A MINIMUM FAN-COOLING UNIT SIZE FOR WHICH AN ECONOMIZER IS REQUIRED FOR COMFORT COOLING TABLE 6.5.1B MINIMUM FAN-COOLING UNIT SIZE FOR WHICH AN ECONOMIZER IS REQUIRED FOR COMPUTER ROOMS |
217 | TABLE 6.5.1.1.3A HIGH-LIMIT SHUTOFF CONTROL OPTIONS FOR AIR ECONOMIZERS TABLE 6.5.1.13B HIGH-LIMIT SHUTOFF CONTROL SETTINGS FOR AIR ECONOMIZERS |
220 | TABLE 6.5.3.1.1A FAN POWER LIMITATION TABLE 6.5.3.1.1B FAN POWER LIMITATION PRESSURE DROP ADJUSTMENT |
222 | TABLE 6.5.4.5 PIPING SYSTEM DESIGN MAXIMUM FLOW RATE IN GPM |
223 | TABLE 6.5.6.1 ENERGY RECOVERY REQUIREMENT |
224 | TABLE 6.5.7.1.3 MAXIMUM NET EXHAUST FLOW RATE, CFM PER LINEAR FOOT OF HOOD LENGTH TABLE 6.5.9 HOT GAS BYPASS LIMITATION |
226 | TABLE 6.8.1A ELECTRONICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS MINIMUM EFFICIENCY REQUIREMENTS |
227 | TABLE 6.8.1A ELECTRONICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS MINIMUM EFFICIENCY REQUIREMENTS |
228 | TABLE 6.8.1B ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS MINIMUM EFFICIENCY REQUIREMENTS |
229 | TABLE 6.8.1B ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS MINIMUM EFFICIENCY REQUIREMENTS |
230 | TABLE 6.8.1C WATER CHILLING PACKAGES-EFFICIENCY REQUIREMENTS |
231 | TABLE 6.8.1D ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE-PACKAGE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS, AND ROOM AIR-CONDITIONER HEAT PUMPS- MINIMUM EFFICIENCY REQUIREMENTS |
232 | TABLE 6.8.1D ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE-PACKAGE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS, AND ROOM AIR-CONDITIONER HEAT PUMPS-MINIMUM EFFICIENCY REQUIREMENTS TABLE 6.8.1E WARM-AIR FURNACES AND COMBINATION WARM-AIR FURNACES/AIR-CONDITIONING UNITS, WARM-AIR DUCT FURNACES, AND UNIT HEATERS TABLE 6.8.1E WARM-AIR FURNACES AND COMBINATION WARM-AIR FURNACES/AIR-CONDITIONING UNITS, WARM-AIR DUCT FURNACES, AND UNIT HEATERS |
233 | TABLE 6.8.1F GAS AND OIL-FIRED BOILERS, MINIMUM EFFICIENCY REQUIREMENTS TABLE 6.8.1F GAS AND OIL FIRED BOILERS, MINIMUM EFFICIENCY REQUIREMENTS |
234 | TABLE 6.8.1G PERFORMANCE REQUIREMENTS FOR HEAT REJECTION EQUIPMENT TABLE 6.8.1H HEAT TRANSFER EQUIPMENT TABLE 6.8.1I ELECTRICALLY OPERATED VARIABLE REFRIGERANT FLOW AIR CONDITIONERS-MINIMUM EFFICIENCY REQUIREMENTS |
235 | TABLE 6.8.1J ELECTRICALLY OPERATED VARIABLE REFRIGERANT FLOW AIR TO AIR AND APPLIED HEAT PUMPS MINIMUM EFFICIENCY REQUIREMENTS |
236 | TABLE 6.8.1J ELECTRICALLY OPERATED VARIABLE REFRIGERANT FLOW AIR TO AIR AND APPLIED HEAT PUMPS MINIMUM EFFICIENCY REQUIREMENTS |
237 | TABLE 6.8.1K AIR CONDITIONERS AND CONDENSING UNITS SERVING COMPUTERS ROOMS |
238 | TABLE 6.8.2A MINIMUM DUCT INSULATION R-VALUE, COOLING AND HEATING ONLY SUPPLY DUCTS AND RETURN DUCTS TABLE 6.8.2B MINIMUM DUCT INSULATION R-VALUE, COMBINED HEATING AND COOLING SUPPLY DUCTS AND RETURN DUCTS |
239 | TABLE 6.8.3A MINIMUM PIPE INSULATION THICKNESS HEATING AND HOT WATER SYSTEMS (Steam, Steam Condensate, Hot Water Heating and Domestic Water Systems) TABLE 6.8.3B MINIMUM PIPE INSULATION THICKNESS COOLING SYSTEMS (Chilled Water, Brine, and Refrigerant)a,b,c |
240 | 7. SERVICE WATER HEATING |
242 | TABLE 7.8 PERFORMANCE REQUIREMENTS FOR WATER HEATING EQUIPMENT |
243 | 8. POWER TABLE 8.1 MINIMUM NOMINAL EFFICIENCY LEVELS FOR NEMA CLASS I LOW-VOLTAGE DRY-TYPE DISTRIBUTION TRANSFORMERS |
245 | 9. LIGHTING |
248 | TABLE 9.4.3A EXTERIOR LIGHTING ZONES |
249 | TABLE 9.4.3B INDIVIDUAL LIGHTING POWER ALLOWANCES FOR BUILDING EXTERIORS |
250 | TABLE 9.4.3B INDIVIDUAL LIGHTING POWER ALLOWANCES FOR BUILDING EXTERIORS |
251 | TABLE 9.5.1 LIGHTING POWER DENSITIES USING THE BUILDING AREA METHOD |
253 | TABLE 9.6.1 LIGHTING POWER DENSITIES USING THE SPACE BY SPACE METHOD TABLE 9.6.1 LIGHTING POWER DENSITIES USING THE SPACE BY SPACE METHOD |
254 | TABLE 9.6.1 LIGHTING POWER DESITIES USING THE SPACE BY SPACE METHOD TABLE 9.6.1 LIGHTING POWER DESNSITIES USING THE SPACE BY SPACE METHOD |
255 | TABLE 9.6.2 CONTROL FACTORS USED IN CALCULATING ADDITIONAL INTERIOR LIGHTING POWER ALLOWANCE |
256 | 10. OTHER EQUIPMENT |
257 | TABLE 10.8A MINIMUM NOMNIAL EFFICIENCY FOR GENERAL PURPOSE DESIGN A AND DESIGN B MOTORS RATED 600 VOLTS OR LESS TABLE 10.8B MINIMUM NOMINAL FULL-LOAD EFFICIENCY FOR 60 HZ NEMA GENERAL PURPOSE ELECTRIC MOTORS (SUBTYPE I) RATED 600 VOLTS OR LESS (RANDOM WOUND) |
258 | TABLE 10.8B MINIMUM NOMINAL FULL-LOAD EFFICIENCY FOR 60 HZ NEMA GENERAL PURPOSE ELECTRIC MOTORS (SUBTYPE I) RATED 600 VOLTS OR LESS (RANDOM WOUND) continued TABLE 10.8C MINIMUM NOMINAL FULL-LOAD EFICIENCY OF GENERAL PURPOSE ELECTRIC MOTORS (Subtype II and Design B)a |
259 | TABLE 10.8C MINIMUM NOMINAL FULL-LOAD EFICIENCY OF GENERAL PURPOSE ELECTRIC MOTORS (Subtype II and Design B)a continued |
260 | 11. ENERGY COST BUDGET METHOD |
262 | TABLE 11.3.1 MODELING REQUIREMENTS FOR CALCULATING DESIGN ENERGY COST AND ENERGY COST BUDGET |
263 | TABLE 11.3.1 MODELING REQUIREMENTS FOR CALCULATING DESIGN ENERGY COST AND ENERGY COST BUDGET |
264 | TABLE 11.3.1 MODELING REQUIREMENTS FOR CALCULATING DESIGN ENERGY COST AND ENERGY COST BUDGET |
265 | TABLE 11.3.1 MODELING REQUIREMENTS FOR CALCULATING DESIGN ENERGY COST AND ENERGY COST BUDGET |
266 | TABLE 11.3.1 MODELING REQUIREMENTS FOR CALCULATING DESIGN ENERGY COST AND ENERGY COST BUDGET FIGURE11.3.2 HVAC SYSTEMS MAP |
267 | TABLE 11.3.2A BUDGET SYSTEM DESCRIPTIONS |
268 | TABLE 11.3.2B NUMBER OF CHILLERS TABLE 11.3.2C WATER CHILLER TYPES TABLE 11.3.2D ECONOMIZER HIGH-LIMIT SHUTOFF |
269 | 12. NORMATIVE REFERENCES |
273 | NORMATIVE APPENDIX A RATED R-VALUE OF INSULATION AND ASSEMBLY U-FACTOR, C-FACTOR, AND F-FACTOR DETERMINATIONS A1. GENERAL A2. ROOFS TABLE A2.2 ASSEMBLY U-FACTORS FOR ROOFS WITH INSULATION ENTIRELY ABOVE DECK |
274 | A3. ABOVE-GRADE WALLS |
275 | TABLE A2.3 ASSEMBLY U-FACTORS FOR METAL BUILDING ROOFS |
276 | TABLE A2.4 ASSEMBLY U-FACTORS FOR ATTIC ROOFS WITH WOOD JOISTS |
277 | TABLE A2.4 ASSEMBLY U-FACTORS FOR ATTIC ROOFS WITH WOOD JOISTS TABLE A2.4.2 SINGLE-RAFTER ROOFS TABLE A2.5 ASSEMBLY U-FACTORS FOR ATTIC ROOFS WITH STEEL JOISTS |
278 | TABLE A3.1A ASSEMBLY U-FACTORS FOR ABOVE-GRADE CONCRETE WALLS AND MASONRY WALLS |
279 | TABLE A3.1A ASSEMBLY U-FACTORS FOR ABOVE GRADE CONCRETE WALLS AND MASONRY WALLS |
280 | TABLE A3.1A ASSEMBLY U-FACTORS FOR ABOVE GRADE CONCRETE WALLS AND MASONRY WALLS TABLE A3.1B ASSEMBLY U-FACTORS C-FACTORS AND HC FOR CONCRETE |
281 | TABLE A3.1B ASSEMBLY U-FACTORS, C-FACTORS AND HC FOR CONCRETE TABLE A3.1C ASSEMBLY U-FACTORS, C-FACTORS AND HC FOR CONCRETE BLOCK WALLS |
282 | TABLE A3.1C ASSEMBLY U-FACTORS AND HC FOR CONCRETE BLOCK WALLS |
283 | TABLE A3.1C ASSEMBLY U-FACTORS, C-FACTORS AND HC FOR CONCRETE BLOCK WALLS |
284 | TABLE A3.1D EFFECTIVE R-VALUES FOR INSULATION/FRAMING LAYERS ADDED TO ABOVE-GRADE MASS WALLS AND BELOW-GRADE |
285 | TABLE A3.2 ASSEMBLY U-FACTORS FOR METAL BUILDING WALLS |
287 | TABLE A3.3 ASSEMBLY U-FACTORS FOR STEEL FRAME WALLS |
288 | TABLE A3.4 ASSEMBLY U-FACTORS FOR WOOD-FRAME WALLS |
289 | A4. BELOW-GRADE WALLS TABLE A4.2 ASSEMBLY C-FACTORS FOR BELOW GRADE WALLS |
290 | TABLE A4.2 ASSEMBLY C-FACTORS FOR BELOW GRADE WALLS A5. FLOORS |
292 | TABLE A5.2 ASSEMBLY U-FACTORS FOR MASS FLOORS |
293 | TABLE A5.3 ASSEMBLY U-FACTORS FOR STEEL JOIST FLOORS |
294 | TABLE A5.4 ASSEMBLY U-FACTORS FOR WOOD JOISTS FLOORS |
295 | A6. SLAB-ON-GRADE FLOORS A7. OPAQUE DOORS A8. FENESTRATION |
296 | TABLE A6.3 ASSEMBLY F-FACTORS FOR SLAB ON GRADE FLOORS TABLE A8.1A ASSEMBLY U-FACTORS FOR UNLABELED SKYLIGHTS |
297 | TABLE A8.1A ASSEMBLY U-FACTORS FOR UNLABELED SKYLIGHTS |
298 | TABLE A8.1A ASSEMBLY U-FACTORS FOR UNLABELED SKYLIGHTS TABLE A8.1B ASSEMBLY SHGC AND ASSEMBLY VISIBLE TRANSMITTANCES FOR UNLABELED SKYLIGHTS |
299 | TABLE A8.1B ASSEMBLY SHGCS AND ASSEMBLY VISIBLE TRANSMITTANCES FOR UNLABELED SKYLIGHTS TABLE A8.2 ASSEMBLY U-FACTORS, ASSEMBLY SHGCS AND ASSEMBLY VISIBLE TRANSMITTANCES |
300 | A9. DETERMINATION OF ALTERNATE ASSEMBLY U-FACTORS, C-FACTORS, F-FACTORS, OR HEAT CAPACITIES TABLE A9.2A EFFECTIVE INSULATION/FRAMING LAYER R-VALUES FOR ROOF AND FLOOR INSULATION INSTALLED BETWEEN METAL FRAMING |
301 | TABLE A9.2B EFFECTIVE INSULATION/FRAMING LAYER R-VALUES FOR WALL INSULATION INSTALLED BETWEEN STEEL FRAMING |
302 | TABLE A9.4A VALUES FOR CAVITY AIR SPACES TABLE A9.4B EMITTANCE VALUES OF VARIOUS SURFACES AND EFFECTIVE EMITTANCES OF AIR SPACES TABLE A9.4C EFFECTIVE R-VALUES FOR FIBERGLASS |
303 | TABLE A9.4D R-VALUES FOR BUILDING MATERIALS TABLE A9.4E THERMAL CONDUCTIVITY OF CONCRETE BLOCK MATERIAL |
304 | NORMATIVE APPENDIX B—BUILDING ENVELOPE CLIMATE CRITERIA B1. GENERAL FIGURE B-1 U.S. MAP SHOWING DOE CLIMATE ZONES |
305 | TABLE B-1 US CLIMATE ZONES |
306 | TABLE B-1 US CLIMATE ZONES |
307 | TABLE B-1 US CLIMATE ZONES |
308 | TABLE B-1 US CLIMATE ZONES |
309 | TABLE B-1 US CLIMATE ZONES |
310 | TABLE B-1 US CLIMATE ZONES |
311 | TABLE B-1 US CLIMATE ZONES |
312 | B2. MAJOR CLIMATE TYPE DEFINITIONS TABLE B-2 CANADIAN CLIMATIC ZONES |
313 | TABLE B-3 INTERNATIONAL CLIMATE ZONES |
314 | TABLE B-4 INTERNATIONAL CLIMATE ZONE DEFINITIONS |
315 | NORMATIVE APPENDIX C METHODOLOGY FOR BUILDING ENVELOPE TRADE-OFF OPTION IN SUBSECTION 5.6 C1. MINIMUM INFORMATION FIGURE C1.3 SKYLIGHT WELL DIMENSIONS C2. OUTPUT REQUIREMENTS C3. BASE ENVELOPE DESIGN AND PROPOSED DESIGN SPECIFICATION |
316 | TABLE C3.5 VT FACTOR FOR THE BASE ENVELOPE DESIGN C4. ZONING AND BUILDING GEOMETRY C5. MODELING ASSUMPTIONS |
317 | C6. EQUATIONS FOR ENVELOPE TRADE-OFF CALCULATIONS TABLE C6.1 INPUT VARIABLES EQUATION C-1 EQUATION C-2 EQUATION C-3 EQUATION C-5 EQUATION C-6 EQUATION C-7 |
318 | EQUATION C-8 EQUATION C-9 EQUATION C-10 EQUATION C-11 TABLE C6.5.1 OVERHANG PROJECTION COEFFICIENTS TABLE C6.6 COEFFICIENTS FOR CALCULATING KD EQUATION C-12 |
319 | TABLE C6.7A COOLING DELTA LOAD COEFFICIENTS TABLE C6.7B HEATING DELTA LOAD COEFFICIENTS EQUATION C-13 |
320 | EQUATION C-15 EQUATION C-17 |
321 | TABLE C6.8.2 COOLING COEFFICIENTS FOR THE EXTERIOR WALL EQUATION |
322 | EQUATION C-18 TABLE C6.8.3 HEATING COEFFICIENTS FOR THE EXTERIOR WALL EQUATION |
323 | EQUATION C-20 EQUATION C-21 EQUATION C-22 TABLE C6.9 HEATING AND COOLING COEFFICIENTS FOR SKYLIGHTS TABLE C6.10.1 EFFECTIVE R-VALUE OF SOIL FOR BELOW GRADE WALLS TABLE C6.10.2 HEATING AND COOLING COEFFICIENTS FOR OTHER EXTERIOR AND SEMI-EXTERIOR SURFACES |
324 | NORMATIVE APPENDIX D CLIMATIC DATA TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
325 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
326 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
327 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
328 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
329 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
330 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
331 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
332 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
333 | TALBE D-1 US AND US TERRITORY CLIMATIC DATA |
334 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
335 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
336 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
337 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
338 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
339 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
340 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
341 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
342 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
343 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
344 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
345 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
346 | TABLE D-1 US AND US TERRITORY CLIMATIC DATA |
347 | TABLE D-2 CANADIAN CLIMATIC DATA |
348 | TABLE D-2 CANADIAN CLIMATIC DATA |
349 | TABLE D-2 CANADIAN CLIMATIC DATA |
350 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
351 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
352 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
353 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
354 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
355 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
356 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
357 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
358 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
359 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
360 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
361 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
362 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
363 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
364 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
365 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
366 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
367 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
368 | TABLE D-3 INTERNATIONAL CLIMATIC DATA |
369 | INFORMATIVE APPENDIX E INFORMATIVE REFERENCES |
371 | INFORMATIVE APPENDIX F ADDENDA DESCRIPTION INFORMATION TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1 2010 |
372 | TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1 2010 |
373 | TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1 2010 |
374 | TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDAR 90.1 2010 |
375 | TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1 2010 |
376 | TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1 2010 |
377 | TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1 2010 |
378 | TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1 2010 |
379 | NORMATIVE APPENDIX G PERFORMANCE RATING METHOD G1. GENERAL |
380 | G2. SIMULATION GENERAL REQUIREMENTS G3. CALCULATION OF THE PROPOSED AND BASELINE BUILDING PERFORMANCE |
381 | TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE |
382 | TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE |
383 | TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE |
384 | TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE |
385 | TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE |
386 | TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE |
387 | TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE |
388 | TABLE G3.1.1A BASELINE HAVAC SYSTEM TYPES TABLE G3.1.1B BASELINE SYSTEM DESCRIPTIONS |
390 | TABLE G3.1.2.6A CLIMATE CONDITIONS UNDER WHICH ECONOMIZERS ARE INCLUDED FOR BASELINE SYSTEMS 3 THROUGH 8 TABLE G3.1.2.6B ECONOMIZER HIGH-LIMIT SHUTOFF TABLE G3.1.2.9 BASELINE FAN BRAKE HORSEPOWER TABLE G3.1.3.7 TYPE AND NUMBER OF CHILLERS |
391 | TABLE G3.1.3.15 PART-LOAD PERFORMANCE FOR VAV FAN SYSTEMS TABLE G3.2 POWER ADJUSTMENT PERCENTAGES FOR AUTOMATIC LIGHTING CONTROLS |
393 | NOTICE |
394 | FORM FOR SUBMITTAL OF PROPOSED CHANGE TO AN ASHRAE STANDARD UNDER CONTINUOUS MAINTENANCE |
395 | POLICY STATEMENT DEFINING ASHRAE’S CONCERN FOR THE ENVIRONMENTAL IMPACT OF ITS ACTIVITIES |
396 | IMPORTANT NOTICES ABOUT THIS STANDARD |