🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
NFPA 1192, Standard on Recreational Vehicles:2021 Edition

NFPA 1192, Standard on Recreational Vehicles:2021 Edition

$54.60

NFPA 1192, Standard on Recreational Vehicles

Published By Publication Date Number of Pages
NFPA 2021 106
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

PDF Catalog

PDF Pages PDF Title
1 Copyright
Edition
Origin and Development
3 Committee Lists for NFPA-1192-2021
5 Chapter 1 : Administration
1.1 * Scope.
1.2 Purpose.
1.3 Application. 1.3.1 *
1.3.2
1.4 Retroactivity.
1.5 Equivalency.
1.6 * Use of International System of Units (SI).
Chapter 2 : Referenced Publications
2.1 General.
6 2.2 NFPA Publications.
2.3 Other Publications. 2.3.1 ANSI Publications.
2.3.2 ASME Publications.
2.3.3 ASTM Publications.
2.3.4 CSA Group Publications.
2.3.5 NATM Publications.
7 2.3.6 RVIA Publications.
2.3.7 SAE Publications.
2.3.8 TC Publications.
2.3.9 UL Publications.
8 2.3.10 ULC Publications.
2.3.11 U.S. Government Publications.
2.3.12 Other Publications.
2.4 References for Extracts in Mandatory Sections.
Chapter 3 : Definitions
3.1 General.
3.2 NFPA Official Definitions. 3.2.1 * Approved.
3.2.2 * Authority Having Jurisdiction (AHJ).
9 3.2.3 Labeled.
3.2.4 * Listed.
3.2.5 Shall.
3.3 General Definitions. 3.3.1 Accessible.
3.3.2 Anti-Siphon Trap Vent Device.
3.3.3 Appliance. 3.3.3.1
3.3.3.2
3.3.4 * Axle Height.
3.3.5 Backflow.
3.3.6 Backflow Preventer.
3.3.7 * Bias Ply Tire.
3.3.8 Branch.
3.3.9 Center.
3.3.10 Clearance Line. 3.3.10.1
3.3.10.2
10 3.3.11 Combination Compartment.
3.3.12 Compartment.
3.3.13 Connection. 3.3.13.1
3.3.13.2
3.3.14 Container Pressure.
3.3.15 Continuous Waste.
3.3.16 Diameter.
3.3.17 Dispensing.
3.3.18 Distribution.
3.3.19 Drain.
3.3.19.1
3.3.19.2
3.3.20 Drain Hose.
3.3.21 Drain Outlet.
3.3.22 Fixed Maximum Liquid Level Gauge.
3.3.23 Fixtures (Plumbing).
3.3.24 Flexible Drainage Connector.
11 3.3.25 Flood Level.
3.3.26 Frame.
3.3.27 Fuel Cell Device.
3.3.28 Fuel Cell System.
3.3.29 Fuel System.
3.3.30 Grade.
3.3.31 * Gross Trailer Area.
3.3.32 Hose.
3.3.33 Hose Nozzle Valve.
3.3.34 Identified (as applied to equipment).
3.3.35 * Interior Finish.
3.3.36 Loft.
3.3.37 Low-Pressure Piping.
3.3.38 Main.
3.3.39 Means of Escape (Recreational Vehicle).
3.3.40 Overfilling Prevention Device (OPD).
3.3.41 * Pipe.
3.3.41.1
12 3.3.41.2
3.3.42 * Piping.
3.3.43 Plumbing Vent.
3.3.43.1
3.3.43.2
3.3.43.3
3.3.43.4
3.3.43.5
3.3.43.6
3.3.44 Potable Water Storage Tank.
3.3.45 * Pressure Relief Valve.
3.3.46 Propane (Liquefied Petroleum Gas, LP-Gas, LPG).
3.3.47 Propane Container.
3.3.47.1
3.3.47.2
3.3.48 Propane Supply Connection.
3.3.49 Propane Supply Connector.
3.3.50 * Protruding Component.
3.3.51 Readily Accessible.
13 3.3.52 * Recreational Vehicle (RV).
3.3.53 Regulated High-Pressure Piping.
3.3.54 Slope.
3.3.55 System. 3.3.55.1
3.3.55.2
3.3.55.3 *
3.3.55.4
3.3.56 Tank. 3.3.56.1
3.3.56.2 *
3.3.57 Toilet. 3.3.57.1
3.3.57.2
3.3.58 Toilet Trap Arm.
3.3.59 Trap.
3.3.60 Trap Arm.
3.3.61 Trap Seal.
3.3.62 * Tubing.
14 3.3.63 Vacuum Breaker.
3.3.64 Valve. 3.3.64.1
3.3.64.2
3.3.65 * Vapor Resistant.
3.3.66 Vent System (Waste).
3.3.67 Waste. 3.3.67.1
3.3.67.2
3.3.68 Waste Holding Tank.
3.3.69 Water Seal Trap.
Chapter 4 : General Requirements
4.1 Differing Standards.
4.2 U.S. Federal Regulations.
4.3 Labels. 4.3.1
4.3.2
4.4 Electrical Requirements.
15 4.4.1
4.4.2
Chapter 5 : Fuel Systems and Equipment
5.1 Quality of Design and Installation.
5.2 Propane Systems. 5.2.1 Maximum Container Capacities. 5.2.1.1
5.2.1.2
5.2.2 Construction of Propane Containers. 5.2.2.1
5.2.2.2
5.2.3 Location of Propane Containers. 5.2.3.1
5.2.3.2
5.2.3.3
16 5.2.3.4
5.2.4 Securing of Propane Containers. 5.2.4.1
5.2.4.2
5.2.5 Heat Shielding of Propane Containers and Piping. 5.2.5.1
5.2.5.2
5.2.6 Ventilation of Compartments Containing Propane Containers. 5.2.6.1
5.2.6.2
5.2.6.3
5.2.6.4
5.2.6.5
5.2.6.6
17 5.2.7 Securing Propane Cylinder Housings. 5.2.7.1
5.2.7.2
5.2.8 Fastenings for Propane Cylinders in Compartments.
5.2.9 Elimination of Ignition Sources.
5.2.10 Propane Container Appurtenances and Location. 5.2.10.1
5.2.10.2
5.2.11 Location of Remotely Controlled Appurtenances. 5.2.11.1
5.2.11.2
5.2.11.3
5.2.12 * Valves for Multiple Propane Cylinder Assembly System.
5.2.13 Overfilling Prevention Devices. 5.2.13.1
5.2.13.2
5.2.14 Protection of Propane Cylinder’s Shutoff Valves. 5.2.14.1
5.2.14.2
18 5.2.15 Propane Regulators. 5.2.15.1
5.2.15.2
5.2.15.3
5.2.15.4
5.2.15.5
5.2.15.6
5.2.15.7
5.2.15.8
5.2.15.9
5.2.16 Propane Shutoff Valves, Excess Flow Valves, and Backflow Check Valves. 5.2.16.1
5.2.16.1.1
5.2.16.1.2
5.2.16.2
5.2.16.3
5.2.16.4
19 5.2.17 Propane Container Pressure Relief Valves. 5.2.17.1
5.2.17.2
5.2.17.3
5.2.18 Regulator Pressure Relief Valves. 5.2.18.1
5.2.18.2
5.2.19 * Discharge from Propane Container Pressure Relief Valves. 5.2.19.1
5.2.19.2
5.2.19.3
5.2.19.3.1
5.2.19.3.2
5.2.19.3.3
5.2.19.3.4
20 5.2.19.3.5
5.2.19.3.6
5.2.19.3.7
5.2.19.3.8
5.2.19.3.9
5.2.19.3.10
5.2.19.3.11
5.2.19.3.12
5.2.19.3.13
5.2.19.3.14
5.2.20 Propane System Design. 5.2.20.1
5.2.20.2
5.2.21 Appliance Pressure Rating. 5.2.21.1
5.2.21.2
21 5.2.22.2
5.2.22.3
5.2.22.4
5.2.22.5
5.3 Propane Piping Systems. 5.3.1 General. 5.3.1.1
5.3.1.2
5.3.1.3
5.3.1.4
22 5.3.2 Propane Piping System Materials. 5.3.2.1
5.3.2.2
5.3.2.3
5.3.2.4
5.3.2.5
5.3.3 Propane Piping Design.
5.3.4 Propane Pipe Sizing. 5.3.4.1
5.3.4.2
24 5.3.4.3
5.3.5 Joints for Propane Pipe. 5.3.5.1
5.3.5.2
5.3.5.3
5.3.5.4
5.3.6 Propane Tubing Joints. 5.3.6.1
5.3.6.2
5.3.6.3
5.3.6.4
5.3.7 Pipe Joint Materials. 5.3.7.1
5.3.7.2
5.3.8 Routing and Protection of Tubing and Hose. 5.3.8.1
5.3.8.2
5.3.8.3
25 5.3.8.4
5.3.8.5
5.3.8.6
5.3.9 Restrictions on Concealing Joints in Propane Piping or Tubing. 5.3.9.1
5.3.9.2
5.3.9.3
5.3.10 Propane and Natural Gas Supply Connection Location. 5.3.10.1
5.3.10.2
5.3.11 Special Requirement for Regulated High-Pressure Piping. 5.3.11.1
5.3.11.2
5.3.11.3
5.3.12 Propane and Natural Gas Supply Connections. 5.3.12.1
5.3.12.2
5.3.12.3
5.3.12.3.1
26 5.3.12.3.2
5.3.12.3.3
5.3.12.4
5.3.12.4.1
5.3.12.4.2
5.3.12.4.3
5.3.13 Flexible Nonmetallic Tubing and Hose Connections.
5.3.14 Quick Disconnect Devices. 5.3.14.1
5.3.14.2
5.3.14.3
5.3.15 Propane Shutoff Valves.
5.3.16 Propane Inlet Cap. 5.3.16.1
5.3.16.2
5.3.16.3
5.3.17 Prohibiting Use of Propane Piping as Electrical Ground.
5.3.18 Propane Piping Support. 5.3.18.1
5.3.18.2
27 5.3.18.3
5.3.18.4
5.3.19 Testing Low-Pressure Piping Systems for Propane Leakage Before Appliances Are Connected. 5.3.19.1
5.3.19.2
5.3.19.3
5.3.19.4
5.3.19.5
5.3.19.6
5.3.20 Testing Low-Pressure Piping Systems for Propane Leakage After Appliances Are Connected. 5.3.20.1
5.3.20.2
5.3.20.3
5.3.20.4
5.3.20.5
5.3.20.6
28 5.3.20.7
5.3.21
5.3.21.1
5.3.21.2
5.3.21.3
5.3.21.4
5.3.21.5
5.3.21.6
5.3.22 Leak Testing the Regulated High-Pressure Piping Systems. 5.3.22.1
5.3.22.2
5.3.22.3
5.3.22.4
5.3.22.5
29 5.4 Fuel-Burning Appliances. 5.4.1 Listing Requirements. 5.4.1.1
5.4.1.2
5.4.2 Basic Venting Requirements.
5.4.3 Propane Appliance Utilization.
5.4.4 Conversion of Appliances.
5.4.5 Installation of Fuel Burning Appliances. 5.4.5.1
5.4.5.2
5.4.5.3
5.4.6 Requirement for Direct Vent System Appliances. 5.4.6.1
5.4.6.2
5.4.6.3
5.4.6.4
5.4.6.5
30 5.4.7 Exterior Appliances. 5.4.7.1
5.4.7.2
5.4.7.3
5.4.7.4
5.4.8 Auxiliary Heating Devices. 5.4.8.1
5.4.8.2
5.4.8.3
5.4.9 Special Requirement for Forced-Air Heating Appliances.
5.5 Venting, Ventilation, and Combustion Air. 5.5.1 Installation of Venting and Combustion Air Systems.
5.5.2 Location of Flue Gas Outlets of Fuel-Burning Appliances. 5.5.2.1
5.5.2.2
5.5.2.3
5.5.2.4
5.5.3 * Location of Combustion Air Inlets and Flue Gas Outlets of Fuel-Burning Appliances.
31 5.5.3.1
5.5.3.2
5.5.3.3 *
5.5.4 Ventilation of Areas Accommodating Fuel-Burning Cooking Appliances. 5.5.4.1
5.5.4.2
5.5.4.3
5.5.4.4
5.5.4.5
5.5.4.6
5.5.4.7
5.5.4.8
5.6 Marking Appliances (Installation and Operation Features). 5.6.1 Clearances, Input Ratings, Lighting, and Shutdown. 5.6.1.1
5.6.1.2
5.6.2 Type(s) of Fuel. 5.6.2.1
32 5.6.2.2
5.6.3 Accessibility for Service and Operation. 5.6.3.1
5.6.3.2
5.6.4 Doors and Window Treatments.
5.6.5 Location of Privacy Curtains.
5.6.5.1
5.6.5.2
5.6.6.2
5.6.6.3
5.6.6.4
34 5.6.7 Clothes Dryers. 5.6.7.1 General.
5.6.7.2 Electric Clothes Dryers.
5.6.7.3 Exhaust Duct Installation.
5.6.7.4 Fuel-Burning Clothes Dryers.
5.6.7.5 Future Installations.
5.6.7.6 Wiring.
5.6.7.7 Closets or Alcoves.
35 5.6.7.8
5.7 Circulating Air Systems for Heating (Other Than Automotive Type). 5.7.1 Supply System Ducts. 5.7.1.1
5.7.1.2
5.7.1.3
5.7.1.4
5.7.2 Sizing of Supply Ducts. 5.7.2.1
5.7.2.2
5.7.3 Static Pressure.
5.7.4 Return-Air System Air Openings. 5.7.4.1
5.7.4.2
36 5.7.5 Return-Air Duct Materials.
5.7.6 Sizing of Return Air Ducts. 5.7.6.1
5.7.6.2 *
5.7.6.3
5.7.7 Return-Air Duct Unclosable Openings. 5.7.7.1
5.7.7.2
5.7.7.3
5.7.7.4
5.7.7.5
5.7.8 Air Duct Joints and Seams. 5.7.8.1
5.7.8.2
5.7.8.3
5.7.8.4
5.7.9 Air Duct Supports.
37 5.7.10 * Air Duct Registers, Grilles, and Fittings. 5.7.10.1
5.7.10.1.1
5.7.10.2 *
5.7.11 Air Conditioners with Heat Strips or Heat Pumps.
5.8 Consumer Information. 5.8.1 Required Information. 5.8.1.1
5.8.1.2
5.8.1.2.1
38 5.8.1.2.3
39 5.8.1.2.4
5.8.1.2.5
5.8.1.2.6
40 5.8.1.2.7
5.8.1.2.8
41 5.8.2 Required Markings. 5.8.2.1
42 5.8.2.2
5.8.2.2.1
43 5.8.2.3
45 5.8.2.5
46 5.9 Gasoline or Diesel Fuel Systems. 5.9.1 General.
5.9.2 Fuel Tank Construction.
5.9.2.1
5.9.2.2
5.9.3
5.9.3.1 Construction of Metal Liquid Fuel Tanks — Joints.
5.9.3.2 Fittings.
5.9.3.2.1
47 5.9.3.2.2
5.9.3.3 Threads.
5.9.3.4 Safety Venting System.
5.9.3.5 Rollover Vent.
5.9.3.6 Pressure Resistance.
5.9.3.7 Overfill Restriction.
5.9.4 Fill System. 5.9.4.1
5.9.4.2
5.9.4.3
5.9.5 Liquid Fuel Tank Tests. 5.9.5.1
5.9.5.2
5.9.5.3
5.9.5.4
48 5.9.5.5
5.9.6 Fuel Tank Installation. 5.9.6.1
5.9.6.2
5.9.6.3
5.9.6.4
5.9.6.4.1
5.9.6.4.2
5.9.6.4.3
5.9.6.5
5.9.6.6
49 5.9.6.7
5.9.6.8
5.9.7 Filler Pipe. 5.9.7.1
5.9.7.2
5.9.7.3
5.9.7.4 *
5.9.7.5
5.9.7.6
5.9.7.7
5.9.8 Fuel Distribution System. 5.9.8.1 Location.
5.9.8.2
5.9.8.3
5.9.8.4
5.9.8.5
5.9.8.6
5.9.8.7
50 5.9.8.8
5.9.8.9
5.9.8.10
5.9.8.11
5.9.8.12
5.9.8.13
5.9.8.14
5.9.8.15
5.9.9 Fuel-Dispensing Systems. 5.9.9.1
5.9.9.2
5.9.9.3
5.9.9.4
5.9.9.5
5.9.9.6
5.9.10 Fuel-Dispensing Compartments and Enclosures. 5.9.10.1
51 5.9.10.2
5.9.10.3
5.9.10.4
5.9.11 Other Fuel-Dispensing System Requirements. 5.9.11.1
5.9.11.2
5.9.11.3
5.9.11.4
5.9.11.5
5.9.11.6
5.9.11.7
5.9.11.8
5.9.11.9
5.9.11.10
5.9.11.11
5.9.11.12
5.9.11.13
5.9.11.14
52 5.9.11.15
5.9.11.17
5.9.11.18
5.9.12 Testing the Fuel Distribution and/or Dispensing System for Leakage. 5.9.12.1
5.9.12.2
5.9.12.3
5.9.12.4
5.9.12.5
53 5.9.12.6
5.9.12.7
5.9.13 Future Generator Installations.
5.10 Propane Vehicle Propulsion Engine Installations. 5.10.1
5.10.2
5.11 Fuel Cells and Fuel Cell Systems. 5.11.1
5.11.2
5.11.3
5.11.4
5.11.5
Chapter 6 : Fire and Life Safety Provisions
6.1 Interior Finish and Textile or Film Materials. 6.1.1 Interior Finish Flame Spread Limitation.
54 6.1.1.1
6.1.1.1.1
6.1.1.2
6.1.1.3
6.1.2 Combustibility of Tent Fabric, Insect Screening, and Flexible Plastic.
6.1.3 Glazing Materials.
6.2 Recreational Vehicle Means of Escape. 6.2.1 Minimum Means of Escape. 6.2.1.1
6.2.1.2
6.2.1.2.1
6.2.1.3
6.2.1.4
6.2.1.5
55 6.2.1.5.1
6.2.1.6
6.2.2 Secondary Means of Escape. 6.2.2.1
6.2.2.2
6.2.2.3
6.2.2.4
6.2.2.5
6.2.3 Marking of Secondary Means of Escape. 6.2.3.1
6.2.3.2
6.2.3.3
56 6.2.4 Operation of Means of Escape. 6.2.4.1
6.2.4.2
6.2.5 Size of Means of Escape. 6.2.5.1 *
6.2.5.2
6.2.5.3
6.3 Detection Equipment. 6.3.1 Smoke Alarms. 6.3.1.1
6.3.1.2
6.3.1.3 * Smoke Alarm Listing Requirement.
6.3.1.4 Installation of Smoke Alarm.
6.3.1.5 Operational Check Warning Label.
57 6.3.1.6
6.3.2 Carbon Monoxide (CO) Alarms.
6.3.3 Propane Detectors. 6.3.3.1
6.3.3.2
6.4 Other Considerations. 6.4.1 Provisions for Portable Fire Extinguishers. 6.4.1.1
6.4.1.2
6.4.1.3
6.4.2 Liquid Fuel Filler Installation Provisions. 6.4.2.1
6.4.2.2
6.4.3 Combustion Engine Exhausts and Vehicle Wall Openings.
58 6.4.3.1
6.4.3.2
6.4.3.3
6.4.3.4
6.4.3.5
6.4.3.6
6.4.3.7
6.4.3.8
6.4.4 Floor Penetrations for Recreational Vehicles Equipped with or Designed for Future Installation of an InternalCombustion En
6.4.4.2
6.4.5 Installation of Internal Combustion Engine Generators. 6.4.5.1
6.4.5.2
6.4.5.2.1
6.4.5.2.2
6.4.5.2.3
6.4.5.2.4
59 6.4.5.3
6.4.6 Special Transportation Provisions. 6.4.6.1
6.4.6.2
6.4.6.3
6.4.6.3.1
6.4.6.4
6.4.6.4.1
6.4.6.4.2
6.4.6.5
6.4.6.6
6.4.6.7 Internal Combustion Engine Transporting Danger Label. 6.4.6.7.1
6.4.6.7.2
60 6.4.6.8
61 6.4.6.9
62 6.4.6.10
6.4.6.11
6.4.6.12
6.4.6.13
63 6.4.7 Protruding Component Operation. 6.4.7.1
6.4.7.2
6.4.8 Slide-Out Room Activation.
6.4.9 Power Bed Activation.
6.4.10 Power Door Ramp Activation.
6.4.11 Wall Beds (Murphy Beds). 6.4.11.1
6.4.11.2
6.4.11.3
6.5 Automatic Generator Starting System (AGS) Requirements. 6.5.1
6.5.2
6.6 Loft Requirements. 6.6.1 Stairways. 6.6.1.1 Width. 6.6.1.1.1
6.6.1.1.2
6.6.1.2 Treads and Risers. 6.6.1.2.1
64 6.6.1.2.2
6.6.1.3 Uniformity of Treads and Risers.
6.6.2 Handrails. 6.6.2.1
6.6.2.1.1
6.6.2.1.2
6.6.2.1.3
6.6.2.1.4
6.6.2.1.5
6.6.2.1.6
6.6.3 Guardrails. 6.6.3.1
6.6.3.2
6.6.3.3
6.6.3.4
6.6.3.5 Guardrails. 6.6.3.5.1
65 6.6.3.5.2
Chapter 7 : Plumbing Systems
7.1 Plumbing System. 7.1.1 General Requirements. 7.1.1.1
7.1.1.2
7.1.1.3
7.1.2 Components. 7.1.2.1
7.1.2.2
7.1.2.3
7.1.2.4
7.1.2.5
7.1.3 Assembling of Pipe. 7.1.3.1
7.1.3.2
7.1.3.3
7.1.3.4
66 7.1.3.5
7.1.4 Solder Fittings and Joints. 7.1.4.1
7.1.4.2
7.1.4.3
7.1.4.4
7.1.5 Prohibited Practices. 7.1.5.1
7.1.5.2
7.1.5.3
7.1.5.4
7.1.5.5
7.1.6 Protective Requirements. 7.1.6.1
7.1.6.2
7.1.6.3 *
7.1.6.4
7.1.6.5
7.1.6.6
7.1.6.7
67 7.1.6.8
7.2 Plumbing Fixtures. 7.2.1 General Requirements. 7.2.1.1
7.2.1.2
7.2.2 Fixture Connections. 7.2.2.1
7.2.2.2
7.2.2.3
7.2.2.4
7.2.2.5
7.2.2.6
7.2.2.7
7.2.2.8
7.2.2.9
7.2.3 Toilets. 7.2.3.1
7.2.3.2
7.2.3.3
68 7.2.3.4
7.2.3.5
7.2.3.6
7.2.3.7
7.2.3.8
7.2.3.9
7.2.4 Shower Stalls. 7.2.4.1
7.2.4.2
7.2.4.3
7.2.4.4
7.2.4.5
7.2.4.6
7.2.4.7
7.2.4.8
7.3 Water Distribution Systems. 7.3.1 Materials.
7.3.2 Fittings.
69 7.3.2.1
7.3.2.2
7.3.2.3
7.3.2.4
7.3.2.5
7.3.2.6
7.3.3 Prohibited Practices. 7.3.3.1
7.3.3.2
7.3.3.3
7.3.3.4
7.3.4 Demand Pressure Pump Installation. 7.3.4.1
7.3.4.2
7.3.5 Installation of Piping. 7.3.5.1
7.3.5.2
7.3.5.3
7.3.5.4
7.3.5.5
7.3.5.6
70 7.3.5.7
7.3.5.8
7.3.6 Water Supply Requirements. 7.3.6.1
7.3.6.2
7.3.6.3
7.3.6.4
7.3.6.5
7.3.7 Potable Water Storage Tanks.
71 7.3.7.1
7.3.7.2
7.3.7.3
7.3.7.4
7.3.7.5 *
7.3.7.6
7.3.7.7
7.3.8 Water Service Connections, Outlets, and Backflow Prevention. 7.3.8.1
7.3.8.2
7.3.8.3
72 7.3.8.4
7.3.8.5
7.3.8.6
7.3.8.7
7.3.9 Water Outlets. 7.3.9.1
7.3.9.2
7.3.9.3
7.3.9.4
7.3.9.5
7.3.10 Backflow Prevention Device.
7.3.11 Temperature and Pressure Relief Valve. 7.3.11.1
7.3.11.2
7.3.12 Pressure Relief Valve and Drain. 7.3.12.1
7.3.12.2
73 7.3.12.3
7.3.12.4
7.3.13 Air-Pressurized Water Storage Tanks. 7.3.13.1
7.3.13.2
7.4 Drainage Systems. 7.4.1 Pipe and Fittings. 7.4.1.1
7.4.1.2
7.4.1.3
7.4.1.4
7.4.1.5
7.4.1.6
7.4.1.7
7.4.2 Drainage Piping. 7.4.2.1
7.4.2.2
7.4.2.3
7.4.2.4
7.4.2.5
74 7.4.2.6
7.4.3 Connections. 7.4.3.1
7.4.3.2
7.4.3.3
7.4.3.4
7.4.3.5
7.4.3.6
7.4.3.7
7.4.4 Traps. 7.4.4.1
7.4.4.2
7.4.4.3
7.4.4.4
7.4.4.5
7.4.4.6
75 7.4.4.7
7.4.4.8
7.4.4.9
7.4.4.10
7.4.4.11
7.4.4.12 Waterless Trap. 7.4.4.12.1
7.4.4.12.2
7.4.5 Trap Arms. 7.4.5.1
7.4.5.2
7.4.5.3
7.4.5.4
76 7.4.5.5
7.4.6 Wet-Vented Drainage System. 7.4.6.1
7.4.6.2
7.4.6.3
7.4.6.4
7.4.7 Side-Vented Drainage Systems and Flexible Drain Systems. 7.4.7.1
77 7.4.7.1.1
7.4.7.3
7.4.7.4
7.4.7.5
7.4.8 Cleanouts. 7.4.8.1
78 7.4.8.2
7.4.8.3
7.4.8.4
7.4.8.5
7.4.8.6
7.4.8.7
7.5 Waste Holding Tanks. 7.5.1 Location and Securement. 7.5.1.1
7.5.1.2
7.5.1.3
7.5.2 Liquid Waste Holding Tank. 7.5.2.1
7.5.2.2
7.5.2.3
7.5.2.4
7.5.2.5
7.5.3 Body Waste Holding Tank.
79 7.5.3.1
7.5.3.2
7.5.3.3
7.5.3.4
7.5.3.5
7.5.3.6
7.5.3.7 Caution Label. 7.5.3.7.1
7.5.3.7.2
7.5.4 Connections Between Holding Tanks.
80 7.5.5 Operation and Location of Fullway Termination Valves. 7.5.5.1
7.5.5.2
7.5.6 Detachable Waste Holding System.
7.5.7 Drain Outlets. 7.5.7.1
7.5.7.2
7.5.7.3
7.5.7.4
7.5.7.5
7.5.7.6
7.5.7.7
7.5.7.8
7.5.7.9
7.5.7.10
81 7.5.7.11
7.6 Vents and Venting. 7.6.1 General. 7.6.1.1
7.6.1.2
7.6.1.3
7.6.2 Vent Pipe and Fittings. 7.6.2.1
7.6.2.2
7.6.2.3
7.6.2.4
7.6.3 Sizing of Vent Piping. 7.6.3.1
7.6.3.2
7.6.3.3
7.6.3.4
7.6.3.4.1
7.6.4 Flush Toilet Venting. 7.6.4.1
82 7.6.4.2
7.6.5 Horizontal Vents. 7.6.5.1
7.6.5.2
7.6.5.3
7.6.5.4
7.6.6 Anti-Siphon Trap Vent Devices.
7.6.7 Roof Vent Terminations. 7.6.7.1
7.6.7.2
7.6.8 Other Vent Termination Requirements. 7.6.8.1
7.6.8.2
7.6.8.3
7.6.8.4
7.7 Plumbing System Tests.
83 7.7.1 Water Piping System Tests. 7.7.1.1
7.7.1.2
7.7.1.3
7.7.2 Pressurized System Test. 7.7.2.1
7.7.2.1.1
7.7.2.1.2
7.7.2.1.3
7.7.2.2
7.7.2.3
7.7.3 Tests for Drainage and Vent Systems.
7.7.3.1
7.7.3.2
7.7.3.3 Testing Procedures. 7.7.3.3.1
7.7.3.3.2
7.7.3.3.3
84 Chapter 8 : Vehicular Requirements
8.1 Coupling Requirements. 8.1.1 Couplings. 8.1.1.1 *
8.1.1.2
8.1.1.3
8.1.1.4
8.1.1.5
8.1.2 Tongues and A-Frames. 8.1.2.1
8.1.2.2 *
8.1.3 Safety Chains or Cables. 8.1.3.1
8.1.3.2
8.1.3.3
85 8.1.3.4
8.1.3.5
8.1.3.6
8.1.3.7
8.1.3.8
8.2 Truck Campers. 8.2.1 Tie-Downs. 8.2.1.1
8.2.1.2
8.2.2 Lamps and Reflectors. 8.2.2.1
8.2.2.2
8.2.2.3
8.2.2.4
86 8.2.2.5
8.2.2.6
8.3 Vehicular Connections. 8.3.1 General.
8.3.2 Color Coding.
8.3.3 Connections for Electric Brake Systems.
8.3.4 Connections for Nonelectric Brake Systems.
8.3.5 Truck Camper.
8.4 Trailer Running Gear. 8.4.1 General. 8.4.1.1
8.4.1.2
8.4.1.3
87 8.4.1.4 *
8.4.1.5
8.4.1.6
8.4.1.7
88 8.5 Lamps. 8.5.1 General. [© CSA Z240] 8.5.1.1
8.5.1.2
8.5.1.3
8.5.1.4
8.5.2 Installation. 8.5.2.1
8.5.2.2
8.5.2.3
8.5.2.4
8.6 Axle, Tire, and Wheel Assembly Requirements for Towable Recreational Vehicles. 8.6.1
8.6.2 Tire Load Ratings. 8.6.2.1
8.6.2.2
8.6.2.3
89 8.6.2.4
8.6.3
8.6.4
8.7 Steps.
8.8 Exterior Ladder Requirements. 8.8.1 General. 8.8.1.1
8.8.1.2
8.8.1.3
90 Annex A : Explanatory Material
97 Annex B : Propane Pipe Sizing
99 Annex C : Product Listing Standards
101 Annex D : Informational References

Related products

NFPA 1192, Standard on Recreational Vehicles
$54.60