NFPA 122:2010 Edition
$80.71
Standard for Fire Prevention and Control in Metal/Nonmetal Mining and Metal Mineral Processing Facilities
Published By | Publication Date | Number of Pages |
NFPA | 2010 | 46 |
Apply the 2010 NFPA 122 to reduce fatalities and property loss due to fire in underground metal and nonmetal mines and metal mineral processing facilities.
Mining and mineral processing facilities represent significant fire and explosion exposures to both personnel and production equipment and buildings. This critical Standard addresses the protection of diesel-powered equipment and storage and handling of flammable and combustible liquids at these specialized sites.
New in the 2010 NFPA 122: Standard for Fire Prevention and Control in Metal/Nonmetal Mining and Metal Mineral Processing Facilities:
- Revised requirements concerning portable fire extinguishers and fixed suppressions systems to improve operator safety and the reliability of the required suppression systems.
- Complete revision of the chapter on fire prevention and fire protection of surface mining equipment for consistency with fire protection industry practices and the updated provisions in the 2010 NFPA 120: Fire Prevention and Control in Coal Mines.
- New fire protection requirements for new and existing hydro-metallurgical solvent extractions (SX) plants, including a fire risk assessment of the facility and criteria for fixed fire suppressions systems.
- Related additional references and definitions were also added.
PDF Catalog
PDF Pages | PDF Title |
---|---|
2 | Important Notices and Discalimers |
3 | Additional Notices and Disclaimers |
4 | 2.1 General 2.2 NFPA Publications |
8 | Chapter 1 Administration 1.1 Scope 1.2 Purpose 1.3 Application 1.4 Retroactivity |
9 | Chapter 2 Referenced Publications 2.3 Other Publications 2.4 References for Extracts in Mandatory Sections Chapter 3 Definitions 3.1 General 3.2 NFPA Official Definitions |
10 | 3.3 General Definitions |
11 | Chapter 4 General 4.1 General 4.2 Housekeeping 4.3 Ignition Source Control |
12 | 4.4 Hot Work 4.5 Maintenance 4.6 Fire Protection Equipment Inspection, Maintenance, and Testing |
13 | 4.7 Training 4.8 Flammable and Combustible Liquid Handling and Storage 4.9 Vehicle Refueling Chapter 5 Fire Risk Assessment and Risk Reduction 5.1 Fire Risk Assessment 5.2 Risk Reduction |
14 | Chapter 6 Fire Detection and Suppression Equipment 6.1 Portable Fire Extinguishers. 6.2 Hand Hose Line Systems 6.3 Fire Detection 6.4 Fire Suppression Equipment Chapter 7 Fire Protection for Diesel-Powered Equipment in Underground Mines 7.1 Equipment Modification 7.2 Equipment Inspection and Maintenance 7.3 Portable Fire Extinguishers |
15 | 7.4 Fixed Suppression Systems Chapter 8 Transfer of Flammable or Combustible Liquids in Underground Mines 8.1 Fire Risk Assessment 8.2 Proximity of Surface Flammable and Combustible Liquid Storage to Underground Openings 8.3 Surface-to-Underground Transfer 8.4 Underground Transfer Chapter 9 Flammable Liquid Storage in Underground Mines 9.1 General |
16 | 9.2 Flammable Liquid Containers 9.3 Small Flammable Liquid Storage Areas 9.4 Large Flammable Liquid Storage Areas |
17 | 9.5 Dispensing Flammable Liquids Chapter 10 Combustible Liquid Storage in Underground Mines 10.1 General 10.2 Combustible Liquid Containers and Tanks 10.3 Atmospheric Tanks 10.4 Low-Pressure Tanks 10.5 Pressure Vessels 10.6 Venting Atmospheric and Low-Pressure Combustible Liquid Storage Tanks 10.7 Additional Considerations |
18 | 10.8 Small Combustible Liquid Storage Areas 10.9 Large Combustible Liquid Storage Areas |
19 | 10.10 Dispensing Combustible Liquids Chapter 11 Fire Suppression for Flammable or Combustible Liquid Storage Areas in Underground Mines 11.1 Portable Fire Extinguishers 11.2 Hand Hose Line Systems 11.3 Fire Suppression Systems Chapter 12 Fire Prevention and Fire Protection of Surface Mining Equipment 12.1 General |
20 | 12.2 Fire Prevention 12.3 Fire Protection |
22 | Chapter 13 Fire Protection of Surface Metal Mineral Processing Plants 13.1 General 13.2 Emergency Response and Manual Fire Fighting |
23 | 13.3 Construction 13.4 Lightning Protection 13.5 Egress and Exiting 13.6 Yard Hydrant Systems 13.7 Water Supply and Water Distribution Systems 13.8 Flammable and Combustible Liquids 13.9 Compressed Gases 13.10 Rubber and Plastic Lined Equipment 13.11 Plastic Equipment 13.12 Belt Conveyors |
24 | 13.13 Hydraulic Fluids and Lubricating Oil Systems 13.14 Thermal Oil Heating Systems 13.15 Fuel-Fired Equipment 13.16 Electrical Equipment Spaces 13.17 Battery Charging Installations 13.18 Hydro-Metallurgical Solvent Extraction (SX) Facilities |
25 | 13.19 New Solvent Extraction (SX) Facilities. |
26 | Annex A Explanatory Material |
35 | Annex B Fire Risk Assessment |
39 | Annex C Informational References |
41 | Index |