NFPA 14:2010 Edition

$80.71

Standard for the Installation of Standpipe and Hose Systems

Published By	Publication Date	Number of Pages
NFPA	2010	46

Guaranteed Safe Checkout

Category: NFPA

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

Use the revised best practices for standpipe systems in NFPA 14.

Follow the updated rules in the 2010 NFPA 14: Standard for the Installation of Standpipe and Hose Systems and improve fire protection and fire safety. The 2010 edition includes important changes for system designers and installers, including:

New requirements permitting express mains supplying higher zone standpipes to be designed with pressures in excess of 350 psi (24 bar) in accordance with their materials listings or as approved by the AHJ.
Clarified requirements regarding standpipe system zones
New requirements concerning standpipe systems with risers that terminate at different floor levels
New and revised definitions for standpipe, horizontal standpipe, and express main

This widely used document is essential for system designers and installers and also important for insurance professionals, AHJs, and others.

PDF Catalog

PDF Pages	PDF Title
2	Important Notices and Disclaimers Important Notices and Disclaimers
3	Additional Notices and Disclaimers Additional Notices and Disclaimers
4	2.1 General 2.1 General 2.2 NFPA Publications 2.2 NFPA Publications
7	Chapter 1 Administration Chapter 1 Administration 1.1 Scope 1.1 Scope 1.2 Purpose 1.2 Purpose 1.3 Retroactivity 1.3 Retroactivity 1.4 Equivalency 1.4 Equivalency 1.5 Units 1.5 Units Chapter 2 Referenced Publications Chapter 2 Referenced Publications
8	2.3 Other Publications 2.3 Other Publications 2.4 References for Extracts in Mandatory Sections 2.4 References for Extracts in Mandatory Sections Chapter 3 Definitions Chapter 3 Definitions 3.1 General 3.1 General 3.2 NFPA Official Definitions 3.2 NFPA Official Definitions
9	3.3 General Definitions 3.3 General Definitions
10	Chapter 4 System Components and Hardware Chapter 4 System Components and Hardware 4.1 General 4.1 General 4.2 Pipe and Tube 4.2 Pipe and Tube
11	4.3 Fittings 4.3 Fittings 4.4 Joining of Pipe and Fittings 4.4 Joining of Pipe and Fittings
13	4.5 Valves 4.5 Valves 4.6 Hose Stations 4.6 Hose Stations 4.7 Hose Connections 4.7 Hose Connections 4.8 Fire Department Connections 4.8 Fire Department Connections
14	4.9 Pressure-Regulating Devices 4.9 Pressure-Regulating Devices 4.10 Signs 4.10 Signs Chapter 5 System Requirements Chapter 5 System Requirements 5.1 General 5.1 General 5.2 Automatic and Semiautomatic Dry Systems 5.2 Automatic and Semiautomatic Dry Systems
15	5.3 Classes of Standpipe Systems 5.3 Classes of Standpipe Systems 5.4 Required Type of System 5.4 Required Type of System
16	5.5 Gauges 5.5 Gauges 5.6 Waterflow and Supervisory Alarms 5.6 Waterflow and Supervisory Alarms Chapter 6 Installation Requirements Chapter 6 Installation Requirements 6.1 Location and Protection of Piping 6.1 Location and Protection of Piping 6.2 Underground Piping 6.2 Underground Piping 6.3 Gate Valves and Check Valves 6.3 Gate Valves and Check Valves
17	6.4 Fire Department Connections 6.4 Fire Department Connections
18	6.5 Support of Piping 6.5 Support of Piping 6.6 Installation of Signs 6.6 Installation of Signs 6.7 Signs for Water Supply Pumps 6.7 Signs for Water Supply Pumps 6.8 Hydraulic Design Information Sign 6.8 Hydraulic Design Information Sign Chapter 7 Design Chapter 7 Design 7.1 General 7.1 General 7.2 Pressure Limitation 7.2 Pressure Limitation
19	7.3 Locations of Hose Connections 7.3 Locations of Hose Connections 7.4 Number of Standpipes 7.4 Number of Standpipes 7.5 Interconnection of Standpipes 7.5 Interconnection of Standpipes 7.6 Minimum Sizes for Standpipes and Branch Lines 7.6 Minimum Sizes for Standpipes and Branch Lines 7.7 System Design and Sizing of Pipe for Delivery of System Demand 7.7 System Design and Sizing of Pipe for Delivery of System Demand 7.8 Minimum and Maximum Pressure Limits 7.8 Minimum and Maximum Pressure Limits
20	7.9 Standpipe System Zones 7.9 Standpipe System Zones 7.10 Flow Rates 7.10 Flow Rates
21	7.11 Drains and Test Riser 7.11 Drains and Test Riser 7.12 Fire Department Connections 7.12 Fire Department Connections Chapter 8 Plans and Calculations Chapter 8 Plans and Calculations 8.1 Plans and Specifications 8.1 Plans and Specifications
22	8.2 Hydraulic Calculations 8.2 Hydraulic Calculations 8.3 Hydraulic Calculation Procedures 8.3 Hydraulic Calculation Procedures
23	Chapter 9 Water Supply Chapter 9 Water Supply 9.1 Required Water Supply 9.1 Required Water Supply
24	9.2 Minimum Supply for Class I and Class III Systems 9.2 Minimum Supply for Class I and Class III Systems 9.3 Minimum Supply for Class II Systems 9.3 Minimum Supply for Class II Systems Chapter 10 Water Supply Testing Chapter 10 Water Supply Testing 10.1 Water Supply Evaluation 10.1 Water Supply Evaluation 10.2 Procedure 10.2 Procedure Chapter 11 System Acceptance Chapter 11 System Acceptance 11.1 General 11.1 General 11.2 Flushing of Piping 11.2 Flushing of Piping 11.3 Hose Threads 11.3 Hose Threads 11.4 Hydrostatic Tests 11.4 Hydrostatic Tests 11.5 Flow Tests 11.5 Flow Tests
30	11.6 Manual Valve Test 11.6 Manual Valve Test 11.7 Alarm and Supervision Tests 11.7 Alarm and Supervision Tests 11.8 Instructions 11.8 Instructions 11.9 Signs 11.9 Signs Chapter 12 Buildings Under Construction Chapter 12 Buildings Under Construction 12.1 General 12.1 General 12.2 Fire Department Connections 12.2 Fire Department Connections 12.3 Other System Features 12.3 Other System Features 12.4 Support of Piping 12.4 Support of Piping 12.5 Hose Connections 12.5 Hose Connections 12.6 Extension of System Piping 12.6 Extension of System Piping 12.7 Temporary Installations 12.7 Temporary Installations 12.8 Timing of Water Supply Installation 12.8 Timing of Water Supply Installation 12.9 Protection of Hose Connections and Fire Department Connections 12.9 Protection of Hose Connections and Fire Department Connections
31	Chapter 13 System Testing, Inspection, and Maintenance Chapter 13 System Testing, Inspection, and Maintenance 13.1 General 13.1 General Annex A Explanatory Material Annex A Explanatory Material
40	Annex B Informational References Annex B Informational References
41	Index Index