🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
NFPA 1953, Standard on Protective Ensembles for Contaminated Water Diving:2021 Edition

NFPA 1953, Standard on Protective Ensembles for Contaminated Water Diving:2021 Edition

$52.65

NFPA 1953, Standard on Protective Ensembles for Contaminated Water Diving

Published By Publication Date Number of Pages
NFPA 2021
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

PDF Catalog

PDF Pages PDF Title
1 Copyright
Edition
Origin and Development
2 Committee Lists for NFPA-1953-2021
8 Chapter 1 : Administration
1.1 * Scope. 1.1.1 *
9 1.1.2 *
1.1.3
1.1.4 *
1.1.5 *
1.1.6
1.1.7
1.1.8
1.1.9
1.2 Purpose. 1.2.1 *
1.2.2 *
1.2.3 *
1.3 Application.
10 1.3.1
1.3.2
1.3.3
1.3.4
1.3.5
1.3.6
1.3.7
1.3.8 *
1.4 * Units. 1.4.1
1.4.2
Chapter 2 : Referenced Publications
2.1 General.
2.2 NFPA Publications.
11 2.3 Other Publications. 2.3.1 AATCC Publications.
2.3.2 ASTM Publications.
2.3.3 CAN/CGSB Publications.
12 2.3.4 ISO Publications.
2.3.5 UL Publications.
2.3.6 US Government Publications.
2.3.7 Other Publications.
2.4 References for Extracts in Mandatory Sections. (Reserved)
Chapter 3 : Definitions
3.1 General.
3.2 NFPA Official Definitions. 3.2.1 * Approved.
3.2.2 * Authority Having Jurisdiction (AHJ).
13 3.2.3 Labeled.
3.2.4 * Listed.
3.2.5 Shall.
3.2.6 Should.
3.2.7 Standard.
3.3 General Definitions. 3.3.1 Bootie.
3.3.2 Certification/Certified.
3.3.3 Closure.
3.3.4 Compliance/Compliant.
3.3.5 Compliant Product.
3.3.6 Component(s).
3.3.7 Composite.
3.3.8 Contaminated Water.
3.3.9 Diving Helmet.
14 3.3.10 Dry Suit.
3.3.10.1
3.3.10.2 *
3.3.10.3
3.3.11 Exhaust Valve.
3.3.12 Follow-Up Program.
3.3.13 Full-Face Diving Mask.
3.3.14 Glove.
3.3.15 Hardware.
3.3.16 Inlet Valve.
3.3.17 Manufacturer.
3.3.18 Manufacturing Facility.
3.3.19 Model.
3.3.20 * Moderate Contamination.
3.3.21 Neck Seal.
3.3.22 Penetration.
3.3.23 * Permeation.
15 3.3.24 Product.
3.3.25 Product Label.
3.3.26 Reinforcement.
3.3.27 Retroreflection/Retroreflective.
3.3.28 Sample.
3.3.29 Seam.
3.3.30 * Severe Contamination.
3.3.31 Specimen.
3.3.32 Suit.
3.3.33 Suit Material.
3.3.34 Trim.
3.3.35 Visibility Markings.
3.3.36 Wrist Seal.
Chapter 4 : Certification
4.1 General. 4.1.1
4.1.2
16 4.1.3
4.1.4 *
4.1.5
4.1.6
4.1.7
4.1.8
4.1.9
4.1.10
4.1.11
4.2 Certification Program. 4.2.1 *
4.2.2
4.2.3
4.2.4
17 4.2.5 *
4.2.5.1
4.2.5.2
4.2.6 *
4.2.6.1
4.2.6.2
4.2.7
4.2.7.1 *
4.2.7.2
4.2.8
4.2.9 *
4.2.9.1
4.2.9.2
4.2.9.3
4.2.9.4
18 4.2.10
4.2.11
4.2.12
4.3 Inspection and Testing. 4.3.1
4.3.2
4.3.2.1
4.3.2.2
4.3.3
4.3.3.1
4.3.3.2
4.3.3.3
4.3.3.4
4.3.3.5
4.3.4
19 4.3.5
4.3.6
4.3.7
4.3.8
4.3.9
4.3.9.1
4.3.9.2
4.3.10
4.3.11
4.3.12
4.3.13
4.3.14
4.3.15
4.3.16
20 4.4 Annual Verification of Product Compliance. 4.4.1
24 4.4.1.1
4.4.1.2
4.4.1.3
4.4.2
4.4.3
4.4.4
25 4.4.5
4.5 Manufacturers’ Quality Assurance Program. 4.5.1
4.5.2
4.5.3
4.5.3.1
4.5.3.2
4.5.3.3
4.5.4 *
4.5.5 *
4.6 Hazards Involving Compliant Product. 4.6.1
4.6.2 *
4.6.3
4.6.4
26 4.6.5
4.6.6
4.6.7
4.6.8
4.6.9
4.6.10
4.6.11 *
4.6.12
4.6.13
4.7 Manufacturers’ Investigation of Complaints and Returns. 4.7.1
4.7.2
27 4.7.3
4.8 Manufacturers’ Safety Alert and Product Recall Systems. 4.8.1
4.8.2
Chapter 5 : Labeling and Information
5.1 Product Label Requirements. 5.1.1 *
5.1.1.1
5.1.1.2
5.1.1.3
5.1.1.4
5.1.2
28 5.1.3 *
5.1.4
5.1.5
5.1.6
5.1.7
5.1.8
5.1.9
29 5.1.10
5.2 User Information. 5.2.1
5.2.2
5.2.3
5.2.4 *
30 Chapter 6 : Design Requirements
6.1 Contaminated Water Diving Operations Protective Dry Suit Design Requirements. 6.1.1
6.1.2 *
6.1.3
6.1.4
6.1.5 *
6.1.5.1
6.1.5.2
6.1.6
6.1.7 *
6.1.8
6.1.9
6.1.10
6.1.11
6.1.12
31 6.1.13
6.1.13.1
6.1.14
6.1.14.1
6.1.14.2
6.1.15 Visibility Markings.
6.1.16 *
6.2 Contaminated Water Diving Operations Protective Dry Suit Glove Design Requirements. 6.2.1
6.2.2
6.2.3
6.2.4
6.2.5
6.2.6
32 6.3 Contaminated Water Diving Operations Protective Dry Suit Footwear Design Requirements. 6.3.1
6.3.2
6.3.3
Chapter 7 : Performance Requirements
7.1 Contaminated Water Diving Operations Protective Dry Suit Ensemble Performance Requirements. 7.1.1
7.1.2
7.1.3
7.1.4
7.1.5
7.1.5.1
7.1.5.2
7.1.5.3
7.1.6
7.1.7
33 7.1.8
7.1.9
7.1.10
7.1.11
7.1.12
7.1.13
7.1.14
7.1.15
7.1.16
7.1.17
7.1.18
7.1.19
7.1.19.1
7.1.19.2
7.1.20
34 7.1.21 Contaminated Water Diving Operations Protective Dry Suit Optional CBRN Protection PerformanceRequirements. 7.1.21.1
7.2 Contaminated Water Diving Operations Protective Dry Suit Glove Elements. 7.2.1
7.2.2
7.2.3
7.2.4
7.2.5
7.2.6
7.2.7
7.2.8
35 7.2.9 Contaminated Water Diving Operations Protective Dry Suit Glove Elements Optional CBRN ProtectionPerformance Requirements.
7.3 Contaminated Water Diving Operations Protective Dry Suit Footwear Elements. 7.3.1 Attached Footwear. 7.3.1.1
7.3.1.2
7.3.1.3
7.3.1.4
7.3.1.5
7.3.1.6
7.3.1.7
7.3.1.8
36 7.3.1.9
7.3.1.10
7.3.2 Attached Integrated Bootie with Overboot. 7.3.2.1
7.3.2.2
7.3.2.3
7.3.2.4
7.3.2.5
7.3.2.6
7.3.2.7
7.3.2.8
7.3.2.9
7.3.2.10
7.3.2.11
37 7.3.2.12 Contaminated Water Diving Operations Protective Dry Suit Footwear Elements Optional CBRNProtection Performance Requirem
Chapter 8 : Test Methods
8.1 Sample Preparation Procedures. 8.1.1 Application. 8.1.1.1
8.1.1.2
8.1.2 Room Temperature Conditioning Procedure. 8.1.2.1
8.1.2.2
8.1.3 Washing and Drying Procedure. 8.1.3.1
8.1.3.2
8.1.3.3
38 8.1.3.4
8.1.3.5
8.1.4 Flexural Fatigue Procedure. 8.1.4.1
8.1.4.2
8.1.5 Abrasion Procedure.
39 8.1.6 Wet Conditioning Procedure for Whole Gloves. 8.1.6.1
8.1.6.2
8.1.6.3
40 8.1.6.4
8.1.7 Conditioning Procedure for Dry Suit Closure Assemblies.
8.2 Air Retention Test. 8.2.1 Application.
8.2.2 Samples. 8.2.2.1
8.2.2.2
8.2.3 Specimens.
8.2.4 Procedure.
8.2.5 Report.
8.2.6 Interpretation.
8.3 Exhaust Valve Inward Leakage Test. 8.3.1 Application.
8.3.2 Sample Preparation. 8.3.2.1
8.3.2.2
8.3.3 Specimens. 8.3.3.1
41 8.3.3.2
8.3.4 Test Apparatus. 8.3.4.1
8.3.5 Procedure. 8.3.5.1
8.3.5.2
8.3.5.3
8.3.6 Report. 8.3.6.1
8.3.6.2
8.3.7 Interpretation.
8.4 Inlet Valve Pull Test. 8.4.1 Application.
8.4.2 Sample Preparation.
8.4.3 Specimens.
8.4.4 Procedure.
42 8.4.4.1
8.4.4.2
8.4.4.3
8.4.4.4
8.4.5 Report.
8.4.6 Interpretation.
8.5 Burst Strength Test. 8.5.1 Application. 8.5.1.1
8.5.1.2
8.5.2 Sample Preparation. 8.5.2.1
8.5.2.2
8.5.3 Specimens. 8.5.3.1
8.5.3.2
8.5.3.3
8.5.4 Procedure.
8.5.5 Report. 8.5.5.1
43 8.5.5.2
8.5.6 Interpretation.
8.6 Puncture Propagation Tear Resistance Test. 8.6.1 Application.
8.6.2 Samples. 8.6.2.1
8.6.2.2
8.6.3 Specimens. 8.6.3.1
8.6.3.2
8.6.3.3
8.6.4 Procedure.
8.6.5 Report. 8.6.5.1
8.6.5.2
8.6.6 Interpretation. 8.6.6.1
8.6.6.2
8.7 Seam Breaking Strength Test.
44 8.7.1 Application.
8.7.2 Samples. 8.7.2.1
8.7.2.2
8.7.3 Specimens. 8.7.3.1
8.7.3.2
8.7.3.3
8.7.4 Procedure.
8.7.5 Report. 8.7.5.1
8.7.5.2
8.7.5.3
8.7.6 Interpretation.
8.8 Chemical Permeation Resistance Test. 8.8.1 Application. 8.8.1.1
8.8.1.2
8.8.1.3
45 8.8.1.4
8.8.1.5
8.8.2 Sample Preparation. 8.8.2.1
8.8.2.2
8.8.3 Specimens. 8.8.3.1
8.8.3.2
8.8.4 Procedure. 8.8.4.1
8.8.4.2 *
8.8.4.3
8.8.4.4
8.8.5 Report.
46 8.8.5.1
8.8.5.1.1
8.8.5.2
8.8.5.2.1
8.8.5.2.2
8.8.5.3
8.8.6 Interpretation.
8.8.7 Specific Requirements for Testing Dry Suit, Dry Suit Hood, and Dry Suit Attached Integrated BootieMaterials. 8.8.7.1
8.8.7.2
8.8.7.3
8.8.7.3.1
8.8.7.3.2
8.8.7.4
8.8.7.5
8.8.7.6
47 8.8.7.7
8.8.7.8
8.8.7.9
8.8.8 Specific Requirements for Testing Dry Suit, Dry Suit Hood, and Dry Suit Attached Integrated Bootie Seams. 8.8.8.1
8.8.8.2
8.8.8.3
8.8.8.3.1
8.8.8.3.2
8.8.8.4
8.8.8.5
8.8.8.6
8.8.9 Specific Requirements for Testing Dry Suit Glove Materials and Seams. 8.8.9.1
8.8.9.2
8.8.9.3
8.8.9.4
48 8.8.9.5
8.8.10 Specific Requirements for Testing Dry Suit Attached Integrated Boot Materials. 8.8.10.1
8.8.10.2
8.8.10.3
8.8.10.4
8.8.10.5
8.8.10.6
8.8.10.7
8.9 CBRN Permeation Resistance Test. 8.9.1 Application. 8.9.1.1
8.9.1.2
8.9.2 Conditioning of Samples and Specimens. 8.9.2.1
8.9.3 Apparatus. 8.9.3.1
8.9.3.2
53 8.9.3.3
8.9.3.4
8.9.3.5
8.9.3.6
8.9.4 Supplies. 8.9.4.1
8.9.4.2
54 8.9.4.2.1
8.9.4.2.2
8.9.4.3
8.9.5 Chemicals. 8.9.5.1
8.9.5.2 Process for Determining the Mass of Liquid Chemical Challenge Applied. 8.9.5.2.1
8.9.5.2.2
8.9.5.2.3
8.9.5.2.4
8.9.5.2.5
8.9.5.2.6
8.9.5.2.7
8.9.5.2.8
8.9.5.3
55 8.9.6 Procedures. 8.9.6.1 Preconditioning. 8.9.6.1.1
8.9.6.2 Test Cell Assembly. 8.9.6.2.1
8.9.6.2.2
8.9.6.2.3
8.9.6.2.4
8.9.6.2.5
8.9.6.2.6
8.9.6.2.7
8.9.6.2.8
8.9.6.2.9
8.9.6.2.10
8.9.6.2.11
8.9.6.3 Verification of Test Cell Integrity. 8.9.6.3.1
8.9.6.3.2
56 8.9.6.3.3
8.9.6.3.4
8.9.6.3.5
8.9.6.3.6
8.9.6.4 Determination of Procedure for Applying Liquid Challenge Chemicals. 8.9.6.4.1
8.9.6.4.2
8.9.6.4.3
8.9.6.4.4
8.9.6.5 Procedure for Liquid Chemical Challenge. 8.9.6.5.1
8.9.6.5.2
8.9.6.5.3
8.9.6.5.4
8.9.6.5.5
8.9.6.5.6
8.9.6.5.7
57 8.9.6.5.7.1
8.9.6.5.7.2
8.9.6.5.8
8.9.6.5.9
8.9.6.5.10
8.9.6.5.11
8.9.6.5.12
8.9.6.6 Procedure for Gas or Vapor Challenge Chemicals. 8.9.6.6.1
8.9.6.6.2
8.9.6.6.3
8.9.6.6.4
8.9.6.6.4.1
8.9.6.6.4.2
8.9.6.6.4.3
8.9.6.6.4.4
8.9.6.6.5
8.9.6.7
58 8.9.6.8
8.9.6.9
8.9.6.10
8.9.7 Test Conclusion, Test Cell Cleaned, and Specimen Disposal. 8.9.7.1
8.9.7.2
8.9.7.3
8.9.7.4
8.9.7.5
8.9.7.6
8.9.8 Report. 8.9.8.1
8.9.8.1.1
8.9.8.1.2
8.9.8.1.3
8.9.8.1.4
8.9.8.2
8.9.9 Interpretation.
59 8.10 Viral Penetration Resistance Test. 8.10.1 Application. 8.10.1.1
8.10.1.2
8.10.1.3
8.10.2 Samples.
8.10.2.1
8.10.3 Specimens. 8.10.3.1
8.10.3.2
8.10.3.3
8.10.4 Procedure. 8.10.4.1
8.10.4.2
8.10.5 Report.
8.10.6 Interpretation.
8.10.7 Specific Requirements for Testing Suit, Hood, and Attached Integrated Bootie Materials.
8.10.8 Specific Requirements for Testing Glove Materials. 8.10.8.1
8.10.8.2
60 8.10.8.2.1
8.10.8.3
8.10.8.4
8.10.9 Specific Requirements for Testing Footwear Materials.
8.11 Cut Resistance Test. 8.11.1 Application. 8.11.1.1
8.11.1.2
8.11.1.3
8.11.1.4
8.11.2 Samples.
8.11.3 Specimens.
8.11.4 Procedure.
8.11.5 Report. 8.11.5.1
8.11.5.2
8.11.6 Interpretation.
61 8.11.7 Specific Requirements for Testing Glove Materials. 8.11.7.1
8.11.7.2
8.11.7.3
8.11.7.4
8.11.8 Specific Requirements for Testing Attached Integrated Boots Upper Materials. 8.11.8.1
8.11.8.2
8.11.8.3
8.12 Abrasion Resistance Test One. 8.12.1 Application. 8.12.1.1
8.12.2 Samples. 8.12.2.1
8.12.2.2
8.12.3 Specimens. 8.12.3.1
8.12.3.2
8.12.3.3
8.12.4 Procedure. 8.12.4.1
62 8.12.4.2
8.12.5 Report. 8.12.5.1
8.12.5.2
8.12.5.3
8.12.5.4
8.12.6 Interpretation. 8.12.6.1
8.12.6.2
8.13 Zipper Strength Test. 8.13.1 Application.
8.13.2 Samples.
8.13.3 Specimens.
8.13.4 Procedure.
8.13.5 Report. 8.13.5.1
63 8.13.5.2
8.13.6 Interpretation. 8.13.6.1
8.13.6.2
8.14 Resistance to Twist of Pull and Slider Test. 8.14.1 Application.
8.14.2 Samples.
8.14.3 Specimens.
8.14.4 Procedure.
8.14.5 Report.
8.14.6 Interpretation. 8.14.6.1
8.14.6.2
8.15 Opening and Closing of Zippers Test. 8.15.1 Application.
8.15.2 Samples.
8.15.3 Specimens.
8.15.4 Procedure.
64 8.15.5 Report. 8.15.5.1
8.15.5.2
8.15.6 Interpretation. 8.15.6.1
8.15.6.2
8.16 Zipper Point Breaking Strength Test. 8.16.1 Application.
8.16.2 Samples. 8.16.2.1
8.16.2.2
8.16.3 Specimens.
8.16.4
8.16.5 Report. 8.16.5.1
8.16.5.2
8.16.6 Interpretation. 8.16.6.1
8.16.6.2
8.17 Retroreflectivity Test. 8.17.1 Application.
65 8.17.1.1
8.17.1.2
8.17.2 Samples. 8.17.2.1
8.17.2.2
8.17.3 Specimens. 8.17.3.1
8.17.3.2
8.17.3.3
8.17.4 Procedures for Measurement of Coefficient of Retroreflection. 8.17.4.1
8.17.4.2
8.17.4.3
66 8.18 Corrosion Resistance Test. 8.18.1 Application. 8.18.1.1
8.18.2 Samples.
8.18.3 Specimens.
8.18.4 Procedure. 8.18.4.1
8.18.4.2
8.18.4.3
8.18.4.4
8.18.5 Report.
8.18.6 Interpretation.
8.18.7 Specific Requirements for Testing Suit, Glove, and Footwear Hardware. 8.18.7.1
8.18.7.2
8.19 Label Durability and Legibility Test. 8.19.1 Application. 8.19.1.1
8.19.1.2
8.19.1.3
8.19.1.4
67 8.19.2 Samples.
8.19.3 Specimens. 8.19.3.1
8.19.3.2
8.19.4 Procedures. 8.19.4.1 Laundering Durability Test. 8.19.4.1.1
8.19.4.1.2
8.19.4.1.3
8.19.4.2 Abrasion Durability Test. 8.19.4.2.1
8.19.4.2.2
8.19.5 Report.
8.19.6 Interpretation.
8.19.7 Specific Requirements for Testing Dry Suit and Hood Labels. 8.19.7.1
8.19.7.2
8.19.7.3
68 8.19.7.4
8.19.8 Specific Requirements for Testing Protective Glove Labels. 8.19.8.1
8.19.8.2
8.19.8.3
8.19.9 Specific Requirements for Testing Protective Attached Integrated Boot Labels. 8.19.9.1
8.19.9.2
8.19.9.3
8.20 Puncture Resistance Test. 8.20.1 Application. 8.20.1.1
8.20.1.2
8.20.1.3
8.20.1.4
8.20.2 Samples.
8.20.3 Specimens. 8.20.3.1
8.20.3.2
8.20.4 Procedure.
69 8.20.5 Report. 8.20.5.1
8.20.5.2
8.20.6 Interpretation.
8.20.7 Specific Requirements for Testing Glove Materials. 8.20.7.1
8.20.7.2
8.20.7.3
8.20.8 Specific Requirements for Testing Protective Footwear Upper Materials. 8.20.8.1
8.20.8.2
8.20.9 Specific Requirements for Testing Protective Footwear Soles. 8.20.9.1
8.20.9.2
8.21 Abrasion Resistance Test Two. 8.21.1 Application. 8.21.1.1
8.21.1.2
8.21.1.3
8.21.1.4
8.21.2 Samples.
70 8.21.2.1
8.21.2.2
8.21.3 Specimens. 8.21.3.1
8.21.3.2
8.21.3.3
8.21.4 Procedure. 8.21.4.1
8.21.4.2
8.21.5 Report.
8.21.6 Interpretation.
8.21.7 Requirements for Testing Protective Glove Composites. 8.21.7.1
8.21.7.2
8.21.8 Requirements for Testing Protective Footwear Upper Materials. 8.21.8.1
8.21.8.2
8.21.8.3
8.21.9 Requirements for Testing Protective Footwear Soles. 8.21.9.1
71 8.21.9.2
8.21.9.3
8.21.9.4
8.22 Torque Test. 8.22.1 Application.
8.22.2 Samples. 8.22.2.1
8.22.2.2
8.22.3 Specimens. 8.22.3.1
8.22.3.2
8.22.3.3
8.22.3.4
8.22.3.5
8.22.4 Apparatus. 8.22.4.1
8.22.5 Procedure. 8.22.5.1
8.22.5.2
72 8.22.5.3
8.22.5.4
8.22.5.5
8.22.5.6
8.22.5.7
8.22.5.8
8.22.6 Report.
8.22.7 Interpretation. 8.22.7.1
8.22.7.2
8.23 Slip Resistance. 8.23.1 Application.
8.23.2 Samples. 8.23.2.1
8.23.2.2
73 8.23.3 Specimens. 8.23.3.1
8.23.3.2
8.23.4 Procedure.
8.23.4.1
8.23.4.2
8.23.4.3
8.23.5 Report. 8.23.5.1
8.23.5.2
8.23.6 Interpretation.
8.24 Footwear Drainage Test. 8.24.1 Application.
8.24.2 Samples. 8.24.2.1
8.24.2.2
8.24.3 Specimens.
8.24.4 Procedure. 8.24.4.1
8.24.4.2
74 8.24.4.3
8.24.4.4
8.24.4.5
8.24.5 Report. 8.24.5.1
8.24.5.2
8.24.5.3
8.24.6 Interpretation. 8.24.6.1
8.24.6.2
8.25 Chemical Degradation Resistance Test for Exhaust Valves. 8.25.1 Application.
8.25.2 Sample Preparation. 8.25.2.1
8.25.2.2
8.25.3 Specimens.
8.25.4 Apparatus. 8.25.4.1
75 8.25.5 Procedures. 8.25.5.1
8.25.5.2
8.25.5.3
8.25.5.4
8.25.5.5
8.25.5.6
8.25.5.7
8.25.5.8
8.25.6 Report. 8.25.6.1
8.25.6.2
8.25.7 Interpretation.
76 8.26 Hood to Full-Face Diving Mask Seal Test. 8.26.1 Application.
8.26.2 Specimens. 8.26.2.1
8.26.2.2
8.26.2.3
8.26.2.4
8.26.3 Procedure.
8.26.3.1
8.26.3.2
8.26.4 Report.
8.26.5 Interpretation.
8.27 Diving Helmet Seal Test. 8.27.1 Application.
8.27.2 Specimens. 8.27.2.1
77 8.27.2.2
8.27.2.3
8.27.3 Procedure.
8.27.3.1
8.27.3.2
8.27.4 Report.
8.27.5 Interpretation.
8.28 Chemical Penetration Resistance Test. 8.28.1 Application.
8.28.2 Sample Preparation. 8.28.2.1
8.28.2.2
8.28.3 Specimens. 8.28.3.1
8.28.3.2
8.28.4 Procedure.
78 8.28.4.1
8.28.4.2 *
8.28.4.3 *
8.28.4.4
8.28.4.5
8.28.5 Report. 8.28.5.1
8.28.5.2
8.28.6 Interpretation.
79 8.29 Abrasion Resistance Test Three. 8.29.1 Application.
8.29.2 Samples. 8.29.2.1
8.29.2.2
8.29.3 Specimens. 8.29.3.1
8.29.3.2
8.29.4 Procedure. 8.29.4.1
8.29.4.2
8.29.5 Report. 8.29.5.1
8.29.5.2
8.29.5.3
8.29.6 Interpretation.
Annex A : Explanatory Material
85 Annex B : Informational References

Related products

NFPA 1953, Standard on Protective Ensembles for Contaminated Water Diving
$52.65