NFPA Hdbk 13 10:2010 Edition
$150.58
NFPA 13: Automatic Sprinkler Systems Handbook
Published By | Publication Date | Number of Pages |
NFPA | 2010 | 1092 |
Dynamic, insightful, and loaded with new research, the Automatic Sprinkler Systems Handbook helps you solve sprinkler challenges.
NFPA® teamed up with leading fire protection experts to create a one-stop source for everything you need to know about sprinklers systems. The 2010 edition of NFPA 13 is current with the latest sprinkler technology, delivering scientifically-based solutions that reduce risks and fire loss — and only the Automatic Sprinkler Systems Handbook contains detailed explanations of NFPA 13 rules, real-world visuals, and a wealth of “extra” material not in the Standard itself.
No other sprinkler reference combines:
- The complete text of the 2010 NFPA 13: Standard for the Installation of Sprinkler Systems — including all tables and charts.
- Exclusive commentary that clarifies NFPA 13’s intent and rationale, including advice on applying major changes, such as the new method to calculate rack shelf area that takes the placement of loads into consideration.
- Photos and graphics depicting scenarios and equipment, such as assemblies for three new special storage arrangements covered in the expanded Chapter 20. Diagrams illustrate proper piping and joint restraints.
- FAQs highlighting key concepts and the reasons behind them.
- New in this edition: Three exclusive Supplements explore emerging sprinkler research and report on the latest U.S. and international experience.
- A web address links you to more information, such as a previous Supplement on MIC prevention and treatment.
Stay ahead of the curve on new fire protection strategies.
Avoid errors and steer clear of issues that could compromise sprinkler operation. Sprinkler designers, installers, and AHJs all need the 2010 Automatic Sprinkler Systems Handbook.
PDF Catalog
PDF Pages | PDF Title |
---|---|
1 | Automatic Sprinkler Systems Handbook – ELEVENTH EDITION |
2 | Copyright |
4 | Contents |
8 | Preface |
9 | Acknowledgments |
12 | About the Editor |
13 | PART ONE – NFPA 13, Standard for the Installation of Sprinkler Systems, with Commentary |
15 | Administration – CHAPTER 1 1.1 Scope |
16 | 1.2 Purpose |
17 | 1.3 Application |
18 | 1.4 Retroactivity |
19 | 1.5 Equivalency 1.6 New Technology |
20 | 1.7 Units and Symbols |
23 | Referenced Publications – CHAPTER 2 2.1 General 2.2 NFPA Publications |
24 | 2.3 Other Publications |
27 | 2.4 References for Extracts in Mandatory Sections |
29 | Definitions – CHAPTER 3 3.1 General 3.2 NFPA Official Definitions |
31 | 3.3 General Definitions |
39 | 3.4 Sprinkler System Type Definitions |
45 | 3.5 System Component Definitions |
47 | 3.6 Sprinkler Definitions |
58 | 3.7 Construction Definitions |
66 | 3.8 Private Water Supply Piping Definitions |
69 | 3.9 Storage Definitions |
90 | 3.10 Marine Definitions |
92 | 3.11 Hanging and Bracing Definitions |
95 | General Requirements – CHAPTER 4 4.1 Level of Protection 4.2 Limited Area Systems |
96 | 4.3 Owner’s Certificate |
97 | 4.4 Additives |
99 | Classification of Occupancies and Commodities – CHAPTER 5 5.1 Classification of Occupancies |
100 | 5.2 Light Hazard Occupancies |
101 | 5.3 Ordinary Hazard Occupancies |
107 | 5.4 Extra Hazard Occupancies |
108 | 5.5 Special Occupancy Hazards |
109 | 5.6 Commodity Classification |
127 | System Components and Hardware – CHAPTER 6 6.1 General |
131 | 6.2 Sprinklers |
144 | 6.3 Aboveground Pipe and Tube |
152 | 6.4 Fittings |
155 | 6.5 Joining of Pipe and Fittings |
164 | 6.6 Hangers 6.7 Valves |
166 | 6.8 Fire Department Connections |
168 | 6.9 Waterflow Alarm Devices |
173 | System Requirements – CHAPTER 7 7.1 Wet Pipe Systems |
176 | 7.2 Dry Pipe Systems |
189 | 7.3 Preaction Systems and Deluge Systems |
196 | 7.4 Combined Dry Pipe and Preaction Systems for Piers, Terminals, and Wharves |
199 | 7.5 Multi-Cycle Systems |
200 | 7.6 Antifreeze Systems |
212 | 7.7 Automatic Sprinkler Systems with Non–Fire ProtectionConnections |
215 | 7.8 Outside Sprinklers for Protection Against Exposure Fires(Exposure Protection Sprinkler Systems) |
220 | 7.9 Refrigerated Spaces |
227 | 7.10 Commercial-Type Cooking Equipment and Ventilation |
233 | Installation Requirements – CHAPTER 8 8.1 Basic Requirements |
235 | 8.2 System Protection Area Limitations |
238 | 8.3 Use of Sprinklers |
247 | 8.4 Application of Sprinkler Types |
254 | 8.5 Position, Location, Spacing, and Use of Sprinklers |
266 | 8.6 Standard Pendent and Upright Spray Sprinklers |
292 | 8.7 Sidewall Standard Spray Sprinklers |
301 | 8.8 Extended Coverage Upright and Pendent Spray Sprinklers |
312 | 8.9 Extended Coverage Sidewall Spray Sprinklers |
319 | 8.10 Residential Sprinklers |
329 | 8.11 CMSA Sprinklers |
336 | 8.12 Early Suppression Fast-Response Sprinklers |
342 | 8.13 In-Rack Sprinklers |
344 | 8.14 Pilot Line Detectors |
345 | 8.15 Special Situations |
372 | 8.16 Piping Installation |
395 | 8.17 System Attachments |
415 | Hanging, Bracing, and Restraint of System Piping – CHAPTER 9 9.1 Hangers |
433 | 9.2 Installation of Pipe Hangers |
444 | 9.3 Protection of Piping Against Damage Where Subject toEarthquakes |
487 | Underground Piping – CHAPTER 10 10.1 Piping Materials |
494 | 10.2 Fittings |
495 | 10.3 Joining of Pipe and Fittings |
496 | 10.4 Depth of Cover |
497 | 10.5 Protection Against Freezing |
498 | 10.6 Protection Against Damage |
501 | 10.7 Requirement for Laying Pipe |
502 | 10.8 Joint Restraint |
512 | 10.9 Backfilling |
513 | 10.10 Testing and Acceptance |
521 | Design Approaches – CHAPTER 11 11.1 General |
526 | 11.2 Occupancy Hazard Fire Control Approach |
537 | 11.3 Special Design Approaches |
541 | General Requirements for Storage – CHAPTER 12 12.1 General |
545 | 12.2 Hose Connections 12.3 Adjacent Hazards or Design Methods |
547 | 12.4 Wet Pipe Systems 12.5 Dry Pipe and Preaction Systems |
548 | 12.6 Storage Applications |
553 | 12.7 Discharge Considerations |
555 | 12.8 Hose Demand 12.9 Restrictions |
557 | 12.10 Room Design Method 12.11 High-Expansion Foam Systems |
558 | 12.12 Protection of Idle Pallets |
565 | Miscellaneous Storage – CHAPTER 13 13.1 Miscellaneous Storage Up to 12 ft (3.7 m) in Height 13.2 Design Basis |
569 | 13.3 In-Rack Sprinklers |
571 | Protection of Class I to Class IVCommodities That Are StoredPalletized, Solid Piled, BinBoxes, Shelf Storage, orBack-to-Back Shelf Storage – CHAPTER 14 14.1 General |
573 | 14.2 Control Mode Density/Area Sprinkler Protection Criteriafor Palletized, Solid Piled, Bin Box, Shelf Storage , or Back-to-Back Shelf Storage |
577 | 14.3 CMSA Sprinklers for Palletized or Solid-Piled Storage ofClass I Through Class IV Commodities |
581 | 14.4 Early Suppression Fast-Response (ESFR) Sprinklers forPalletized or Solid-Piled Storage of Class I Through Class IVCommodities |
583 | 14.5 Special Design for Palletized, Solid-Piled, Bin Box, or ShelfStorage of Class I Through Class IV Commodities |
584 | 14.6 High-Expansion Foam – Reduction to Ceiling Density |
585 | Protection of Plastic andRubber Commodities That AreStored Palletized, Solid Piled,Bin Boxes, Shelf Storage, orBack-to-Back Shelf Storage – CHAPTER 15 15.1 General |
586 | 15.2 Control Mode Density/Area Sprinkler Protection Criteriafor Palletized, Solid-Piled, Bin Box, Shelf Storage, or Back-to-Back Shelf Storage |
595 | 15.3 CMSA Sprinklers for Palletized or Solid-Piled Storage ofPlastic and Rubber Commodities |
597 | 15.4 Early Suppression Fast-Response (ESFR) Sprinklers forPalletized or Solid-Piled Storage of Plastic and RubberCommodities |
602 | 15.5 High-Expansion Foam – Reduction to Ceiling Density |
603 | Protection of Class I Through Class IV Commodities That AreStored on Racks – CHAPTER 16 16.1 General |
615 | 16.2 Protection Criteria for Rack Storage of Class I ThroughClass IV Commodities Stored Up to and Including 25 ft (7.6 m)in Height |
638 | 16.3 Protection Criteria for Rack Storage of Class I ThroughClass IV Commodities Stored Over 25 ft (7.6 m) in Height |
665 | Protection of Plastic and Rubber Commodities ThatAre Stored on Racks – CHAPTER 17 17.1 General |
678 | 17.2 Protection Criteria for Rack Storage of PlasticsCommodities Stored Up to and Including 25 ft (7.6 m) in Height |
697 | 17.3 Protection Criteria for Rack Storage of PlasticsCommodities Stored Over 25 ft (7.6 m) in Height |
715 | Protection of Rubber Tire Storage – CHAPTER 18 18.1 General |
717 | 18.2 Columns Within Rubber Tire Storage |
718 | 18.3 Water Supplies 18.4 Ceiling Systems |
723 | 18.5 In-Rack Sprinkler System Requirements for Protection ofRubber Tires 18.6 Reduced Discharge Density |
725 | Protection of Roll Paper – CHAPTER 19 19.1 Protection of Roll Paper Storage |
735 | Special Designs of Storage Protection – CHAPTER 20 20.1 General 20.2 Plastic Motor Vehicle Components |
736 | 20.3 Sprinkler Design Criteria for Storage and Display of ClassI Through Class IV Commodities, Cartoned NonexpandedGroup A Plastics and Nonexpanded Exposed Group A Plastics inRetail Stores |
743 | 20.4 Protection of Baled Cotton Storage |
745 | 20.5 Sprinkler Protection of Carton Records Storage withCatwalk Access |
750 | 20.6 Compact Storage of Commodities Consisting of Paper Files,Magazines, Books, and Similar Documents in Folders |
752 | 20.7 Protection of High Bay Records Storage |
755 | Special Occupancy Requirements – CHAPTER 21 21.1 General 21.2 Flammable and Combustible Liquids |
759 | 21.3 Aerosol Products |
761 | 21.4 Spray Application Using Flammable or CombustibleMaterials |
764 | 21.5 Solvent Extraction Plants 21.6 Installation and Use of Stationary Combustion Engines andGas Turbines |
765 | 21.7 Nitrate Film |
768 | 21.8 Laboratories Using Chemicals |
770 | 21.9 Oxygen-Fuel Gas Systems for Welding, Cutting, and AlliedProcesses |
771 | 21.10 Acetylene Cylinder Charging Plants 21.11 Storage, Use, and Handling of Compressed Gases andCryogenic Fluids in Portable and Stationary Containers,Cylinders, and Tanks |
772 | 21.12 Utility LP-Gas Plants 21.13 Production, Storage, and Handling of Liquefied NaturalGas (LNG) 21.14 Protection of Information Technology Equipment |
773 | 21.15 Standard on Incinerators, and Waste and Linen HandlingSystems and Equipment |
778 | 21.16 Standard for Ovens and Furnaces |
779 | 21.17 Class A Hyperbaric Chambers |
780 | 21.18 Fixed Guideway Transit Systems 21.19 Motion Picture and Television Production StudioSoundstages and Approved Production Facilities |
781 | 21.20 Animal Housing Facilities 21.21 Water Cooling Towers |
792 | 21.22 Standard for the Construction and Fire Protection ofMarine Terminals, Piers, and Wharves |
794 | 21.23 Cleanrooms |
796 | 21.24 Aircraft Hangars 21.25 Airport Terminal Buildings, Fueling Ramp Drainage, andLoading Walkways 21.26 Aircraft Engine Test Facilities |
797 | 21.27 Advanced Light Water Reactor Electric Generating Plants |
801 | 21.28 Light Water Nuclear Power Plants 21.29 Electric Generating Plants and High Voltage DirectCurrent Converter Stations. [NFPA 850] |
804 | 21.30 Hydroelectric Generating Plants. [NFPA 851] |
805 | 21.31 Code for the Protection of Cultural Resource Properties- Museums, Libraries, and Places of Worship. [NFPA 909] |
807 | 21.32 National Electrical Code 21.33 Fire Protection of Telecommunication Facilities 21.34 Exhaust Systems for Air Conveying of Vapors, Gases,Mists, and Noncombustible Particulate Solids |
808 | 21.35 Class E Hypobaric Facilities |
809 | 21.36 Coal Mines |
810 | 21.37 Metal/Nonmetal Mining and Metal Mineral ProcessingFacilities |
813 | Plans and Calculations – CHAPTER 22 22.1 Working Plans |
822 | 22.2 Water Supply Information |
825 | 22.3 Hydraulic Calculation Forms |
842 | 22.4 Hydraulic Calculation Procedures |
877 | 22.5 Pipe Schedules |
883 | 22.6 Deluge Systems |
884 | 22.7 Exposure Protection Sprinkler Systems |
885 | 22.8 In-Rack Sprinklers |
886 | 22.9 Hose Allowance |
887 | Water Supplies – CHAPTER 23 23.1 General |
892 | 23.2 Types |
901 | Systems Acceptance – CHAPTER 24 24.1 Approval of Sprinkler Systems and Private Fire ServiceMains |
905 | 24.2 Acceptance Requirements |
912 | 24.3 Circulating Closed Loop Systems 24.4 Instructions |
913 | 24.5 Hydraulic Design Information Sign |
914 | 24.6 General Information Sign |
917 | Marine Systems – CHAPTER 25 25.1 General |
922 | 25.2 System Components, Hardware, and Use |
926 | 25.3 System Requirements |
927 | 25.4 Installation Requirements |
931 | 25.5 Design Approaches |
932 | 25.6 Plans and Calculations 25.7 Water Supplies |
938 | 25.8 System Acceptance 25.9 System Instructions and Maintenance |
941 | System Inspection, Testing, and Maintenance – CHAPTER 26 26.1 General |
942 | 26.2 Inactive Sprinkler Systems Abandoned in Place |
945 | Explanatory Material – ANNEX A |
947 | Miscellaneous Topics – ANNEX B B.1 B.2 Sprinkler System Performance Criteria |
949 | B.3 Effect of Clearance to Ceiling on Sprinkler Performance |
951 | Explanation of Test Data and Procedures for Rack Storage – ANNEX C |
953 | Sprinkler System Information from the 2009 Edition of theLife Safety Code – ANNEX D
D.1 Introduction |
956 | D.2 Life Safety Code |
961 | Development of the Design Approach to Conform withSEI/ASCE 7 – ANNEX E E.1 E.2 Assumptions on System Geometry |
963 | E.3 Computing the Seismic Demand on Piping Systems |
964 | E.4 Flexural Capacity of Piping |
965 | E.5 Sample Seismic Calculation using the ZOI Method |
966 | E.6 Limitations of the ZOI Method |
967 | Informational References – ANNEX F F.1 Referenced Publications |
971 | F.2 Informational References. (Reserved) F.3 References for Extracts in Informational Sections |
973 | PART TWO – Supplements |
975 | SUPPLEMENT 1 – A Brief History of Sprinklers,Sprinkler Systems, and theNFPA Sprinkler Standards EARLY HISTORY: 1870–1900 |
980 | THE NEXT 50 YEARS: 1900 THROUGHWORLD WAR II |
981 | POST–WORLD WAR II ERA: 1947–1972 |
986 | THE 1970s THROUGH 1999 |
988 | CONSOLIDATION: THE 1999 EDITION |
989 | AUTOMATIC SPRINKLER COMMITTEESAND LEADERSHIP |
991 | SUPPLEMENT 2 – Fire Protection ResearchFoundation and its ResearchSupporting Fire Sprinklers FPRF RESEARCH REPORTS |
996 | FPRF SUPPORTING DATA REPORTS |
999 | SUPPLEMENT 3 – U.S. Experience with Sprinklersand Other Automatic FireExtinguishing Equipment EXECUTIVE SUMMARY |
1000 | PRESENCE OF SPRINKLERS AND OTHERAUTOMATIC EXTINGUISHING EQUIPMENT |
1003 | AUTOMATIC EXTINGUISHING EQUIPMENTTYPE |
1005 | AUTOMATIC EXTINGUISHING EQUIPMENTOPERATIONAL RELIABILITY |
1011 | AUTOMATIC EXTINGUISHING EQUIPMENTEFFECTIVENESS |
1028 | OTHER ISSUES |
1030 | CONCLUDING POINTS |
1033 | SUPPLEMENT 4 – An International Perspective onAutomatic Sprinklers INSTALLATION STANDARDS |
1035 | APSAD R1 NFPA 13 PRODUCT STANDARDS |
1036 | WORLD SPRINKLER MARKET |
1039 | SUPPLEMENT 5 – Technical/Substantive Changesfrom the 2007 Edition to the 2010Edition of NFPA 13 |
1066 | NFPA 13 Index |
1087 | Untitled Tentative Interim Amendment |