🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
OH OhioEnergyCode 2017

OH OhioEnergyCode 2017

$62.29

Ohio Energy Code – Energy Efficiency Provisions of the Ohio Building Code

Published By Publication Date Number of Pages
OH 2017 377
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Ohio modifications fully integrated to the 2012 International Energy Conservation Code and ASHRAE 90.1-2010. Effective Date: January 1, 2017

PDF Catalog

PDF Pages PDF Title
1 OHIO ENERGY CODE – ENERGY EFFICIENCY PROVISIONS OF THE OHIO BUILDING CODE
2 OHIO ENERGY CODE – ENERGY EFFICIENCY PROVISIONS OF THE OHIO BUILDING CODE TITLE PAGE
3 COPYRIGHT
4 PREFACE
8 EFFECTIVE USE OF THE INTERNATIONAL ENERGY CONSERVATION CODE
10 TABLE OF CONTENTS
12 OHIO BUILDING CODE CHAPTER 13: ENERGY EFFICIENCY
SECTION 1301 GENERAL
14 IECC—COMMERCIAL PROVISIONS
TABLE OF CONTENTS
16 CHAPTER 1 SCOPE AND ADMINISTRATION
SECTION C101 SCOPE AND GENERAL REQUIREMENTS
18 CHAPTER 2 DEFINITIONS
SECTION C201 GENERAL
SECTION C202 GENERAL DEFINITIONS
22 CHAPTER 3 GENERAL REQUIREMENTS
SECTION C301 CLIMATE ZONES
23 FIGURE C301.1 CLIMATE ZONES
24 TABLE C301.1 CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
25 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
26 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
27 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
28 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
29 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
30 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
31 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
32 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
33 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
34 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
35 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
36 TABLE C301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
TABLE C301.3(1) INTERNATIONAL CLIMATE ZONE DEFINITIONS
37 TABLE C301.3(2) INTERNATIONAL CLIMATE ZONE DEFINITIONS
SECTION C302 DESIGN CONDITIONS
SECTION C303 MATERIALS, SYSTEMS AND EQUIPMENT
TABLE C303.1.3(1) DEFAULT GLAZED FENESTRATION U-FACTOR
TABLE C303.1.3(2) DEFAULT DOOR U-FACTORS
38 TABLE C303.1.3(3) DEFAULT GLAZED FENESTRATION SHGC AND VT
40 CHAPTER 4 COMMERCIAL ENERGY EFFICIENCY
SECTION C401 GENERAL
SECTION C402 BUILDING ENVELOPE REQUIREMENTS
41 TABLE C402.1.2 OPAQUE THERMAL ENVELOPE ASSEMBLY REQUIREMENTSa
42 TABLE C402.2 OPAQUE THERMAL ENVELOPE REQUIREMENTSa
43 TABLE C402.3 BUILDING ENVELOPE REQUIREMENTS: FENESTRATION
44 EQUATION C4-1
EQUATION C4-2
45 TABLE C402.3.3.1 SHGC ADJUSTMENT MULTIPLIERS
46 TABLE C402.4.3 MAXIMUM AIR INFILTRATION RATE FOR FENESTRATION ASSEMBLIES
47 SECTION C403 BUILDING MECHANICAL SYSTEMS
48 EQUATION C4-3
EQUATION C4-4
49 TABLE C403.2.3(1) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS
50 TABLE C403.2.3(1)—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS
51 TABLE C403.2.3(2) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS
52 TABLE C403.2.3(2)—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS
53 TABLE C403.2.3(3) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS AND ROOM AIR-CONDITIONER HEAT PUMPS
54 TABLE C403.2.3(3)—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS AND ROOM AIR-CONDITIONER HEAT PUMPS
55 TABLE 403.2.3(4) WARM AIR FURNACES AND COMBINATION WARM AIR FURNACES/AIR-CONDITIONING UNITS, WARM AIR DUCT FURNACES AND UNIT HEATERS, MINIMUM EFFICIENCY REQUIREMENTS
56 TABLE C403.2.3(5) MINIMUM EFFICIENCY REQUIREMENTS: GAS- AND OIL-FIRED BOILERS
TABLE C403.2.3(6) MINIMUM EFFICIENCY REQUIREMENTS: CONDENSING UNITS, ELECTRICALLY OPERATED
57 TABLE C403.2.3(7) MINIMUM EFFICIENCY REQUIREMENTS: WATER CHILLING PACKAGESa
58 TABLE C403.2.3(8) MINIMUM EFFICIENCY REQUIREMENTS: HEAT REJECTION EQUIPMENT
TABLE C403.2.3(9) HEAT TRANSFER EQUIPMENT
60 EQUATION C4-5
TABLE C403.2.6 ENERGY RECOVERY REQUIREMENT
61 TABLE C403.2.8 MINIMUM PIPE INSULATION THICKNESS (thickness in inches)a
62 TABLE C403.2.10.1(1) FAN POWER LIMITATION
TABLE C403.2.10.1(2) FAN POWER LIMITATION PRESSURE DROP ADJUSTMENT
TABLE C403.3.1(1) ECONOMIZER REQUIREMENTS
63 TABLE C403.3.1(2) EQUIPMENT EFFICIENCY PERFORMANCE EXCEPTION FOR ECONOMIZERS
TABLE C403.3.1.1.3(1) HIGH-LIMIT SHUTOFF CONTROL OPTIONS FOR AIR ECONOMIZERS
64 TABLE C403.3.1.1.3(2) HIGH-LIMIT SHUTOFF CONTROL SETTING FOR AIR ECONOMIZERS
67 TABLE C403.4.7 MAXIMUM HOT GAS BYPASS CAPACITY
SECTION C404 SERVICE WATER HEATING (Mandatory)
SECTION C405 ELECTRICAL POWER AND LIGHTING SYSTEMS (MANDATORY)
68 TABLE C404.2 MINIMUM PERFORMANCE OF WATER-HEATING EQUIPMENT
72 TABLE C405.5.2(1) INTERIOR LIGHTING POWER ALLOWANCES: BUILDING AREA METHOD
TABLE C405.6.2(1) EXTERIOR LIGHTING ZONES
73 TABLE C405.5.2(2) INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD
TABLE C405.5.2(2)—continued INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD
74 TABLE C405.5.2(2)—continued INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD
SECTION C406 ADDITIONAL EFFICIENCY PACKAGE OPTIONS
SECTION C407 TOTAL BUILDING PERFORMANCE
75 TABLE C405.6.2(2) INDIVIDUAL LIGHTING POWER ALLOWANCES FOR BUILDING EXTERIORS
76 TABLE C406.2(1) UNITARY AIR CONDITIONERS AND CONDENSING UNITS, ELECTRICALLY OPERATED, EFFICIENCY REQUIREMENTS
TABLE C406.2(2) UNITARY AND APPLIED HEAT PUMPS, ELECTRICALLY OPERATED, EFFICIENCY REQUIREMENTS
TABLE C406.2(3) PACKAGED TERMINAL AIR CONDITIONERS AND PACKAGED TERMINAL HEAT PUMPS
77 TABLE C406.2(4) WARM AIR FURNACES AND COMBINATION WARM AIR FURNACES/AIR-CONDITIONING UNITS, WARM AIR DUCT FURNACES AND UNIT HEATERS, EFFICIENCY REQUIREMENTS
TABLE C406.2(5) BOILER, EFFICIENCY REQUIREMENTS
78 TABLE C406.2(6) CHILLERS—EFFICIENCY REQUIREMENTS
79 TABLE C406.2(7) ABSORPTION CHILLERS—EFFICIENCY REQUIREMENTS
TABLE C406.3 REDUCED INTERIOR LIGHTING POWER
80 SECTION C408 SYSTEM COMMISSIONING
81 TABLE C407.5.1(1) SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS
82 TABLE C407.5.1(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS
83 TABLE C407.5.1(2) HVAC SYSTEMS MAP
84 TABLE C407.5.1(3) SPECIFICATIONS FOR THE STANDARD REFERENCE DESIGN HVAC SYSTEM DESCRIPTIONS
85 TABLE C407.5.1(4) NUMBER OF CHILLERS
TABLE C407.5.1(5) WATER CHILLER TYPES
88 CHAPTER 5 REFERENCED STANDARDS
AAMA
AHAM
AHRI
89 AMCA
ANSI
ASHRAE
ASTM
90 CSA
CTI
DASMA
91 DOE
ICC
IESNA
ISO
92 NFRC
SMACNA
UL
US-FTC
WDMA
94 INDEX
102 IECC—RESIDENTIAL PROVISIONS
TABLE OF CONTENTS
104 CHAPTER 1 SCOPE AND ADMINISTRATION
SECTION R101 SCOPE AND GENERAL REQUIREMENTS
106 CHAPTER 2 DEFINITIONS
SECTION R201 GENERAL
SECTION R202 GENERAL DEFINITIONS
110 CHAPTER 3 GENERAL REQUIREMENTS
SECTION R301 CLIMATE ZONES
111 FIGURE R301.1 CLIMATE ZONES
112 TABLE R301.1 CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
113 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
114 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
115 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
116 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
117 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
118 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
119 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
120 TABLE R301.1—continuedCLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
121 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
122 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
123 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
124 TABLE R301.1—continued CLIMATE ZONES, MOISTURE REGIMES, AND WARM-HUMID DESIGNATIONS BY STATE, COUNTY AND TERRITORY
TABLE R301.3(1) INTERNATIONAL CLIMATE ZONE DEFINITIONS
125 TABLE R301.3(2) INTERNATIONAL CLIMATE ZONE DEFINITIONS
SECTION R302 DESIGN CONDITIONS
SECTION R303 MATERIALS, SYSTEMS AND EQUIPMENT
TABLE R303.1.3(1) DEFAULT GLAZED FENESTRATION U-FACTOR
TABLE R303.1.3(2) DEFAULT DOOR U-FACTORS
126 TABLE R303.1.3(3) DEFAULT GLAZED FENESTRATION SHGC AND VT
128 CHAPTER 4 RESIDENTIAL ENERGY EFFICIENCY
SECTION R401 GENERAL
SECTION R402 BUILDING THERMAL ENVELOPE
TABLE R402.1.1 INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENTa
129 TABLE R402.1.3 EQUIVALENT U-FACTORSa
130 TABLE R402.2.6 STEEL-FRAME CEILING, WALL AND FLOOR INSULATION (R-VALUE)
131 TABLE R402.4.1.1 AIR BARRIER AND INSULATION INSTALLATION
132 SECTION R403 SYSTEMS
133 TABLE R403.4.2 MAXIMUM RUN LENGTH (feet)a
134 TABLE R403.5.1 MECHANICAL VENTILATION SYSTEM FAN EFFICACY
SECTION R404 ELECTRICAL POWER AND LIGHTING SYSTEMS (MANDATORY)
SECTION R405 SIMULATED PERFORMANCE ALTERNATIVE (PERFORMANCE)
136 TABLE R405.5.2(1) SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS
137 TABLE R405.5.2(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS
138 TABLE R405.5.2(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS
TABLE R405.5.2(2) DEFAULT DISTRIBUTION SYSTEM EFFICIENCIES FOR PROPOSED DESIGNSa
140 CHAPTER 5 REFERENCED STANDARDS
AAMA
ACCA
ASHRAE
ASTM
141 CSA
ICC
NFRC
US-FTC
WDMA
142 INDEX
148 ANSI/ASHRAE/IES STANDARD 90.1-2010
149 ASHRAE STANDING STANDARD PROJECT COMMITTEE 90.1
150 ASHRAE STANDARDS COMMITTEE 2009–2010
SPECIAL NOTE
DISCLAIMER
152 CONTENTS
153 FOREWORD
1. PURPOSE
2. SCOPE
154 3. DEFINITIONS, ABBREVIATIONS,AND ACRONYMS
156 FIGURE 3.1 COMPUTING THE DAYLIGHT AREA UNDER SKYLIGHTS
157 FIGURE 3.2 COMPUTING THE DAYLIGHT AREA UNDER ROOFTOP MONITORS
163 FIGURE 3.3 COMPUTING THE PRIMARY SIDELIGHTED AREA
165 FIGURE 3-4 COMPUTING THE SECONDARY SIDELIGHTED AREA
167 TABLE 3.1 HEATED SPACE CRITERIA
170 4. ADMINISTRATION AND ENFORCEMENT
172 5. BUILDING ENVELOPE
174 FIGURE 5.1 EXTERIOR AND SEMI-EXTERIOR BUILDING ENVELOPE
175 TABLE 5.5-1 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 1 (A,B)
176 TABLE 5.5-2 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 2 (A,B)
177 TABLE 5.5-3 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 3 (A,B,C)
178 TABLE 5.5-4 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 4 (A,B,C)
179 TABLE 5.5-5 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 5 (A,B,C)
180 TABLE 5.5-6 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 6 (A,B)
181 TABLE 5.5-7 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 7
182 TABLE 5.5-8 BUILDING ENVELOPE REQUIREMENTS FOR CLIMATE ZONE 8
183 TABLE 5.5.3.1.2 INCREASED ROOF INSULATION LEVELS
184 TABLE 5.5.4.4.1 SHGC MULTIPLIERS FOR PERMANENT PROJECTIONS
188 6. HEATING, VENTILATING, AND AIR CONDITIONING
189 TABLE 6.3.2 ELIMINATE REQUIRED ECONOMIZER FOR COMFORT COOLING BY INCREASING COOLING EFFICIENCY
192 TABLE 6.4.3.4.3 MAXIMUM DAMPER LEAKAGE, CFM PER FT AT 1.0 IN W.G.
195 TABLE 6.5.1A MINIMUM FAN-COOLING UNIT SIZE FOR WHICH AN ECONOMIZER IS REQUIRED FOR COMFORT COOLING
TABLE 6.5.1B MINIMUM FAN-COOLING UNIT SIZE FOR WHICH AN ECONOMIZER IS REQUIRED FOR COMPUTER ROOMS
196 TABLE 6.5.1.1.3A HIGH-LIMIT SHUTOFF CONTROL OPTIONS OFR AIR ECONOMIZERS
TABLE 6.5.1.1.3B HIGH-LIMIT SHUTOFF CONTROL SETTINGS FOR AIR ECONOMIZERS
197 TABLE 6.5.1.2.1 WATER ECONOMIZER SIZING DRY-BULB AND WET-BULB REQUIREMENTS FOR COMPUTER ROOMS
TABLE 6.5.1.2.1 WATER ECONOMIZER SIZING DRY-BULB AND WET-BULB REQUIREMENTS FOR COMPUTER ROOMS
199 TABLE 6.5.3.1.1A FAN POWER LIMITATION
200 TABLE 6.5.3.1.1B FAN POWER LIMITATION PRESSURE DROP ADJUSTMENT
201 TABLE 6.5.4.5 PIPING SYSTEM DESIGN MAXIMUM FLOW RATE IN GPM
202 TABLE 6.5.6.1 EXHAUST AIR ENERGY RECOVERY REQUIREMENTS
203 TABLE 6.5.7.1.3 MAXIMUM NET EXHAUST FLOW RATE, CFM PER LINEAR FOOT OF HOOD LENGTH
TABLE 6.5.9 HOT GAS BYPASS LIMITATION
204 TABLE 6.6.1 POWER USAGE EFFECTIVENESS MAXIMUM
205 TABLE 6.8.1A ELECTRONICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS—MINIMUM IFFICIENCY REQUIREMENTS
206 TABLE 6.8.1A ELECTRICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS—MINIMUM EFFICIENCY REQUIREMENTS
207 TABLE 6.8.1B ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS—MINIMUM EFFICIENCY REQUIREMENTS
209 TABLE 6.8.1C WATER CHILLING PACKAGES—EFFICIENCY REQUIREMENTS
210 TABLE 6.8.1D ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE PACKAGE VERTICAL AIR CONDITIONERS, SINGLE PACKAGE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS AND ROOM AIR CONDITIONER HEAT PUMPS—MINIMUM EFFICIENCY REQUIREMENTS
211 TABLE 6.8.1D ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE-PACKAGE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS AND ROOM AIR CONDITIONER HEAT PUMPS—MINIMUM EFFICIENCY REQUIRMENTS-CONTINUED
TABLE 6.8.1E WARM-AIR FURNACES AND COMBINATION WARM AIR FURNACES/AIR CONDITIONING UNITS, WARM-AIR DUCT FURNACES, AND UNIT HEATERS
212 TABLE 6.8.1F GAS- AND OIL-FIRED BOILERS, MINIMUM EFFICIENCY REQUREMENTS
213 TABLE 6.8.1G PERFORMANCE REQUIREMENTS FOR HEAT REJECTION EQUIPMENT
TALBE 6.8.1H HEAT TRANSFER EQUIPMENT
TABLE 6.8.11 ELECTRICALL OPERATED VARIABLE REFRIGERANT FLOW AIR CONDITIONERS—MINIMUM EFFICINECY REQUIREMENTS
214 TABLE 6.8.1J ELECTRICALLY OPERATED VARIABLE REFRIGERANT FLOW AIR-TO-AIR AND APPLIED HEAT PUMPS—MINIMUM EFFICIENCY REQUIREMENTS
215 TABLE 6.8.1J ELECTRICALLY OPERATED VARIABLE REFRIGERANT FLOW AIR TO AIR AND APPLIED HEAT PUMPS—MINIMUM EFFICIENCY REQUIREMENTS- CONTINUED
216 TABLE 6.8.1K AIR CONDITIONERS AND CONDENSING UNITS SERVING COMPUTERS ROOMS
217 TABLE 6.8.2A MINIMUM DUCT INSULATION R-VALUE, COOLING AND HEATING ONLY SUPPLY DUCTS AND RETURN DUCTS
TABLE 6.8.2B MINIMUM DUCT INSULATION R-VALUE, COMBINED HEATING AND COOLING SUPPLY DUCTS AND RETURN DUCTS
218 TABLE 6.8.3A MINIMUM PIPE INSULATION THICKNESS HEATING AND HOT WATER SYSTEMS (STEAM, STEAM CONDENSATE, HOT WATER HEATING AND DOMESTIC WATER SYSTEMS)
TABLE 6.8.3B MINIMUM PIPE INSULATION THICKNESS COOLING SYSTEMS (CHILLED WATER, BRINE, AND REFRIGERANT)
219 7. SERVICE WATER HEATING
221 TABLE 7.8 PERFORMANCE REQUIREMENTS FOR WATER-HEATING EQUIPMENT
222 8. POWER
TABLE 8.1 MINIMUM NOMINAL EFFICIENCY LEVELS FOR NEMA CLASS I LOW-VOLTAGE DRY-TYPE DISTRIBUTION TRANSFORMERS
224 9. LIGHTING
227 TABLE 9.4.3A EXTERIOR LIGHTING ZONES
228 TABLE 9.4.3B INDIVIDUAL LIGHTING POWER ALLOWANCES FOR BUILDING EXTERIORS
229 TABLE 9.4.3B INDIVIDUAL LIGHTING POWER ALLOWANCES FOR BUILDING EXTERIORS- CONTINUED
230 TABLE 9.5.1 LIGHTING POWER DENSITIES USING THE BUILDING AREA METHOD
232 TABLE 9.6.1 LIGHTING POWER DENSITIES USING THE SPACE-BY-SPACE METHOD
TABLE 9.6.1 LIGHTING POWER DENSITIES USING THE SPACE-BY-SPACE METHOD (CONTINUED)
233 TABLE 9.6.1 LIGHTING POWER DENSITIES USING THE SPACE-BY-SPACE METHOD (CONTINUED)
TABLE 9.6.1 LIGHTING POWER DENSITIES USING THE SPACE-BY-SPACE METHOD (CONTINUED)
234 TABLE 9.6.2 CONTROL FACTORS USED IN CALCULATING ADDITIONAL INTERIOR LIGHTING POWER ALLOWANCE
235 10. OTHER EQUIPMENT
236 TABLE 10.8A MINIMUM NOMINAL EFFICIENCY FOR GENERAL PURPOSE DESIGN A AND DESIGN B MOTORS RATED 600 VOLTS OR LESS
237 TABLE 10.8B MINIMUM NOMINAL FULL-LOAD EFFICIENCY FOR 60 HZ NEMA GENERAL PURPOSE ELECTRIC MOTORS (SUBTYPE I) RATED 600 VOLTS OR LESS (RANDOM WOUND)
238 TABLE 10.8C MINIMUM NOMINAL FULL-LOAD EFFICIENCY OF GENERAL PURPOSE ELECTRIC MOTORS (SUBTYPE II AND DESIGN B)
239 TABLE 10.8C MINIMUM NOMINAL FULL-LOAD EFFICIENCY OF GENERAL PURPOSE ELECTRIC MOTORS (SUBTYPE II AND DESIGN B) (CONTINUED)
240 11. ENERGY COST BUDGET METHOD
242 TABLE 11.3.1 MODELING REQUIREMENTS FOR CALCULATING DESIGN ENERGY COST AND ENERGY COST BUDGET
243 TABLE 11.3.1 MODELING REQUIREMENTS FOR CALCULATING DESIGN ENERGY COST AND ENERGY COST BUDGET (CONTINUED)
244 TABLE 11.3.1 MODELING REQUIREMENTS FOR CALCULATING DESIGN ENERGY COST AND ENERGY COST BUDGET (CONTINUED)
245 TABLE 11.3.1 MODELING REQUIREMENTS FOR CALCULATING DESIGN ENERGY COST AND ENERGY COST BUDGET (CONTINUED)
246 TABLE 11.3.1 MODELING REQUIREMENTS FOR CALCULATING DESIGN ENERGY COST AND ENERGY COST BUDGET (CONTINUED)
FIGURE 11.3.2 HVAC SYSTEMS MAP
248 TABLE 11.3.2A BUDGET SYSTEM DESCRIPTIONS
249 TABLE 11.3.2B NUMBER OF CHILLERS
TABLE 11.3.2C WATER CHILLER TYPES
TABLE 11.3.2D ECONOMIZER HIGH LIMIT SHUTOFF
250 12. NORMATIVE REFERENCES
AIR CONDITIONING, HEATING AND REFRIGERATION INSTITUTE
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL
AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION
AMERICAN NATIONAL STANDARDS INSTITUTE
ASSOCIATION OF HOME APPLIANCE MANUFACTURERS
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING ENGINEERS
251 AMERICAN SOCIETY FOR TESTING AND MATERIALS
252 CANADIAN STANDARDS ASSOCIATION
COOLING TECHNOLOGY INSTITUTE
DOOR AND ACCESS SYSTEMS MANUFACTURERS ASSOCIATION (DASMA)
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION
NATIONAL FIRE PROTECTION ASSOCIATION
NATIONAL FENESTRATION RATING COUNCIL
TELECOMMUNICATIONS INDUSTRY ASSOCIATION
253 UNDERWRITERS LABORATORIES, INC.
U.S. DEPARTMENT OF ENERGY
U.S. SECURITY AND EXCHANGE COMMISSION
WINDOW AND DOOR MANUFACTURERS ASSOCIATION
254 NORMATIVE APPENDIX A
A1. GENERAL
A2. ROOFS
TABLE A2.2 ASSEMBLY U-FACTORS FOR ROOFS WITH INSULATION ENTIRELY ABOVE DECK
255 A3. ABOVE-GRADE WALLS
256 TABLE A2.3 ASSEMBLY U-FACTORS FOR METAL BUILDING ROOFS
257 TABLE A2.4 ASSEMBLY U-FACTORS FOR ATTIC ROOFS WITH WOOD JOISTS
258 TABLE A2.4.2 SINGLE-RAFTER ROOFS
TABLE A2.5 ASSEMBLY U-FACTORS FOR ATTIC ROOFS WITH STEEL JOISTS (4.0 FT ON CENTER)
259 TABLE A3.1A ASSEMBLY U-FACTORS FOR ABOVE-GRADE CONCRETE WALLS AND MASONRY WALLS
260 TABLE A3.1A ASSEMBLY U-FACTORS FOR ABOVE-GRADE CONCRETE WALLS AND MASONRY WALLS (CONTINUED)
261 TABLE A3.1A ASSEMBLY U-FACTORS FOR ABOVE-GRADE CONCRETE WALLS AND MASONRY WALLS (CONTINUED)
TABLE A3.1B ASSEMBLY U-FACTORS, C-FACTORS, RU, RC AND HC FOR CONCRETE
262 TABLE A3.1B ASSEMBLY U-FACTORS, C-FACTORS, RU, RC AND HC FOR CONCRETE (CONTINUED)
TABLE A3.1C ASSEMBLY U-FACTORS, C-FACTORS, RU, RC AND HC FOR CONCRETE BLOCK WALLS
263 TABLE A3.1C ASSEMBLY U-FACTORS, C-FACTORS, RU, RC AND HC FOR CONCRETE BLOCK WALLS (CONTINUED)
264 TABLE A3.1C ASSEMBLY U-FACTORS, C-FACTORS, RU, RC AND HC FOR CONCRETE BLOCK WALLS (CONTINUED)
265 TABLE A3.1D EFFECTIVE R-VALUES FOR INSULATION/FRAMING LAYERS ADDED TO ABOVE-GRADE MASS WALLS AND BELOW-GRADE WALLS
266 TABLE A3.2 ASSEMBLY U-FACTORS FOR METAL BUILDING WALLS
268 TABLE A3.3 ASSEMBLY U-FACTORS FOR STEEL-FRAME WALLS
269 TABLE A3.4 ASSEMBLY U-FACTORS FOR WOOD-FRAME WALLS
270 A4. BELOW-GRADE WALLS
TABLE A4.2 ASSEMBLY C-FACTORS FOR BELOW-GRADE WALLS
271 TABLE A4.2 ASSEMBLY C-FACTORS FOR BELOW-GRADE WALLS (CONTINUED)
A5. FLOORS
273 TABLE A5.2 ASSEMBLY U-FACTORS FOR MASS FLOORS
274 TABLE A5.3 ASSEMBLY U-FACTORS FOR STEEL-JOISTS FLOORS
275 TABLE A5.4 ASSEMBLY U-FACTORS FOR WOOD-JOIST FLOORS
276 A6. SLAB-ON-GRADE FLOORS
A7. OPAQUE DOORS
A8. FENESTRATION
277 TABLE A6.3 ASSEMBLY F-FACTORS FOR SLAB-ON-GRADE FLOORS
TABLE A8.1A ASSEMBLY U-FACTORS FOR UNLABELED SKYLIGHTS
278 TABLE A8.1A ASSEMBLY U-FACTORS FOR UNLABELED SKYLIGHTS (CONTINUED)
279 TABLE A8.1A ASSEMBLY U-FACTORS FOR UNLABELED SKYLIGHTS (CONTINUED)
TABLE A8.1B ASSEMBLY SHGCS AND ASSEMBLY VISIBLE TRANSMITTANCES (VTS) FOR UNLABELED SKYLIGHTS
280 TABLE A8.1B ASSEMBLY SHGCS AND ASSEMBLY VISIBLE TRANSMITTANCES (VTS) FOR UNLABELED SKYLIGHTS (CONTINUED)
TABLE A8.2 ASSEMBLY U-FACTORS, ASSEMBLY SHGCS, AND ASSEMBLY VISIBLE TRANSMITTANCES (VTS) FOR UNLABELED VERTICAL FENESTRATION
281 A9. DETERMINATION OF ALTERNATE ASSEMBLY U-FACTORS, C-FACTORS, F-FACTORS, OR HEAT CAPACITIES
TABLE A9.2A EFFECTIVE INSULATION/FRAMING LAYER R-VALUES FOR ROOF AND FLOOR INSULATION INSTALLED BETWEEN METAL FRAMING (4 FT ON CENTER)
282 TABLE A9.2B EFFECTIVE INSULATION/FRAMING LAYER R-VALUES FOR WALL INSULATION INSTALLED BETWEEN STEEL FRAMING
283 TABLE A9.4A VALUES FOR CAVITY AIR SPACES
TABLE A9.4B EMITTANCE VALUES OF VARIOUS SURFACES AND EFFECTIVE EMITTANCES OF AIR SPACES
TABLE A9.4C EFFECTIVE R-VALUES FOR FIBERGLASS
284 TABLE A9.4D R-VALUES FOR BUILDING MATERIALS
TABLE A9.4E THERMAL CONDUCTIVITY OF CONCRETE BLOCK MATERIAL
285 NORMATIVE APPENDIX B—BUILDING ENVELOPE CLIMATE CRITERIA
B1. GENERAL
FIGURE B-1 U.S. MAP SHOWING DOE CLIMATE ZONES (BRIGGS ET AL. 2003)
286 TABLE B-1 US CLIMATE ZONES
287 TABLE B-1 US CLIMATE ZONES (CONTINUED)
288 TABLE B-1 US CLIMATE ZONES (CONTINUED)
289 TABLE B-1 US CLIMATE ZONES (CONTINUED)
290 TABLE B-1 US CLIMATE ZONES (CONTINUED)
291 TABLE B-1 US CLIMATE ZONES (CONTINUED)
292 TABLE B-1 US CLIMATE ZONES (CONTINUED)
293 B2. MAJOR CLIMATE TYPE DEFINITIONS
TABLE B-2 CANADIAN CLIMATIC ZONES
294 TALBE B-3 INTERNATIONAL CLIMATE ZONES
295 TABLE B-4 INTERNATIONAL CLIMATE ZONE DEFINITIONS
296 NORMATIVE APPENDIX C METHODOLOGY FOR BUILDING ENVELOPE TRADE-OFF OPTION IN SUBSECTION 5.6
C1. MINIMUM INFORMATION
FIGURE C1.3 SKYLIGHT WELL DIMENSIONS
C2. OUTPUT REQUIREMENTS
C3. BASE ENVELOPE DESIGN AND PROPOSED DESIGN SPECIFICATION
297 TABLE C3.5 VT FACTOR FOR THE BASE ENVELOPE DESIGN
C4. ZONING AND BUILDING GEOMETRY
C5. MODELING ASSUMPTIONS
298 C6. EQUATIONS FOR ENVELOPE TRADE-OFF CALCULATIONS
TABLE C6.1 INPUT VARIABLES
EQUATION C-1
EQUATION C-2
EQUATION C-3
EQUATION C-5
EQUATION C-6
EQUATION C-7
299 EQUATION C-8
EQUATION C-9
EQUATION C-10
EQUATION C-11
TABLE C6.5.1 OVERHANG PROJECTION COEFFICIENTS
TABLE C6.6 COEFFICIENTS FOR CALCULATING KD
EQUATION C-12
300 TABLE C6.7A COOLING DELTA LOAD COEFFICIENTS
TABLE C6.7B HEATING DELTA LOAD COEFFICIENTS
EQUATION C-13
301 EQUATION C-15
EQUATION C-17
302 TABLE C6.8.2 COOLING COEFFICIENTS FOR THE EXTERIOR WALL EQUATION
303 EQUATION C-17
EQUATION C-18
TABLE C6.8.3 HEATING COEFFICIENTS FOR THE EXTERIOR WALL EQUATION
304 EQUATION C-20
EQUATION C-21
EQUATION C-22
TABLE C6.9 HEATING AND COOLING COEFFICIENTS FOR SKYLIGHTS
TABLE C6.10.1 EFFECTIVE R-VALUE OF SOIL FOR BELOW-GRADE WALLS
TABLE C6.10.2 HEATING AND COOLING COEFFICIENTS FOR OTHER EXTERIOR AND SEMI-EXTERIOR SURFACES
305 NORMATIVE APPENDIX D CLIMATIC DATA
TABLE D-1 US AND US TERRITORY CLIMATIC DATA
306 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
307 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
308 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
309 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
310 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
311 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
312 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
313 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
314 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
315 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
316 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
317 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
318 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
319 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
320 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
321 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
322 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
323 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
324 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
325 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
326 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
327 TABLE D-1 US AND US TERRITORY CLIMATIC DATA (CONTINUED)
328 TABLE D-2 CANADIAN CLIMATIC DATA
329 TABLE D-2 CANADIAN CLIMATIC DATA (CONTINUED)
330 TABLE D-2 CANADIAN CLIMATIC DATA (CONTINUED)
331 TABLE D-3 INTERNATIONAL CLIMATIC DATA
332 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
333 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
334 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
335 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
336 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
337 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
338 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
339 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
340 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
341 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
342 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
343 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
344 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
345 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
346 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
347 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
348 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
349 TABLE D-3 INTERNATIONAL CLIMATIC DATA (CONTINUED)
350 INFORMATIVE APPENDIX E INFORMATIVE REFERENCES
AABC
BLAST
CRRC
DOE-2
MICA
NEBB
SMACNA
TMY2 DATA
WYEC2 DATA
IWEC DATA
THE GREEN GRID ADMINISTRATION
352 INFORMATIVE APPENDIX F ADDENDA DESCRIPTION INFORMATION
TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1-2010 CHANGES IDENTIFIED
353 TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1-2010 CHANGES IDENTIFIED (CONTINUED)
354 TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1-2010 CHANGES IDENTIFIED (CONTINUED)
355 TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1-2010 CHANGES IDENTIFIED (CONTINUED)
356 TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1-2010 CHANGES IDENTIFIED (CONTINUED)
357 TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1-2010 CHANGES IDENTIFIED (CONTINUED)
358 TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1-2010 CHANGES IDENTIFIED (CONTINUED)
359 TABLE F-1 ADDENDA TO ANSI/ASHRAE/IES STANDARD 90.1-2010 CHANGES IDENTIFIED (CONTINUED)
360 NORMATIVE APPENDIX G PERFORMANCE RATING METHOD
G1. GENERAL
361 G2. SIMULATION GENERAL REQUIREMENTS
G3. CALCULATION OF THE PROPOSED AND BASELINE BUILDING PERFORMANCE
362 TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE
363 TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE (CONTINUED)
364 TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE (CONTINUED)
365 TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE (CONTINUED)
366 TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE (CONTINUED)
367 TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE (CONTINUED)
368 TABLE G3.1 MODELING REQUIREMENTS FOR CALCULATING PROPOSED AND BASELINE BUILDING PERFORMANCE (CONTINUED)
369 TABLE G3.1.1A BASELINE HVAC SYSTEM TYPES
TABLE G3.1.1B BASELINE SYSTEM DESCRIPTIONS
371 TABLE G3.1.2.6A CLIMATE CONDITIONS UNDER WHICH ECONOMIZERS ARE INCLUDED FOR BASELINE SYSTEMS 3 THROUGH 8
TABLE G3.1.2.6B ECONOMIZER HIGH-LIMIT SHUTOFF
TABLE G3.1.2.9 BASELINE FAN BRAKE HORSEPOWER
TABLE G3.1.3.7 TYPE AND NUMBER OF CHILLERS
372 TABLE G3.1.3.15 PART LOAD PERFORMANCE FOR VAV FAN SYSTEMS
TABLE G3.2 POWER ADJUSTMENT PERCENTAGES FOR AUTOMATIC LIGHTING CONTROLS
374 NOTICE
375 FORM FOR SUBMITTAL OF PROPOSED CHANGE TO AN ASHRAE STANDARD UNDER CONTINUOUS MAINTENANCE
376 ICC-SRCC SOLAR RATING & CERTIFICATION CORPORATION
377 ICC EVALUATION SERVICE
OH OhioEnergyCode 2017
$62.29