TMS Masonry Structures Behavior and Design 4thEdition 2018
$97.50
Masonry Structures: Behavior and Design, 4th Edition
| Published By | Publication Date | Number of Pages |
| TMS | 2018 | 770 |
The most widely used masonry textbook, Masonry Structures, Behavior and Design, by Dr. Ahmad Hamid has been completely updated and will be available from The Masonry Society (TMS) in the Spring of 2018. The long-awaited update to this popular textbook includes much of the discussion that made previous editions so useful in both the classroom and in the workplace, but it has also been revised to discuss new research findings and to reflect the design provisions in the 2016 TMS 402/602 Building Code Requirements and Specification for Masonry Structures. The fourth edition incorporates discussions on: • Ancient Masonry • Contemporary Masonry • Building Design • Masonry Materials • Masonry Assemblages • Reinforced Beams and Lintels • Flexural Wall • Loadbearing Walls Under Axial Load and Out-Of-Plane Bending • Columns and Pilasters • Shear Walls • Infill Walls and Partitions • Masonry Veneer and Cavity Walls • Connectors • Fire Resistance and Design for Environmental Loads • Construction Considerations and Details • Design of Loadbearing Single-Story Masonry Buildings • Design of Multi-Story Loadbearing Masonry Buildings The textbook includes numerous design examples (based on the strength design method) and two buildings designs of a single-story building and a multistory building. This textbook is ideal for undergraduate and graduate level courses and it is an exceptional reference for practicing designers.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Table of Contents and Preface |
| 3 | Table of Contents |
| 23 | Preface |
| 27 | Acknowledgments |
| 28 | Dedication |
| 29 | About the Author |
| 30 | Chapter 1 1.1 Introduction 1.2 History of Masonry Materials |
| 35 | 1.3 Early Building Elements |
| 49 | 1.4 Development of Building Structure |
| 56 | 1.5 Performance of Existing Structures |
| 58 | 1.6 Restoration and Retrofit of Heritage Structures |
| 60 | 1.7 Closure 1.8 References |
| 61 | 1.9 Problems |
| 62 | Chapter 2 2.1 Introduction 2.2 Masonry Elements |
| 71 | 2.3 Masonry Building Systems |
| 74 | 2.4 Types of Masonry Construction |
| 81 | 2.5 Research, Codes, and Standards |
| 83 | 2.6 Sources of Information |
| 84 | 2.7 Closure 2.8 References |
| 85 | 2.9 Problems |
| 86 | Chapter 3 3.1 Introduction |
| 87 | 3.2 Structural Requirements |
| 105 | 3.3 Environmental Requirements |
| 107 | 3.4 Aesthetics |
| 110 | 3.5 Integration of Requirements |
| 111 | 3.6 Planning the Building |
| 129 | 3.7 Economic Aspects |
| 130 | 3.8 Closure |
| 131 | 3.9 References 3.10 Problems |
| 134 | Chapter 4 4.1 Introduction |
| 135 | 4.2 Common Properties of Masonry Units |
| 142 | 4.3 Clay Masonry Units |
| 153 | 4.4 Concrete Masonry Units |
| 161 | 4.5 Calcium Silicate Units |
| 162 | 4.6 Building Stone |
| 166 | 4.7 Glass Masonry Units |
| 167 | 4.8 Special Nonconventional Masonry Units |
| 169 | 4.9 Mortar |
| 177 | 4.10 Grout |
| 180 | 4.11 Reinforcement |
| 183 | 4.12 Associated Materials |
| 187 | 4.13 Closure 4.14 References |
| 192 | 4.15 Problems |
| 194 | Chapter 5 5.1 Introduction |
| 195 | 5.2 Axial Compression |
| 214 | 5.3 Combined Axial Compression and Flexure |
| 220 | 5.4 Flexural Tensile Strength for Out-of-Plane Bending |
| 232 | 5.5 Shear Strength Along Mortar Bed Joints |
| 238 | 5.6 In-Plane Tensile Strength |
| 243 | 5.7 Combined Loading and Biaxial Strength |
| 246 | 5.8 Examples |
| 251 | 5.9 Closure 5.10 References |
| 258 | 5.11 Problems |
| 260 | Chapter 6 6.1 Introduction |
| 262 | 6.2 Flexural Behavior and Design |
| 273 | 6.3 Shear Behavior and Design |
| 280 | 6.4 Development, Anchorage and Splicing of Reinforcement |
| 285 | 6.5 Serviceability Requirements |
| 287 | 6.6 Load Distribution on Lintel Beams |
| 289 | 6.7 Closure 6.8 References |
| 291 | 6.9 Problems |
| 294 | Chapter 7 7.1 Introduction |
| 295 | 7.2 Load-Resisting Mechanisms |
| 298 | 7.3 Flexural Behavior of Unreinforced Walls |
| 305 | 7.4 Analysis and Design of Unreinforced Walls |
| 314 | 7.5 Arching |
| 322 | 7.6 Reinforced Flexural Walls |
| 328 | 7.7 Analysis and Design of Reinforced Flexural Walls |
| 332 | 7.8 Reinforced Flexural Wall Design Examples |
| 336 | 7.9 Prestressed Masonry Walls |
| 345 | 7.10 Closure |
| 346 | 7.11 References |
| 350 | 7.12 Problems |
| 352 | Chapter 8 8.1 Introduction |
| 353 | 8.2 Overview of Status and Trends in Design Provisions |
| 355 | 8.3 Analysis and Design Under Combined Axial Load and Bending |
| 359 | 8.4 Effects of Slenderness |
| 366 | 8.5 Concentrated Loads |
| 368 | 8.6 Design Examples |
| 375 | 8.7 Closure |
| 376 | 8.8 References |
| 377 | 8.9 Problems |
| 378 | Chapter 9 9.1 Introduction |
| 380 | 9.2 Column Behavior |
| 382 | 9.3 Column Design |
| 388 | 9.4 Column Design Examples |
| 393 | 9.5 Pilaster Design |
| 399 | 9.6 Closure 9.7 References |
| 400 | 9.8 Problems |
| 402 | Chapter 10 10.1 Introduction |
| 403 | 10.2 Influence of Types and Layout of Shear Walls |
| 404 | 10.3 Behavior and Failure Modes |
| 421 | 10.4 Distribution of Loads to Shear Walls |
| 426 | 10.5 Effect of Openings on Wall Rigidity and Force Distribution |
| 436 | 10.6 Design of Shear Walls |
| 453 | 10.7 Design Examples |
| 469 | 10.8 Closure 10.9 References |
| 472 | 10.10 Problems |
| 476 | Chapter 11 11.1 Introduction |
| 477 | 11.2 Infill Walls |
| 497 | 11.3 Walls Supported on Beams |
| 502 | 11.4 Closure |
| 503 | 11.5 References |
| 505 | 11.6 Problems |
| 508 | Chapter 12 12.1 Introduction |
| 514 | 12.2 Masonry Rain Screen Walls |
| 525 | 12.3 Shelf Angle Supports |
| 531 | 12.4 Structural Design Considerations |
| 538 | 12.5 Design for Movement Joints |
| 540 | 12.6 Residential Construction of Brick Veneer 12.7 Adhered Veneer 12.8 Closure |
| 541 | 12.9 References |
| 544 | 12.10 Problems |
| 546 | Chapter 13 13.1 Introduction |
| 547 | 13.2 Wall Ties |
| 563 | 13.3 Anchors |
| 567 | 13.4 Fasteners |
| 572 | 13.5 Closure 13.6 References |
| 574 | 13.7 Problems |
| 576 | Chapter 14 14.1 Introduction |
| 577 | 14.2 Applications of Building Science to Masonry Construction |
| 578 | 14.3 Fire Resistance |
| 588 | 14.4 Thermal Performance |
| 598 | 14.5 Condensation Considerations |
| 606 | 14.6 Rain Penetration |
| 609 | 14.7 Sound Control |
| 618 | 14.8 Closure |
| 619 | 14.9 References |
| 621 | 14.10 Problems |
| 624 | Chapter 15 15.1 Introduction |
| 625 | 15.2 Workmanship and Construction Practices |
| 644 | 15.3 Influence of Weather on Construction Requirements |
| 648 | 15.4 Protection of Masonry During Construction |
| 652 | 15.5 Flashing and Dampproof Courses |
| 654 | 15.6 Movement Joints |
| 658 | 15.7 Connection Details |
| 661 | 15.8 More Competitive Masonry Construction |
| 663 | 15.9 Inspection and Quality Control |
| 666 | 15.10 Closure 15.11 References |
| 668 | 15.12 Problems |
| 670 | Chapter 16 16.1 General Introduction |
| 671 | 16.2 Behavior, Form and Layout |
| 678 | 16.3 Design Loads |
| 679 | 16.4 Design of Components |
| 685 | 16.5 Example Design of Single-Story Building |
| 705 | 16.6 Closure 16.7 References 16.8 Problems |
| 708 | Chapter 17 17.1 Introduction |
| 710 | 17.2 Basic Design Concepts |
| 713 | 17.3 Distribution of Shear and Moment Due to Lateral Loads |
| 718 | 17.4 Torsional Effects |
| 721 | 17.5 Design Example of Multistory Building |
| 750 | 17.6 Closure 17.7 References |
| 751 | 17.8 Problems |
| 753 | Appendices and Index Appendix A |
| 759 | Appendix B |
| 765 | Index |
