UOP 910-07:2007 Edition
$59.15
Total Chloride in LPG and Gaseous Hydrocarbons by Microcoulometry
| Published By | Publication Date | Number of Pages |
| UOP | 2007-08-29 | 9 |
Full Description
This method is for determining total chloride in gaseous hydrocarbons or liquefied petroleum gas (LPG) at concentrations ranging from approximately 1 to 1000 ng/mL for gas or mass-ppm (µg/g) for LPG. Except for fluoride, other halogens present are calculated as chloride. Chloride cannot be determined quantitatively if sulfur is present at concentrations greater than approximately 1 mass-%, see Note 1.
Related products
-
BS EN 13071-2:2008+A1:2013
Stationary waste containers up to 5 000 l, top lifted and bottom emptied – Additional…
-
ISO 8322-10:1995
Building construction — Measuring instruments — Procedures for determining accuracy in use — Part 10:…
-
ASTM-D2829/D2829M 2023
D2829/D2829M-07(2023) Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems Published By Publication…
-
IEC 62642-2-73:2015
Systèmes d’alarme – Systèmes d’alarme contre l’intrusion et les hold-up – Partie 2-73 : détecteurs…
-
IEC 62642-5-3:2010
Systèmes d’alarme – Systèmes d’alarme contre l’intrusion et les hold-up – Partie 5-3 : interconnexions…
-
FL Energy 07 2007
Florida Building Code – Energy Published By Publication Date Number of Pages FL 2007 228
-
SAE AS 6119:2011
Fitting Assembly, Elbow, 90° Axially Swaged, Hydraulic, up to 1500 psi Published By Publication Date…
-
DOT MUTCD 2023 11ed
FHWA Manual on Uniform Traffic Control Devices (MUTCD), 11th Edition Published By Publication Date Number…
-
BS EN 61703:2016 – TC:2020 Edition
Tracked Changes. Mathematical expressions for reliability, availability, maintainability and maintenance support terms Published By Publication…
-
IEC 62642-2-2:2010
Systèmes d’alarme – Systèmes d’alarme contre l’intrusion et les hold-up – Partie 2-2 : détecteurs…
-
ASTM-E746 2007
E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems Published…
-
ASTM-D2829/D2829M 2019
D2829/D2829M-07(2019)e1 Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems Published By Publication…
-
BS EN 16602-30-11:2021 – TC:2022 Edition
Tracked Changes. Space product assurance. Derating. EEE components Published By Publication Date Number of Pages…
-
BS EN IEC 61000-4-11:2020:2024 Edition
Electromagnetic compatibility (EMC) – Testing and measurement techniques. Voltage dips, short interruptions and voltage variations…
-
IEC 61076-3-110:2012
Connectors for electronic equipment – Product requirements – Part 3-110: Detail specification for shielded, free…
-
ASME A17.2 2014
ASME A17.2 Guide for Inspection of Elevators, Escalators, and Moving Walks Published By Publication Date…
-
AS/NZS ISO 14644.4:2002 (R2016)
Cleanrooms and associated controlled environments – Design, construction and start-up Published By Publication Date Number…
-
BS EN 62040-3:2011:2012 Edition
Uninterruptible power systems (UPS) – Method of specifying the performance and test requirements Published By…
-
ASTM-D3617/D3617M:2015 Edition
D3617/D3617M-07(2015)e1 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application Published By…
-
DIN EN 203-2-10:2007 Edition
Gas heated catering equipment – Part 2-10: Specific requirements – Chargrills Published By Publication Date…
-
BSI 20/30402587 DC 2020
BS EN IEC 63237-10. Household and similar electrical appliances. Product information properties – Part 10.…
-
ASTM-E746 2014
E746-07(2014) Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems Published…
-
BS 4839-3:1977
Specification for blow moulded polyolefin containers. – Closed head containers over 60 litres up to…
-
IEC 61987-10:2009
Industrial-process measurement and control – Data structures and elements in process equipment catalogues – Part…
-
DIN EN ISO 28927-10:2011 Edition
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 10:…
-
UNE-EN 61076-3-110:2008
Connectors for electronic equipment- Product requirements- Part 3-110: Detail specification for shielded, free and fixed…
-
BS EN 124-2:2015
Gully tops and manhole tops for vehicular and pedestrian areas – Gully tops and manhole…
-
BS EN IEC 61158-4-19:2019 – TC:2020 Edition
Tracked Changes. Industrial communication networks. Fieldbus specifications – Data-link layer protocol specification. Type 19 elements…
-
BS EN IEC 61557-12:2022
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1…
-
JIS C 3663-6:2007
Rubber insulated cables – Rated voltages up to and including 450/750 V – Part 6:…
-
ASTM-A798 2007(Redline)
A798/A798M-07 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications (Redline)…
-
ASTM-F2510:2007 Edition(Redline)
F2510/F2510M-07 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density…
-
BS EN 61557-12:2008
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V…
-
SAE J 2765:2017
Procedure for Measuring System Cop [Coefficient of Performance] of A Mobile Air Conditioning System on…
-
IEC 62642-2-72:2015
Systèmes d’alarme – Systèmes d’alarme contre l’intrusion et les hold-up – Partie 2-72 : détecteurs…
-
UOP 930-07:2007 Edition
Chloride in LPG and Gaseous Hydrocarbons by Dry Colorimetry Published By Publication Date Number of…
-
IEC 62642-2-71:2015
Systèmes d’alarme – Systèmes d’alarme contre l’intrusion et les hold-up – Partie 2-71 : détecteurs…
-
DIN EN 1870-10:2013 Edition
Safety of woodworking machines – Circular sawing machines – Part 10: Single blade automatic and…
-
IEC 62642-4:2010
Alarm systems – Intrusion and hold-up systems – Part 4: Warning devices Published By Publication…
-
BS EN 13071-2:2019
Stationary waste containers up to 5 000 l, top lifted and bottom emptied – Additional…
