WA SeattleEnergyCode 2012
$28.17
Seattle Energy Code
| Published By | Publication Date | Number of Pages |
| WA | 2012 | 224 |
A fully integrated custom code based on the 2012 International Energy Conservation Code® (IECC®) and the 2012 Washington State Energy Code.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | 2012 SEATTLE ENERGY CODE 2012 WASHINGTON STATE ENERGY CODE AS AMENDED BY THE CITY OF SEATTLE |
| 2 | COPYRIGHT |
| 3 | PREFACE |
| 6 | WASHINGTON STATE PREFACE |
| 9 | EFFECTIVE USE OF THE INTERNATIONAL ENERGY CONSERVATION CODE |
| 11 | LEGISLATION |
| 13 | TABLE OF CONTENTS |
| 15 | IECC—COMMERCIAL PROVISIONS TABLE OF CONTENTS |
| 17 | CHAPTER 1 [CE] SCOPE AND ADMINISTRATION SECTION C101 SCOPE AND GENERAL REQUIREMENTS |
| 18 | TABLE C101.4.3.1 ECONOMIZER COMPLIANCE OPTIONS FOR MECHANICAL ALTERATIONS |
| 19 | TABLE C101.4.3.1—continued ECONOMIZER COMPLIANCE OPTIONS FOR MECHANICAL ALTERATIONS |
| 22 | SECTION C102 ALTERNATE MATERIALS—METHOD OF CONSTRUCTION, DESIGN OR INSULATING SYSTEMS SECTION C103 APPLICATIONS AND PERMITS ((CONSTRUCTION DOCUMENTS)) |
| 23 | SECTION C104 INSPECTIONS |
| 24 | SECTION C105 VALIDITY SECTION C106 REFERENCED STANDARDS SECTION C107 FEES SECTION C108 ((STOP WORK ORDER)) ENFORCEMENT |
| 25 | SECTION C109 ((BOARD OF APPEALS)) ADMINISTRATIVE REVIEW SECTION C110 VIOLATIONS SECTION C111 LIABILITY |
| 27 | CHAPTER 2 [CE] DEFINITIONS SECTION C201 GENERAL SECTION C202 GENERAL DEFINITIONS |
| 29 | FIGURE C202.1 DAYLIGHT ZONE |
| 35 | CHAPTER 3 [CE] GENERAL REQUIREMENTS SECTION C301 CLIMATE ZONES TABLE C301.1 CLIMATE ZONES, MOISTURE REGIMES, AND WARM HUMID DESIGNATIONS BY STATE AND COUNTY SECTION C302 DESIGN CONDITIONS SECTION C303 MATERIALS, SYSTEMS AND EQUIPMENT |
| 36 | TABLE C303.1.3(1) DEFAULT GLAZED FENESTRATION U-FACTOR TABLE C303.1.3(2) DEFAULT DOOR U-FACTORS TABLE C303.1.3(3) DEFAULT GLAZED FENESTRATION SHGC AND VT |
| 37 | TABLE C303.1.3(4) DEFAULT U-FACTORS FOR SKYLIGHTSa, b, c, d |
| 38 | TABLE C303.1.3(5) SMALL BUSINESS COMPLIANCE TABLE DEFAULT U-FACTORS FOR VERTICAL FENESTRATION |
| 39 | CHAPTER 4 [CE] COMMERCIAL ENERGY EFFICIENCY SECTION C401 GENERAL SECTION C402 BUILDING ENVELOPE REQUIREMENTS |
| 40 | TABLE C402.1.2 OPAQUE THERMAL ENVELOPE ASSEMBLY REQUIREMENTSa |
| 42 | TABLE C402.1.5.4 EXAMPLE OF SENSITIVITY ANALYSIS REPORT FORMAT |
| 43 | TABLE C402.1.5.12 FINANCIAL SECURITY AND ENERGY EFFICIENCY REIMBURSEMENTS |
| 44 | EQUATION C402-1 TARGET UAt |
| 45 | EQUATION C402-1—continued TARGET UAT |
| 46 | EQUATION C402-2 PROPOSED UAP |
| 47 | EQUATION C402-3 TARGET SHGCAt EQUATION C402-4 PROPOSED SHGCAP TABLE C402.2 OPAQUE THERMAL ENVELOPE REQUIREMENTSa, f |
| 48 | TABLE C402.2 OPAQUE THERMAL ENVELOPE REQUIREMENTSa, f—continued |
| 49 | TABLE C402.2.1.1 MINIMUM ROOF REFLECTANCE AND EMITTANCE OPTIONSa |
| 50 | TABLE C402.3 BUILDING ENVELOPE REQUIREMENTS—FENESTRATION |
| 51 | EQUATION C4-1 |
| 52 | EQUATION C4-2 TABLE C402.3.3.1 SHGC ADJUSTMENT MULTIPLIERS |
| 54 | TABLE C402.4.3 MAXIMUM AIR INFILTRATION RATE FOR FENESTRATION ASSEMBLIES |
| 55 | EQUATION C402-5 COMPONENT PERFORMANCE UxA |
| 56 | SECTION C403 MECHANICAL SYSTEMS |
| 57 | EQUATION C4-3 EQUATION C4-4 |
| 59 | TABLE C403.2.3(1) A MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS |
| 60 | TABLE C403.2.3(1) A—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AIR CONDITIONERS AND CONDENSING UNITS |
| 61 | TABLE C403.2.3(1) BMINIMUM EFFICIENCY REQUIREMENTS: AIR CONDITIONERS AND CONDENSING UNITS SERVING COMPUTER ROOMS |
| 62 | TABLE C403.2.3(1)C MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED VARIABLE REFRIGERANT FLOW AIR CONDITIONERS TABLE C403.2.3(1)D MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED VARIABLE REFRIGERANT FLOW AIR-TO-AIR AND APPLIED HEAT PUMPS |
| 63 | TABLE C403.2.3(1)D—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED VARIABLE REFRIGERANT FLOW AIR-TO-AIR AND APPLIED HEAT PUMPS |
| 64 | TABLE C403.2.3(2) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS |
| 65 | TABLE C403.2.3(2)—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED UNITARY AND APPLIED HEAT PUMPS |
| 66 | TABLE C403.2.3(3) MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE-PACKAGE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS AND ROOM AIR-CONDITIONER HEAT PUMPS |
| 67 | TABLE C403.2.3(3)—continued MINIMUM EFFICIENCY REQUIREMENTS: ELECTRICALLY OPERATED PACKAGED TERMINAL AIR CONDITIONERS, PACKAGED TERMINAL HEAT PUMPS, SINGLE-PACKAGE VERTICAL AIR CONDITIONERS, SINGLE VERTICAL HEAT PUMPS, ROOM AIR CONDITIONERS AND ROOM AIR-CONDITIONER HEAT PUMPS |
| 68 | TABLE 403.2.3(4) WARM AIR FURNACES AND COMBINATION WARM AIR FURNACES/AIR-CONDITIONING UNITS, WARM AIR DUCT FURNACES AND UNIT HEATERS, MINIMUM EFFICIENCY REQUIREMENTS |
| 69 | TABLE C403.2.3(5) MINIMUM EFFICIENCY REQUIREMENTS: GAS- AND OIL-FIRED BOILERS TABLE C403.2.3(6) RESERVED |
| 70 | TABLE C403.2.3(7) MINIMUM EFFICIENCY REQUIREMENTS: WATER CHILLING PACKAGESa |
| 71 | TABLE C403.2.3(8) MINIMUM EFFICIENCY REQUIREMENTS: HEAT REJECTION EQUIPMENT TABLE C403.2.3(9) HEAT TRANSFER EQUIPMENT |
| 75 | TABLE C403.2.6 ENERGY RECOVERY REQUIREMENT |
| 76 | EQUATION C4-5 |
| 77 | TABLE C403.2.8 MINIMUM PIPE INSULATION THICKNESS (thickness in inches)a, c TABLE C403.2.10.1(1) FAN POWER LIMITATION |
| 78 | TABLE C403.2.10.1(2) FAN POWER LIMITATION PRESSURE DROP ADJUSTMENT |
| 81 | TABLE C403.3.1(1) RESERVED TABLE C403.3.1(2) EQUIPMENT EFFICIENCY PERFORMANCE EXCEPTION FOR ECONOMIZERS |
| 82 | TABLE C403.3.1.1.3(1) HIGH-LIMIT SHUTOFF CONTROL OPTIONS FOR AIR ECONOMIZERS TABLE C403.3.1.1.3(2) HIGH-LIMIT SHUTOFF CONTROL SETTING FOR AIR ECONOMIZERS |
| 84 | C403.4.1 EXCEPTION 5 TABLE |
| 87 | TABLE C403.4.7 MAXIMUM HOT GAS BYPASS CAPACITY |
| 88 | TABLE C403.4.8 PIPING SYSTEM DESIGN MAXIMUM FLOW RATE IN GPM1 |
| 89 | SECTION C404 SERVICE WATER HEATING (MANDATORY) |
| 90 | TABLE C404.2 MINIMUM PERFORMANCE OF WATER-HEATING EQUIPMENT |
| 91 | SECTION C405 ELECTRICAL POWER AND LIGHTING SYSTEMS |
| 95 | TABLE C405.5.2(1) INTERIOR LIGHTING POWER ALLOWANCES: BUILDING AREA METHOD TABLE C405.5.2(2) INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD |
| 96 | TABLE C405.5.2(2)—continued INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD TABLE C405.5.2(2)—continued INTERIOR LIGHTING POWER ALLOWANCES: SPACE-BY-SPACE METHOD |
| 97 | TABLE C405.6.2(1) EXTERIOR LIGHTING ZONES |
| 98 | TABLE C405.6.2(2) INDIVIDUAL LIGHTING POWER ALLOWANCES FOR BUILDING EXTERIORS |
| 99 | SECTION C406 ADDITIONAL EFFICIENCY PACKAGE OPTIONS SECTION C407 TOTAL BUILDING PERFORMANCE |
| 100 | TABLE C407.5.1(1) SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS |
| 101 | TABLE C407.5.1(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS |
| 102 | TABLE C407.5.1(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS |
| 103 | TABLE C407.5.1(2) HVAC SYSTEMS MAP |
| 104 | TABLE C407.5.1(3) SPECIFICATIONS FOR THE STANDARD REFERENCE DESIGN HVAC SYSTEM DESCRIPTIONS |
| 105 | TABLE C407.5.1(4) NUMBER OF CHILLERS TABLE C407.5.1(5) WATER CHILLER TYPES |
| 106 | SECTION C408 SYSTEM COMMISSIONING |
| 108 | FIGURE C408.1.2.1 COMMISSIONING COMPLIANCE CHECKLIST |
| 109 | FIGURE C408.1.2.1—continued COMMISSIONING COMPLIANCE CHECKLIST |
| 111 | SECTION C409 ENERGY METERING ANDENERGY CONSUMPTION MANAGEMENT |
| 113 | SECTION C410 RENEWABLE ENERGY AND SOLAR READINESS |
| 117 | CHAPTER 5 [CE] REFERENCED STANDARDS AAMA AHAM AHRI |
| 118 | AMCA ANSI ASHRAE ASME |
| 119 | ASTM CSA CTI DASMA |
| 120 | DOE IAPMO ICC IESNA |
| 121 | ISO NEMA NFRC SMACNA UL |
| 122 | US-FTC WDMA |
| 123 | INDEX [CE] |
| 131 | IECC—RESIDENTIAL PROVISIONS TABLE OF CONTENTS |
| 133 | CHAPTER 1 [RE] SCOPE AND ADMINISTRATION PART 1—SCOPE AND APPLICATION SECTION R101 SCOPE AND GENERAL REQUIREMENTS |
| 134 | SECTION R102 ALTERNATE MATERIALS—METHOD OF CONSTRUCTION, DESIGN OR INSULATING SYSTEMS PART 2—ADMINISTRATION AND ENFORCEMENT SECTION R103 APPLICATIONS AND PERMITS ((CONSTRUCTION DOCUMENTS)) |
| 135 | SECTION R104 INSPECTIONS |
| 136 | SECTION R105 VALIDITY SECTION R106 REFERENCED STANDARDS SECTION R107 FEES SECTION R108 ENFORCEMENT ((STOP WORK ORDER)) |
| 137 | SECTION R109 ((BOARD OF APPEALS)) ADMINISTRATIVE REVIEW SECTION R110 VIOLATIONS SECTION R111 LIABILITY |
| 139 | CHAPTER 2 [RE] DEFINITIONS SECTION R201 GENERAL SECTION R202 GENERAL DEFINITIONS |
| 143 | CHAPTER 3 [RE] GENERAL REQUIREMENTS SECTION R301 CLIMATE ZONES TABLE R301.1 CLIMATE ZONES, MOISTURE REGIMES, AND WARM HUMID DESIGNATIONS BY STATE AND COUNTY SECTION R302 DESIGN CONDITIONS SECTION R303 MATERIALS, SYSTEMS AND EQUIPMENT |
| 144 | TABLE R303.1.3(1) DEFAULT GLAZED FENESTRATION U-FACTOR TABLE R303.1.3(2) DEFAULT DOOR U-FACTORS |
| 145 | TABLE R303.1.3(3) DEFAULT GLAZED FENESTRATION SHGC AND VT TABLE R303.1.3(4) DEFAULT U-FACTORS FOR SKYLIGHTSa, b, c, d |
| 146 | TABLE R303.1.3(5) SMALL BUSINESS COMPLIANCE TABLE DEFAULT U-FACTORS FOR VERTICAL FENESTRATION |
| 147 | CHAPTER 4 [RE] RESIDENTIAL ENERGY EFFICIENCY SECTION R401 GENERAL SECTION R402 BUILDING THERMAL ENVELOPE TABLE R402.1.1 INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENTa |
| 148 | TABLE R402.1.3 EQUIVALENT U-FACTORSa |
| 150 | TABLE R402.4.1.1 AIR BARRIER AND INSULATION INSTALLATION |
| 151 | TABLE R402.4.1.1—continued AIR BARRIER AND INSULATION INSTALLATION SECTION R403 SYSTEMS |
| 152 | TABLE R403.5.1 MECHANICAL VENTILATION SYSTEM FAN EFFICACY |
| 153 | SECTION R404 ELECTRICAL POWER AND LIGHTING SYSTEMS (MANDATORY) SECTION R405 SIMULATED PERFORMANCE ALTERNATIVE (PERFORMANCE) |
| 154 | SECTION R406 ADDITIONAL ENERGY EFFICIENCY REQUIREMENTS |
| 155 | TABLE R405.5.2(1) SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS |
| 156 | TABLE R405.5.2(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS |
| 157 | TABLE R405.5.2(1)—continued SPECIFICATIONS FOR THE STANDARD REFERENCE AND PROPOSED DESIGNS TABLE R405.5.2(2) DEFAULT DISTRIBUTION SYSTEM EFFICIENCIES FOR PROPOSED DESIGNSa |
| 158 | TABLE R406.2 ENERGY CREDITS (DEBITS) |
| 159 | TABLE R406.2—continued ENERGY CREDITS (DEBITS) |
| 160 | TABLE R406.2—continued ENERGY CREDITS (DEBITS) |
| 161 | CHAPTER 5 [RE] REFERENCED STANDARDS AAMA ACCA ASHRAE ASME |
| 162 | ASTM CSA ICC NEEA NFRC |
| 163 | US-FTC WDMA WSU |
| 165 | INDEX [RE] |
| 171 | CHAPTER 51-11C WAC WASHINGTON STATE ENERGY CODE, APPENDIX CHAPTERS TABLE OF CONTENTS |
| 173 | APPENDIX A DEFAULT HEAT LOSS COEFFICIENTS SECTION A101 GENERAL REQUIREMENTS TABLE A101.4 R-VALUE OF FIBERGLASS BATTS COMPRESSED WITHIN VARIOUS DEPTH CAVITIES Insulation R-Values at Standard Thickness |
| 174 | TABLE A101.5 DEFAULT R-VALUES FOR BUILDING MATERIALS |
| 175 | SECTION A102 CEILINGS |
| 176 | TABLE A102.1 DEFAULT U-FACTORS FOR CEILINGS TABLE A102.2.4(1) STEEL TRUSSa FRAMED CEILING UO |
| 177 | TABLE A102.2.4(2) STEEL TRUSSa FRAMED CEILING UO WITH R-3 SHEATHINGb TABLE A102.2.4(3) STEEL TRUSSa FRAMED CEILING UO WITH R-5 SHEATHINGb TABLE A102.2.4(4) STEEL TRUSSa FRAMED CEILING UO WITH R-10 SHEATHINGb TABLE A102.2.4(5) STEEL TRUSSa FRAMED CEILING UO WITH R-15 SHEATHINGb |
| 178 | TABLE A102.2.5 DEFAULT U-FACTORS FOR METAL BUILDING ROOFS |
| 179 | SECTION A103 ABOVE-GRADE WALLS |
| 180 | TABLE A102.2.6 ASSEMBLY U-FACTORS FOR ROOFS WITH INSULATION ENTIRELY ABOVE DECK (UNINTERRUPTED BY FRAMING) |
| 181 | TABLE A103.3.1(1) 2 × 4 SINGLE WOOD STUD: R-11 BATT TABLE A103.3.1(2) 2 × 4 SINGLE WOOD STUD: R-13 BATT |
| 182 | TABLE A103.3.1(3) 2 × 4 SINGLE WOOD STUD: R-15 BATT TABLE A103.3.1(4) 2 × 6 SINGLE WOOD STUD: R-19 BATT |
| 183 | TABLE A103.3.1(5) 2 × 6 SINGLE WOOD STUD: R-21 BATT TABLE A103.3.1(6) 2 × 6 SINGLE WOOD STUD: R-22 BATT |
| 184 | TABLE A103.3.1(7) 2 × 6 SINGLE WOOD STUD: TWO R-11 BATTS TABLE A103.3.1(8) 2 × 8 SINGLE STUD: R-25 BATT |
| 185 | TABLE A103.3.2 2 × 6: STRAP WALL TABLE A103.3.3(1) 2 × 6 + 2 × 4: DOUBLE WOOD STUD TABLE A103.3.3(2) 2 × 4 + 2 × 4: DOUBLE WOOD STUD TABLE A103.3.4 LOG WALLS TABLE A103.3.5 STRESS SKIN PANEL |
| 186 | TABLE A103.3.6.1(1) OVERALL ASSEMBLY U-FACTORS FOR METAL STUD WALLS WITH CONTINUOUS INSULATION |
| 187 | TABLE A103.3.6.1(2) OVERALL ASSEMBLY U-FACTORS FOR METAL STUD WALLS WITH INSULATION SUPPORTED BY Z-FURRING |
| 188 | TABLE A103.3.6.2 EFFECTIVE R-VALUES FOR METAL FRAMING AND CAVITY ONLY TABLE A103.3.6.3 DEFAULT METAL BUILDING WALL U-FACTORS |
| 189 | TABLE A103.3.7.1(1) DEFAULT U-FACTORS FOR CONCRETE MASONRY (CMU) WALLS |
| 190 | TABLE A103.3.7.1(2) (((1))) DEFAULT U-FACTORS FOR CONCRETE ((AND MASONRY)) WALLS |
| 191 | TABLE A103.3.7.1(2) (((1)))—continued DEFAULT U-FACTORS FOR CONCRETE AND MASONRY WALLSa, b, c, d, e |
| 192 | TABLE A103.3.7.1(((2)) 3 DEFAULT U-FACTORS FOR CONCRETE AND MASONRY WALLSa, b, c, d |
| 193 | TABLE A103.3.7.1(((2)) 3—continued DEFAULT U-FACTORS FOR CONCRETE AND MASONRY WALLSa, b, c, d |
| 194 | TABLE A103.3.7.1(((2)) 3—continued DEFAULT U-FACTORS FOR CONCRETE AND MASONRY WALLSa, b, c, d |
| 195 | TABLE A103.3.7.1(((2)) 3—continued DEFAULT U-FACTORS FOR CONCRETE AND MASONRY WALLSa, b, c, d TABLE A103.3.7.2 DEFAULT U-FACTORS FOR PERIPHERAL EDGES OF INTERMEDIATE CONCRETE FLOORSa, b, c |
| 196 | SECTION A104 BELOW-GRADE WALLS AND SLABS TABLE A104.1 DEFAULT WALL U-FACTORS AND SLAB F-FACTORS FOR BASEMENTS |
| 197 | SECTION A105 FLOORS OVER UNCONDITIONED SPACE TABLE A105.1(1) DEFAULT U-FACTORS FOR FLOORS OVER VENTED CRAWLSPACE OR UNHEATED BASEMENT TABLE A105.1(2) DEFAULT U-FACTORS FOR FLOORS OVER HEATED PLENUM CRAWLSPACES TABLE A105.1(3) DEFAULT U-FACTORS FOR EXPOSED FLOORS |
| 198 | SECTION A106 ON-GRADE SLAB FLOORS TABLE A106.1 DEFAULT F-FACTORS FOR ON-GRADE SLABS SECTION A107 DEFAULT U-FACTORS FOR DOORS |
| 199 | TABLE A107.1(1) DEFAULT U-FACTORS FOR DOORS |
| 200 | TABLE A107.1(2) DEFAULT U-FACTORS FOR REVOLVING DOORS TABLE A107.1(3) DEFAULT U-FACTORS FOR STEEL EMERGENCY DOORS TABLE A107.1(4) DEFAULT U-FACTORS FOR STEEL GARAGE AND HANGAR DOORS |
| 201 | SECTION A108 AIR INFILTRATION TABLE A108.1(1) ASSUMED EFFECTIVE AIR CHANGES PER HOUR TABLE A108.1(2) DEFAULT HEAT CAPACITY/DENSITY PRODUCT FOR AIR |
| 203 | APPENDIX B DEFAULT INTERNAL LOAD VALUES AND SCHEDULES SECTION B101 GENERAL SECTION B102 DEFAULT TABLES OF INTERNAL LOADS TABLE B102 ACCEPTABLE OCCUPANCY DENSITIES, RECEPTACLE POWER DENSITIES AND SERVICE HOT WATER CONSUMPTIONa SECTION B103 DEFAULT SCHEDULES |
| 204 | TABLE B103(1) ASSEMBLY OCCUPANCYa |
| 205 | TABLE B103(2) HEALTH OCCUPANCYa |
| 206 | TABLE B103(3) HOTEL/MOTEL OCCUPANCYa |
| 207 | TABLE B103(4) LIGHT MANUFACTURING OCCUPANCYa |
| 208 | TABLE B103(5) OFFICE OCCUPANCYa |
| 209 | TABLE B103(6) PARKING GARAGE OCCUPANCYa |
| 210 | TABLE B103(7) RESTAURANT OCCUPANCYa |
| 211 | TABLE B103(8) RETAIL OCCUPANCYa |
| 212 | TABLE B103(9) SCHOOL OCCUPANCYa |
| 213 | TABLE B103(10) WAREHOUSE OCCUPANCYa |
| 215 | APPENDIX C EXTERIOR DESIGN CONDITIONS TABLE C-1 OUTDOOR DESIGN TEMPERATURES TABLE C-1 OUTDOOR DESIGN TEMPERATURES—continued |
| 216 | TABLE C-1 OUTDOOR DESIGN TEMPERATURES—continued |
| 217 | APPENDIX D TOTAL BUILDING PERFORMANCE REPORTING FORMAT |
| 221 | ENERGY ANALYSIS SUMMARY FORM PROJECT INFORMATION |
