WRC 115:1966
$13.00
Further Studies on the Lateral-Torsional Buckling of Steel Beam-Columns
Published By | Publication Date | Number of Pages |
WRC | 1966 | 17 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
In this report solutions are presented for the inelastic lateral-torsional buckling strength of as-rolled steel wide-flange beam-columns. The beam-columns are subjected to an axial force and to bending moments applied either at one end of the member only or equally to both ends. The reduction in strength due to lateral-torsional buckling as compared with the in-plane performance of the member is examined and the influence of the cross-section size, yield stress level, and residual stress level on the lateral-torsional buckling strength is determined. The theoretical solutions are then compared with an approximate reduction formula which is proposed for design purposes. Available test results are compared with the theory as represented by this reduction formula.
Published Code | WRC |
---|---|
Published By | Welding Research Council |
Publication Date | 1966 |
Pages Count | 17 |
Language | English |
File Size | 419.8 KB |
Related products
-
WRC 145:1969
Part 1: Interpretive Report on Effect of Hydrogen in Pressure-Vessel Steels: Section I-Basic and Research…
-
ASME PTB 2 2022
ASME PTB-2-2022 Guide to Life Cycle Management of Pressure Equipment Integrity Published By Publication Date…
-
WRC 119:1967
Part 1: Interpretive Report on Pressure Vessel Heads Published By Publication Date Number of Pages…
-
WRC 412:1996
Challenges and Solutions in Repair Welding for Power and Process Plants Published By Publication Date…
-
WRC 086:1963
Welding of Steel at Low Ambient Temperatures Published By Publication Date Number of Pages WRC…
-
UT StateConstructionandFireCodesAct Amendment 2019
UT State Construction and Fire Codes Act Published By Publication Date Number of Pages UT…
-
BS 6465-2:1996
Sanitary installations – Code of practice for space requirements for sanitary appliances Published By Publication…
-
WRC volume 51 No. 03-04:1996
Progress Reports Volume 51 No. 03-04 Published By Publication Date Number of Pages WRC 1996…
-
BS 3019-2:1960:1961 Edition
General recommendations for manual inert-gas tungsten-arc welding. – Austenitic stainless and heat-resisting steels Published By…
-
WRC 140:1969
Fracture Toughness Characterization Procedures and Interpretations to Fracture-Safe Design for Structural Aluminum Alloys Published By…
-
WRC 116:1966
Long Range Plan for Pressure Vessel Research Published By Publication Date Number of Pages WRC…
-
BS 3939-5:1985
Graphical symbols for electrical power, telecommunications and electronics diagrams – Semiconductors and electron tubes Published…
-
WRC 318:1986
Part 1: Factors Influencing the Measurement of Ferrite Content in Austenitic Stainless Steel Weld Metal…
-
BS 638-7:1984
Arc welding power sources, equipment and accessories – Specification for safety requirements for installation and…
-
WRC 030:1956
Oxidation-Resistant Brazing Alloys Published By Publication Date Number of Pages WRC 1956 19
-
WRC 312:1986
Joining of Molybdenum Base Metals and Factors which Influence Ductility Published By Publication Date Number…
-
WRC 113:1966 (R1976)
Part 1: Photoelastic Study of the Stresses Near Openings in Pressure Vessels Published By Publication…
-
WRC 112:1966
Improvement of the Fatigue Life of Spotwelds Published By Publication Date Number of Pages WRC…
-
BS S 155:1976+A1:2016
Specification for nickel-silicon-chromium-molybdenum-vanadium steel (vacuum arc remelted) billets, bars, forgings and parts (1900-2100 MPa: limiting…
-
ASME BPVC III 3 2013
ASME BPVC – III – 3 -2013 BPVC Section III, Rules for Construction of Nuclear…
-
CA 2022 California Residential Code Approved Express Terms COMPLETE
California Residential Code Approved Express Terms Published By Publication Date Number of Pages CA 2022…
-
BS EN 499:1995
Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain…
-
WRC 111:1966
Interpretive Report on Weld-Metal Toughness Published By Publication Date Number of Pages WRC 1966 44
-
WRC 125:1967
Analysis of In-Plane T, Y and K Welded Tubular Connections Published By Publication Date Number…
-
WRC 135:1968
Cyclic Pressure Tests of Full-Size Pressure Vessels Published By Publication Date Number of Pages WRC…
-
WRC volume 41 No. 07-08:1986
Progress Reports Volume 41 No. 07-08 Published By Publication Date Number of Pages WRC 1986…
-
WRC 105:1965
Arc Spot Welding Published By Publication Date Number of Pages WRC 1965 33
-
WRC volume 51 No. 05-06:1996
Progress Reports Volume 51 No. 05-06 Published By Publication Date Number of Pages WRC 1996…
-
ASTM-A381:1996 Edition
A381-96 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems Published By…
-
BS 1515-1:1965:1969 Edition
Fusion welded pressure vessels for use in the chemical, petroleum and allied industries Published By…
-
BS 1515-2:1968
Fusion welded pressure vessels for use in the chemical, petroleum and allied industries – Austenitic…
-
WRC 110:1965
Part 1: Experiments on High Strength Steel Members Published By Publication Date Number of Pages…
-
WRC 114:1966
Joining of Plastics Published By Publication Date Number of Pages WRC 1966 18
-
WRC 103:1965
Welding of Age-Hardenable Stainless Steels Published By Publication Date Number of Pages WRC 1965 31
-
WRC 069:1961 (R1976)
Part 1: The Effects of Internal Pressure on Thin-Shell Pressure Vessel Heads Published By Publication…
-
BS 6323-7:1982
Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes –…
-
WRC 117:1966
Static Tests on Longitudinally Stiffened Plate Girders Published By Publication Date Number of Pages WRC…
-
WRC 118:1966
Fatigue Tests of Large-Size Welded Plate Girders Published By Publication Date Number of Pages WRC…
-
ASME NTB 2 2019
ASME – NTB – 2 -2019 Background Information for Addressing Adequacy or Optimization of ASME…
-
CSA C22.2 NO. 39-13:2013 Edition
Fuseholder assemblies Published By Publication Date Number of Pages CSA 2013-03-01 36