11.140 – Hospital equipment – PDF Standards Store

NZS 7122:1980

Wed, 06 Nov 2024 05:13:26 +0000

Specification for accessories for use with hospital beds

Published By	Publication Date	Number of Pages
SNZ	1980-11-30	16

NZS 7121:1979

Wed, 06 Nov 2024 05:13:25 +0000

Specification for hospital beds

Published By	Publication Date	Number of Pages
SNZ	1979-05-31	24

NZS 5226:1987

Wed, 06 Nov 2024 05:12:31 +0000

Provides a series of tests directly related to the impacts and loads encountered in everyday use. The ability of the wheelchair to withstand these tests provides the buyer with the knowledge that the purchase will stand up to the rigors of service expected. The wheelchair designer and manufacturer will use the tests as strength and stability standards to be met by the product. Wheelchair importers or exporters are provided with a performance specification on which their purchasing contracts can be based.

JIS T 9254:2015

Wed, 06 Nov 2024 02:55:47 +0000

This Standard specifies the electrically operated nursing beds for home use (hereafter referred to as the "beds"), which are capable of stepless adjustment of the angle of the back and leg sections and/or platform height It is not applicable to ordinary beds, bunk beds, beds for children, sofa beds and beds for hospitals

NOTE: The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows.

IEC 60601-2-52 : 2009 Medical electrical equipment – Part 2-52 : Particular requirements for the basic safety and essential performance of medical beds (MOD)

In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21-1.

JIS T 9254:2015/Amendment 1:2016

Wed, 06 Nov 2024 02:55:47 +0000

Electrically operated adjustable bed for home use (Amendment 1)

Published By	Publication Date	Number of Pages
JIS	2016-08-22	8

JIS T 9205:2016

Wed, 06 Nov 2024 02:55:30 +0000

This Standard specifies the manually and electrically operated nursing beds principally intended for use in medical facilities (hereafter referred to as beds) that are capable of stepless adjustment of the angle of the back and leg sections, platform height and/or inclination of the whole bottom.

This Standard is also applicable to the flat floor type beds without the adjusments mechanism.

It is not applicable to the beds for medical care, the beds for children, the beds for a particular function and the electrically operated adjustable beds for home use.

NOTE 1 The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows.

IEC 60601-2-52 : 2009 Medical electrical equipment – Part 2-52 : Particular requirements for the basic safety and essential performance of medical beds and Amendment 1 : 2015 (MOD)

NOTE 2 The beds for a particular function refer to those beds with other function (such as rolling function and delivery rable function) then the function of manual or mechanical stepless adjustment of the angle of the back and leg sections and/or platform height.

NOTE 3 The beds for medical care refer to those beds that are registered as medical devices in accordance with the Act on Pharmaceuticals and Medical Devices.

JIS T 9205:2009

Wed, 06 Nov 2024 02:55:29 +0000

Hospital bed

Published By	Publication Date	Number of Pages
JIS	2009-03-20	42

JIS T 9107:2018

Wed, 06 Nov 2024 02:55:21 +0000

This Standard specifies requirements for single-use sterile rubber surgical gloves (hereafter referred to as gloves) intended for use in medical and dental surgical procedures to protect the patient and the user from cross-contamination

NOTE 1 JIS T 9107:2011 may be applied until February 28, 2021

NOTE 2 The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows.

ISO 10282: 2014 Single-use sterile rubber surgical gloves-Specification (MOD)

JIS T 8062:2010

Wed, 06 Nov 2024 02:54:48 +0000

This Standard describes a laboratory test method for face masks that protect against contact with the blood expelled from blood vessels or other body fluids.

The test liquid is synthetic blood that simulates blood, etc.

This Standard describes a test method for resistance of face masks to penetration by a splash.

The purpose of this Standard is primarily to clarify the test method of materials or certain material constructions used in face masks.

This test method does not address the performance of the face masks design, construction, interfaces or other factors which may affect the overall protection (such as filtration efficiency and pressure drop).

This test method does not evaluate the performance of face masks as a protection against contamination via airborne exposure pathways or in the prevention of the penetration of aerosolized body fluids deposited on the face mask.

NOTE: The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows.

ISO 22609 : 2004 Clothing for protection against infectious agentsMedical face masks-Test method for resistance against penetration by synthetic blood (fixed volume~ horizontally projected) (MOD)

In addition, symbols, which denote the degree of correspondence in the contents between the relevant International Standard and JIS, are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/lEC Guide 21-1.

JIS T 1022:2006

Wed, 06 Nov 2024 02:52:15 +0000

Safety Requirements of Electrical Installations for Medically Used Rooms in Hospitals and Clinics

Published By	Publication Date	Number of Pages
JIS	2006-02-20	21