23.020.01 – Fluid storage devices in general – PDF Standards Store ?u= Tue, 05 Nov 2024 15:41:07 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png 23.020.01 – Fluid storage devices in general – PDF Standards Store ?u= 32 32 DIN EN 13799:2020 Edition ?u=/product/publishers/din/din-en-13799/ Tue, 05 Nov 2024 15:41:07 +0000 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels (Draft)
Published By Publication Date Number of Pages
DIN 2020-06 72
]]> This European Standard specifies minimum requirements for design and testing of contents gauges, which are directly connected to transportable tanks, drums, cylinders and static LPG tanks above 0,5 l water capacity excluding those used for automotive containers. This European Standard does not apply to refineries or other process plants.

]]> DIN EN 13160-4:2016 Edition ?u=/product/publishers/din/din-en-13160-4/ Tue, 05 Nov 2024 15:35:14 +0000 Leckanzeigesysteme - Teil 4: Anforderungen und Prüf-/Bewertungsmethoden für sensorbasierte Leckanzeigesysteme
Published By Publication Date Number of Pages
DIN 2016-12 41
]]> Diese Europäische Norm legt Anforderungen und die einschlägigen Prüf-/Bewertungsverfahren an Leckanzeigesysteme, die auf der Feststellung der Anwesenheit von Flüssigkeit und/oder Dampf in Überwachungsräumen, Leckageräumen oder Überwachungsschächten basieren, fest. Die Systeme bestehen in der Regel aus: – Messfühlereinrichtung(en); – Auswerteeinrichtung; – Alarmeinrichtung. Diese Europäische Norm wurde unter dem Mandat M/131 "Rohrleitungen, Tanks und Zubehörteile, die nicht mit Wasser, das für die menschliche Ernährung bestimmt ist, in Kontakt kommen" unter der Verordnung (EU) Nr. 305/2011 des Europäischen Parlaments und Rates vom 9. März 2011 zur Festlegung harmonisierter Bedingungen für die Vermarktung von Bauprodukten erarbeitetet.*Inhaltsverzeichnis

]]> DIN EN 13160-7:2016 Edition ?u=/product/publishers/din/din-en-13160-7/ Tue, 05 Nov 2024 15:35:14 +0000 Leckanzeigesysteme - Teil 7: Anforderungen und Prüf-/Bewertungsmethoden für Überwachungsräume, Leckschutzauskleidungen und Leckschutzummantelungen
Published By Publication Date Number of Pages
DIN 2016-12 56
]]> Diese Europäische Norm legt Anforderungen und die einschlägigen Prüf-/Bewertungsverfahren an Leckschutzauskleidungen und Leckschutzummantelungen fest. Leckschutzauskleidungen und Leckschutzummantelungen sind für den Einsatz zur nachträglichen Schaffung eines Überwachungsraums oder eines Leckageraums in einwandigen, unterirdischen oder oberirdischen, nicht druckbeaufschlagten Tanks vorgesehen, die für wassergefährdende Flüssigkeiten ausgelegt sind. Das System ist ausschließlich in Verbindung mit den von prEN 13160-2 bis prEN 13160-4 abgedeckten Leckanzeigern zu verwenden. Diese Europäische Norm wurde unter dem Mandat M/131 "Rohrleitungen, Tanks und Zubehörteile, die nicht mit Wasser, das für die menschliche Ernährung bestimmt ist, in Kontakt kommen" unter der Verordnung (EU) Nr. 305/2011 des Europäischen Parlaments und Rates vom 9. März 2011 zur Festlegung harmonisierter Bedingungen für die Vermarktung von Bauprodukten erarbeitetet.*Inhaltsverzeichnis

]]> DIN EN 13160-6:2016 Edition ?u=/product/publishers/din/din-en-13160-6/ Tue, 05 Nov 2024 15:35:14 +0000 Leak detection systems - Part 6: Sensors in monitoring wells
Published By Publication Date Number of Pages
DIN 2016-12 9
]]> This European Standard gives specifies the requirements for leak detection systems – class V for use with systems designed for fuels which are flammable, having a flash point up to but not exceeding 100 °C. Systems of class V may detect liquid loss in tanks or pipes below the liquid level. Product will enter the environment before the leak is detected (i. e. sensors in monitoring wells).

]]> DIN EN 13160-3:2016 Edition ?u=/product/publishers/din/din-en-13160-3/ Tue, 05 Nov 2024 15:35:13 +0000 Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
Published By Publication Date Number of Pages
DIN 2016-12 50
]]> This European Standard gives requirements and the corresponding test/assessment methods applicable to leak detection kits based on the drop of the liquid level in the leak detection kits header tank. Leak detection kits are intended to be used with double skin, underground or above ground, non-pressurized, tanks designed for water polluting liquids. The kits are usually composed of: – sensing device; – evaluation device; – alarm device. This European Standard was worked out under the Mandate M/131 "Pipes, tanks and ancillaries not in contact with water for human consumption" under the Regulation (EU) No 305/2011 of the European Parliament and the Council 9 March 2011 laying down harmonised conditions for the marketing of construction products.

]]> DIN EN 13160-1:2016 Edition ?u=/product/publishers/din/din-en-13160-1/ Tue, 05 Nov 2024 15:35:12 +0000 Leak detection systems - Part 1: General Principles
Published By Publication Date Number of Pages
DIN 2016-12 24
]]> This European Standard specifies the general principles for leak detection systems for use with double-skin tanks, single-skin tanks and pipework designed for water polluting fluids. This part supported the part 2, 3, 4, 5, and 7 of EN 13160 which are worked out under the Mandate M/131 "Pipes, tanks and ancillaries not in contact with water for human consumption" under the Regulation (EU) No 305/2011 of the European Parliament and the Council 9 March 2011 laying down harmonised conditions for the marketing of construction products.

]]> DIN EN 13160-2:2016 Edition ?u=/product/publishers/din/din-en-13160-2/ Tue, 05 Nov 2024 15:35:12 +0000 Leckanzeigesysteme - Teil 2: Anforderungen und Prüf-/Bewertungsmethoden für Über- und Unterdrucksysteme
Published By Publication Date Number of Pages
DIN 2016-12 68
]]> Diese Europäische Norm legt die Anforderungen und die einschlägigen Prüf-/Bewertungsverfahren an Leckanzeiger (Leckdetektoren), die auf der Messung der Druckänderung basieren, fest. Leckanzeiger sind für den Einsatz an doppelwandigen, unterirdischen oder oberirdischen, druckbeaufschlagten oder nicht druckbeaufschlagten Tanks oder Rohrleitungen für wassergefährdende Flüssigkeiten/Fluide bestimmt. Die Leckanzeiger bestehen in der Regel aus: – Messeinrichtung; – Auswerteeinrichtung; – Alarmeinrichtung; – Druckerzeuger; – Überdruckventil; – Flüssigkeitssperre; – Kondensatgefäß. Diese Europäische Norm wurde unter dem Mandat M/131 "Rohrleitungen, Tanks und Zubehörteile, die nicht mit Wasser, das für die menschliche Ernährung bestimmt ist, in Kontakt kommen" unter der Verordnung (EU) Nr. 305/2011 des Europäischen Parlaments und Rates vom 9. März 2011 zur Festlegung harmonisierter Bedingungen für die Vermarktung von Bauprodukten erarbeitetet.*Inhaltsverzeichnis

]]> AS/NZS 4766:2020 ?u=/product/publishers/as/as-nzs-47662020/ Tue, 05 Nov 2024 13:41:44 +0000 Rotationally moulded buried, partially buried and non-buried storage tanks for water and chemicals
Published By Publication Date Number of Pages
AS 2020-06-26 51
]]> This Standard specifies requirements for the design and manufacture of storage tanks that are rotationally moulded in one-piece single or multi-layer seamless construction.

]]> AS 4289:1995 (R2016) ?u=/product/publishers/as/as-42891995-r2016/ Tue, 05 Nov 2024 12:56:10 +0000 Oxygen and acetylene gas reticulation systems
Published By Publication Date Number of Pages
AS 1995-08-05 53
]]> Specifies the requirements for the safe use and proper design of a gas reticulation system, together with precautions that are necessary during the construction, operation and maintenance of reticulation systems carrying both oxygen and acetylene gases. Highlights the precautions necessary when the end-use equipment is connected for operation in a closed workshop or open-site area.

Scope

This Standard specifies requirements for the design, assembly, installation, testing, operation and maintenance of gaseous oxygen and acetylene piping, manifolds and equipment used for the reticulation of these gases in industrial and laboratory applications. It does not apply to oxygen used for breathing purposes. Also, it does not apply to oxygen and acetylene cylinders on carts. The Standard applies to the following:
(a) Piping sizes up to 38 mm NB for industrial grade oxygen at pressures not exceeding 2100 kPa, and supplied either from high-pressure (H.P.) oxygen cylinders fitted with connections which comply with AS 2473, or from an oxygen vaporizer fed from a liquid oxygen storage vessel.
(b) Piping sizes up to 32 mm NB for acetylene within the allowable pressure range for the particular NB of the piping being used, and not exceeding 150 kPa. Supply of acetylene into the piping shall be from cylinders. Piping in Items (a) and (b) shall comply with AS 4041. Future direction concerning larger piping sizes beyond those indicated in the Scope will need guidance from industry (see Preface).

]]> AS 2872:2000 (R2016) ?u=/product/publishers/as/as-28722000-r2016/ Tue, 05 Nov 2024 12:45:43 +0000 Atmospheric heating of vessels containing fluids - Estimation of maximum temperature
Published By Publication Date Number of Pages
AS 2000-04-03 45
]]> Specifies a method for calculating temperatures and corresponding vapour pressures of fluids in vessels subject to atmospheric heating in the hottest month of the year in various locations around Australia. The method is applicable to stationary and transport vessels containing compressed liquefied gases, permanent gases and liquids having a viscosity not exceeding approximately 1 Pa.s.

Scope

This Standard sets out a method for calculating temperatures and the corresponding vapour pressures of fluids in vessels subject to atmospheric heating in the hottest month of the year in various locations around Australia. It is primarily intended for compressed liquefied gases stored in steel containers, and is equally applicable to stationary as well as transport vessels. Because the method is quite general it may also be used for permanent gases and liquids, provided that the liquids are not too viscous (upper limit approximately 1 Pa.s). It may also be used for above-ground pipelines. Some characteristic properties of a number of fluids are shown graphically in Appendix A.
NOTES:
1 Sample calculations are shown in appendix B.
2 The theoretical background for the method given in this Standard is given in Appendix C.

]]>