23.060.99 – Other valves – PDF Standards Store

JIS B 2032:1995

Wed, 06 Nov 2024 01:47:10 +0000

Wafer Type Rubber-Seated Butterfly Valves

Published By	Publication Date	Number of Pages
JIS	1995-03-01	18

ISO 16138:2006

Tue, 05 Nov 2024 21:48:56 +0000

ISO 16138:2006 specifies requirements for the design, functional characteristics and manufacture of diaphragm valves made of thermoplastics materials intended for isolating and control service, their connection to the pipe system, the body materials and their pressure/temperature rating between -40 degrees Celsius and +120 degrees Celsius, for a lifetime of 25 years, and also specifies their tests.

ISO 16138:2006 is applicable to hand- or power-operated valves to be installed in industrial pipe systems, irrespective of the field of application and the fluids to be conveyed.

It is concerned with the range of DN 8, DN 10, DN 15, DN 20, DN 25, DN 32, DN 40, DN 50, DN 65, DN 80, DN 100, DN 125, DN 150, DN 200 and DN 250, and the range of PN 6, PN 10, PN 16 and Class 150.

ISO 16136:2006

Tue, 05 Nov 2024 21:48:54 +0000

L'ISO 16136:2006 spécifie les exigences concernant la conception, les caractéristiques fonctionnelles et la fabrication des robinets à papillon en matériaux thermoplastiques destinés à des fonctions de sectionnement et de régulation, leur raccordement aux réseaux de tuyauteries, les matériaux du corps et leurs relations pression/température dans la plage de températures – 40 °C à + 120 °C, pour une durée de vie standard de 25 ans, et spécifie également leurs essais.

L'ISO 16136:2006 s'applique aux appareils de robinetterie actionnés manuellement ou motorisés destinés à être installés dans des réseaux de tuyauteries industrielles, indépendamment du domaine d'application et des fluides véhiculés.

L'ISO 16136:2006 concerne la gamme de DN suivante: DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500 et DN 600; et la gamme de PN et de Class suivante: PN 6; PN 10; PN 16 et Class 150.

ISO 10631:2013

Tue, 05 Nov 2024 20:33:53 +0000

ISO 10631:2013 specifies requirements for design, materials (e.g. steel, cast iron, ductile iron, copper alloy), pressure/temperature ratings, and testing for butterfly valves having metallic bodies for use in general purpose flanged or butt welding piping systems.

ISO 10631:2013 covers butterfly valves of the following nominal sizes, DN and NPS:

DN 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500 (550); 600 (650); 700; 750; 800; 900; 1 000; 1 200; 1 400; 1 600; 1 800; 2 000; 2 200; 2 400;
NPS 1 1/2; 2; 2 1/2; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; (22); 24; (26); 28; 30; 32; 36; 40; 48; 56; 64; 72; 80; 88; 96.

ISO 10631:2013 is applicable to butterfly valves of the following pressure designations, PN and class:

PN 2,5; 6; 10; 16; 25; 40;
class 125; 150; 300.

ISO 10631:1994

Tue, 05 Nov 2024 20:33:53 +0000

Specifies the requirements for metallic butterfly valves with centred or eccentric disc, with centred or eccentric shaft, with metallic, polymeric, elastomeric or composite seating, with lined or unlined body, coated or uncoated, to be used in flanged or butt-welded piping systems for shut-off, throttling or flow control. Covers butterfly valves with nominal diameters DN 40 to DN 2000 and is applicable to valves of nominal pressure PN 2,5 to 50.

ISO 10631:2021

Tue, 05 Nov 2024 20:33:53 +0000

This document specifies the general requirements for design, materials (e.g. steel, cast iron, ductile iron, copper alloy), pressure/temperature ratings and testing for butterfly valves having metallic bodies for use in flanged or butt-welding piping systems.

This document applies to metallic butterfly valves used for all industrial applications.

Additional requirements given in the relevant application standards can apply to butterfly valves used for more specific applications (e.g. for the water industry, the chemical and petrochemical process industry, the oil and gas industry).

This document covers butterfly valves of the following nominal sizes, DN and NPS:

— DN 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; (550); 600; (650); 700; 750; 800; 900; 1 000; 1 050; 1 200; 1 400; 1 500; 1 600; 1 800; 2 000; 2 200; 2 400.

— NPS 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; (22); 24; (26); 28; 30; 32; 36; 40; 42; 48; 54; 56; 60; 64; 66; 72; 78; 80; 84; 88; 90; 96.

This document is applicable to butterfly valves of the following pressure designations, PN and Class:

— PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100;

— Class 25, 125; 150; 250; 300; 600.

NOTE 1 It is possible that the nominal sizes listed are not available for all pressure designations.

NOTE 2 Nominal sizes listed in parenthesis are not common industry sizes, but are used in some application standards.

ISA 75.10.02-2014

Tue, 05 Nov 2024 20:18:56 +0000

Full Description

This document applies to valves, sizes NPS 1/2 (DN 15) through NPS 26 (DN 650), of the clamp or pinch valve design incorporating clamp or pinch elements.

Purpose

The purpose of this document is to aid users in piping design by providing installed face -to-face dimensions for control valves that incorporate clamp or pinch elements and have flanges that mate with ANSI B16.1 Class 125 and/or ANSI B16.5 Class 150 flanges.

This document also applies to handwheel-operated pinch valves, which have flanges that mate with Classes 125 and 150, but excludes solenoid-actuated valves and direct fluid-actuated valves.

Due to the extensive variety in applications for pinch valves, it is not reasonable to standardize on only one set. Some applications are better suited to a shorter face-to-face, whereas others need extra length. Users of pinch valves are advised to discuss with the pinch valve manufacturers based on their requirements, their unique process conditions, and the type of elastomer or rubber used.

All face-to-face dimensions in this document have been applied successfully throughout industry.

ISA 75.10.01-2013

Tue, 05 Nov 2024 20:18:56 +0000

Full Description

This document applies to valves, sizes 1 inch through 26 inches, of the clamp or pinch valve design, incorporating clamp or pinch elements.

The purpose of this document is to establish requirements for clamp or pinch valves.
The following requirements are established:

a) Tests for pressure retaining parts and shutoff integrity prior to shipment

b) Marking requirements

c) Procedures for determining the flow coefficient and other related sizing factors

This document excludes solenoid actuated valves and direct fluid actuated valves.

ISA 75.10.03-2015

Tue, 05 Nov 2024 20:18:56 +0000

Installed Face-to-Face Dimensions for Shell and Tube Flanged Pinch Valves (Classes 125 and 150)

Published By	Publication Date	Number of Pages
ISA	2015-01-21	14

ISA 75.08.06-2002 (R2007)

Tue, 05 Nov 2024 20:18:51 +0000

Full Description

Formerly ANSI/ISA?75.16?1994

This standard applies to flanged globe-style control valves, sizes 15 mm (1/2 inch) through 450 mm
(18 inches), having top, top and bottom, port, or cage guiding.

The purpose of this standard is to aid users in their piping design by providing Classes 900, 1500,
and 2500, flanged globe-style control valve dimensions, without giving special consideration to the
equipment manufacturer to be used.

The short-long dimensions provided in Table 1 clarify 2.1 by consolidating the diversity of existing
manufacturers? lengths into two sets of dimensions for each valve size. Before using either the short or
long dimension, the piping designer should confirm with the selected valve manufacturer which dimension
is correct for the valve(s) being supplied.