25.080.99 – Other machine tools – PDF Standards Store

ISO 14137:2015

Tue, 05 Nov 2024 21:22:38 +0000

ISO 14137:2015 spécifie, en faisant référence à l'ISO 230-1, l'ISO 230-2 et l'ISO 230-4, les essais géométriques, les essais d'exactitude et de répétabilité de positionnement des axes à commande numérique, les essais d'usinage et les essais de circularité pour les machines d'électroérosion à fil (fil EDM), d'usage général et d'exactitude normale. Elle spécifie également les tolérances applicables correspondant aux essais mentionnés ci-dessus.

ISO 14137:2015 est applicable aux machines de type à bancs en croix et aux machines de type à deux montants.

ISO 14137:2015 ne traite que de la vérification de l'exactitude de la machine. Elle ne s'applique ni à l'examen du fonctionnement de la machine (vibrations, bruits anormaux, points durs dans les déplacements de composants, etc.) ni à la vérification de ses caractéristiques (telles que vitesses, avances, etc.), qu'il convient en général de vérifier avant de soumettre l'exactitude à l'essai.

ISO 14137:2015 donne la terminologie utilisée pour les principaux composants de la machine et la désignation des axes en référence à l'ISO 841:2001.

ISO 14137:2000

Tue, 05 Nov 2024 21:22:37 +0000

Machine tools — Test conditions for wire electrical-discharge machines (wire EDM) — Terminology and testing of the accuracy

Published By	Publication Date	Number of Pages
ISO	2000-04	28

IEC 61029-2-12:2010

Tue, 05 Nov 2024 19:12:42 +0000

Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines

Published By	Publication Date	Number of Pages
IEC	2010-05-26	30

BS ISO 14137:2015 – TC:2020 Edition

Sat, 19 Oct 2024 17:54:10 +0000

PDF Catalog

PDF Pages	PDF Title
56	Foreword
57	Introduction
59	1 Scope 2 Normative references 3 Terms and definitions
60	4 Terminology and designation of axes 4.1 Cross-slide table type
61	4.2 Double-column type
62	5 Preliminary remarks 5.1 Measurement units 5.2 Reference to ISO 230‑1 5.3 Machine levelling 5.4 Testing sequence 5.5 Tests to be performed
63	5.6 Measuring instruments 5.7 Diagrams 5.8 Software compensation 5.9 Minimum tolerance 5.10 Positioning tests and reference to ISO 230‑2 5.11 Machining test 5.12 Circular test and reference to ISO 230‑4
64	6 Geometric tests 6.1 Linear axes of motion
68	6.2 Workholding frame
70	6.3 Motion of U- and V-axes
72	7 Checking of accuracy and repeatability of numerically controlled positioning axes
77	8 Machining test
78	9 Circular test
79	Bibliography

BS ISO 14137:2015

Sat, 19 Oct 2024 17:51:32 +0000

This International Standard specifies, with reference to ISO 230-1, ISO 230-2, and ISO 230-4, geometric tests, tests of accuracy and repeatability of numerically controlled positioning axes, machining test and circular test for general purpose and normal-accuracy wire electro-discharge machines (wire EDM). It also specifies the applicable tolerances, corresponding to the above-mentioned tests.

This International Standard is applicable to cross-slide table type machines and double-column type machines.

This International Standard deals only with the verification of accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.) nor to the checking of its characteristics (such as speeds, feeds, etc.), which should generally be checked before the testing of the accuracy.

This International Standard provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841.

PDF Catalog

PDF Pages	PDF Title
6	Foreword
7	Introduction
9	1 Scope 2 Normative references 3 Terms and definitions
10	4 Terminology and designation of axes 4.1 Cross-slide table type
11	4.2 Double-column type
12	5 Preliminary remarks 5.1 Measurement units 5.2 Reference to ISO 230‑1 5.3 Machine levelling 5.4 Testing sequence 5.5 Tests to be performed
13	5.6 Measuring instruments 5.7 Diagrams 5.8 Software compensation 5.9 Minimum tolerance 5.10 Positioning tests and reference to ISO 230‑2 5.11 Machining test 5.12 Circular test and reference to ISO 230‑4
14	6 Geometric tests 6.1 Linear axes of motion
18	6.2 Workholding frame
20	6.3 Motion of U- and V-axes
22	7 Checking of accuracy and repeatability of numerically controlled positioning axes
27	8 Machining test
28	9 Circular test
29	Bibliography

BS 4656-26:1980

Sat, 19 Oct 2024 17:44:46 +0000

This Part of this British Standard specifies, with reference to BS 3800, both geometrical and practical tests for gear shaping machines, horizontal and vertical spindle types, having a workpiece diameter capacity of up to 1 600 mm, used for the production of external and internal spur and helical gears, and gives the corresponding permissible deviations which apply. It applies only to machines which use pinion type cutters. These cutters have a rotary motion.

This standard is applicable to machines of high accuracy and to machines of general purpose use and normal accuracy.

It deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to its characteristics (speeds, feeds, etc.) which should generally be checked before testing accuracy.

Accuracy requirements and geometrical tests with reference to BS 3800.

BS EN 61029-2-12:2011

Sat, 19 Oct 2024 14:39:41 +0000

IEC 61029-2-12:2010 applies to machines for creating external threads that either rotate the work piece or the cutting head.

PDF Catalog

PDF Pages	PDF Title
18	1 Scope 2 Definitions 3 General requirement 4 General notes on tests 5 Rating
19	6 Classification 7 Marking
23	8 Protection against electric shock 9 Starting 10 Input and current 11 Heating
24	12 Leakage current 13 Radio and television interference suppression 14 Protection against ingress of foreign bodies and moisture resistance 15 Insulation resistance and electric strength 16 Endurance 17 Abnormal operation 18 Stability and mechanical hazards 19 Mechanical strength 20 Construction
25	21 Internal wiring 22 Components 23 Supply connection and external flexible cables and cords 24 Terminals for external conductors 25 Provision for earthing 26 Screws and connections 27 Creepage distances, clearances and distances through insulation 28 Resistance to heat, fire and tracking 29 Resistance to rusting
26	30 Radiation
27	Annexes Annex A (normative) Normative references