27.180 – Wind turbine energy systems – PDF Standards Store ?u= Wed, 06 Nov 2024 05:13:21 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png 27.180 – Wind turbine energy systems – PDF Standards Store ?u= 32 32 NZS 6808:2010 ?u=/product/publishers/snz/nzs-68082010/ Wed, 06 Nov 2024 05:13:21 +0000 Acoustics - Wind farm noise
Published By Publication Date Number of Pages
SNZ 2010-02-28 48
]]> Provides suitable methods for the prediction, measurement, and assessment of sound from wind turbines. These methods may be applied during the processes of planning and developing a wind farm, then for confirming compliance with resource consent conditions covering sound levels, and also for the investigation and assessment of noise complaints about operating wind farms.

]]> ISO 16079-1:2017 ?u=/product/publishers/iso/iso-16079-12017/ Tue, 05 Nov 2024 21:48:15 +0000 Condition monitoring and diagnostics of wind turbines — Part 1: General guidelines
Published By Publication Date Number of Pages
ISO 2017-11 32
]]> ISO 16079-1:2017 gives guidelines which provide the basis for choosing condition monitoring methods used for failure mode detection, diagnostics and prognostics of wind power plant components.

]]> ISO 16079-2:2020 ?u=/product/publishers/iso/iso-16079-22020/ Tue, 05 Nov 2024 21:48:14 +0000 Surveillance et diagnostic des éoliennes de production d'électricité — Partie 2: Surveillance de la transmission
Published By Publication Date Number of Pages
ISO 2020-09 62
]]> Le présent document spécifie la mise en œuvre d'un système de surveillance d'état pour les éoliennes, en se centrant sur la surveillance de la transmission. Des recommandations pour une mise en œuvre pratique de l'AMDS sont présentées, de même que des recommandations pour la spécification des bonnes pratiques et des recommandations minimales concernant le système de surveillance d'état utilisé pour la détection des modes de défaillance, les diagnostics et les pronostics de la transmission directe et à engrenages des éoliennes, incluant:

a) le(s) palier(s) principal(ux);

b) le multiplicateur, le cas échéant;

c) la génératrice (aspects mécaniques).

Ceci inclut également les sous-composants tels que l'accouplement et le système de lubrification.

Le présent document fournit une vue d'ensemble des aspects importants relatifs à la surveillance d'état des éoliennes et fait référence à d'autres normes dans lesquelles des informations plus détaillées sont disponibles à propos des différents aspects.

]]> IEC/IEEE 60076-16:2018 ?u=/product/publishers/iec/iec-ieee-60076-162018/ Tue, 05 Nov 2024 20:14:42 +0000 Power transformers - Part 16: Transformers for wind turbine applications
Published By Publication Date Number of Pages
IEC 2018-09-28 26
]]> IEC/IEEE 60076-16:2018 applies to dry-type and liquid-immersed transformers for wind turbine step-up application having a winding with highest voltage for equipment up to and including 72,5 kV. This document applies to the transformer used to connect the wind turbine generator to the wind farm power collection system or adjacent distribution network and not the transformer used to connect several wind turbines to a distribution or transmission network. Transformers covered by this document comply with the relevant requirements prescribed in the IEC 60076 standards or IEEE C57 standards. This second edition of IEC/IEEE 60076-16 cancels and replaces IEC 60076-16:2011, and constitutes a technical revision. The main changes with respect to the previous edition are as follows:
1) relationship between transformer rated power and the output current from the associated generator is introduced;
2) thermal correction of the effective cooling medium has been introduced;
3) testing regime has been strengthened to ensure transformers are suitable for the harsh electrical environment to which they are subjected.

]]> IEC TS 63102:2021 ?u=/product/publishers/iec/iec-ts-631022021/ Tue, 05 Nov 2024 20:14:22 +0000 Grid code compliance assessment methods for grid connection of wind and PV power plants
Published By Publication Date Number of Pages
IEC 2021-09-03 42
]]> IEC TS 63102:2021(E) highlights recommended technical methods of grid code compliance assessment for grid connection of wind and PV power plants as the basic components of grid connection evaluation. The electrical behaviour of wind and PV power plants in this technical specification includes frequency and voltage range, reactive power capability, control performance including active power based control and reactive power based control, fault ride through capability and power quality.
Compliance assessment is the process of determining whether the electrical behaviour of wind and PV power plants meets specific technical requirements in grid codes or technical regulations. The assessment methods include compliance testing, compliance simulation and compliance monitoring. The input for compliance assessment includes relevant supporting documents, testing results and validated simulation models, and continuous monitoring data. The scope of this technical specification only covers assessment methods from a technical aspect; processes related to certification are not included.
This technical specification is applicable to wind and PV power plants connected to the electrical power grid.

]]> IEC TS 62257-9-6:2008 ?u=/product/publishers/iec/iec-ts-62257-9-62008/ Tue, 05 Nov 2024 20:11:30 +0000 Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-6: Integrated system - Selection of Photovoltaic Individual Electrification Systems (PV-IES)
Published By Publication Date Number of Pages
IEC 2008-09-19 40
]]> IEC 62257-9-6:2008(E) proposes a simple selection procedure and cheap, comparative tests which can be performed in laboratories of developing countries, in order to identify the most suitable model of small Photovoltaic Individual Electrification Systems (PV- IES) up to 500 Wp for a particular rural electrification project from a number of products submitted for test. The tests provided in IEC 62257-9-6 allow assessment of the performance of a PV-IES according to the requirement of the general specification of the project (see IEC/TS 62257-2) and to verify their ability to provide the required service.

]]> IEC TS 62257-9-6:2019 ?u=/product/publishers/iec/iec-ts-62257-9-62019/ Tue, 05 Nov 2024 20:11:30 +0000 Renewable energy and hybrid systems for rural electrification - Part 9-6: Integrated systems - Recommendations for selection of Photovoltaic Individual Electrification Systems (PV-IES)
Published By Publication Date Number of Pages
IEC 2019-09-26 40
]]> IEC 62257-9-6:2019 proposes a simple selection procedure and cheap, comparative tests which can be performed in laboratories of developing countries, in order to identify the most suitable model of small Photovoltaic Individual Electrification Systems (PV- IES) up to 500 Wp for a particular rural electrification project from a number of products submitted for test. The tests provided in IEC TS 62257-9-6 allow assessment of the performance of a PV-IES according to the requirement of the general specification of the project (see IEC/TS 62257-2) and to verify their ability to provide the required service. This second edition of IEC TS 62257-9-6 cancels and replaces the first edition published in 2008. The main technical changes with respect to the previous edition are as follows:
– Removal of the term "small" from the title of the publication and from description of rural electrification systems.
– Removal of the limits on system voltage and power; these recommendations apply to systems of all sizes.

]]> IEC TS 62257-9-4:2006 ?u=/product/publishers/iec/iec-ts-62257-9-42006/ Tue, 05 Nov 2024 20:11:25 +0000 Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-4: Integrated system - User installation
Published By Publication Date Number of Pages
IEC 2006-10-09 28
]]> IEC TS 62257-9-4:2006 Specifies the general requirements for the design and the implementation of a user's installation. Applies to single phase user's electrical installations with maximum power of 500 VA, in decentralized rural electrification systems.

]]> IEC TS 62257-9-3:2006 ?u=/product/publishers/iec/iec-ts-62257-9-32006/ Tue, 05 Nov 2024 20:11:24 +0000 Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-3: Integrated system - User interface
Published By Publication Date Number of Pages
IEC 2006-10-09 20
]]> Specifies the general requirements for the design and the implementation of the interface equipment within the user's installation which connects to a microgrid or the generating part of a standalone system.

]]> IEC TS 62257-9-1:2008 ?u=/product/publishers/iec/iec-ts-62257-9-12008/ Tue, 05 Nov 2024 20:11:23 +0000 Recommendations for small renewable energy and hybrid systems for rural electrification - Part 9-1: Micropower systems
Published By Publication Date Number of Pages
IEC 2008-09-09 58
]]> IEC 62257-9-1:2008(E) applies to a micropower plant which is the electric energy generation subsystem associated with a decentralized rural electrification system. It provides general requirements for the design, erection and operation of micropower plants and general requirements to ensure the safety of persons and property. The micropower plants covered by this specification are low-voltage a.c., three-phase or single-phase, with rated capacity less than, or equal to, 100 kVA.

]]>