31.260 – Optoelectronics. Laser equipment – PDF Standards Store ?u= Wed, 06 Nov 2024 05:13:00 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png 31.260 – Optoelectronics. Laser equipment – PDF Standards Store ?u= 32 32 NZS 5821.3:1981 ?u=/product/publishers/snz/nzs-5821-31981/ Wed, 06 Nov 2024 05:13:00 +0000 Laser safety - Plain language code of practice for the safe use of lasers in teaching
Published By Publication Date Number of Pages
SNZ 1981-09-29 12
]]> Explains the hazards and outlines precautions in the use of visible light lasers employed for demonstration and practical instruction purposes in secondary schools and universities.

]]> NZS 5821.2:1981 ?u=/product/publishers/snz/nzs-5821-21981/ Wed, 06 Nov 2024 05:12:58 +0000 Laser safety - Plain language code of practice for the safe use of lasers in surveying, levelling and alignment
Published By Publication Date Number of Pages
SNZ 1981-09-29 12
]]> Outlines precautions for using visible light lasers for surveying, levelling and alignment purposes.

]]> JIS C 8159-1:2013 ?u=/product/publishers/jis/jis-c-8159-12013/ Wed, 06 Nov 2024 02:05:55 +0000 Non-integrated linear LED lamps with GX16t-5 cap for general lighting services-Part 1: Safety specifications
Published By Publication Date Number of Pages
JIS 2013-04-22 41
]]> This Standard specifies the safety requirements of non-integrated linear LED lamps with GX16t-5 cap for general lighting services (hereafter referred to as "linear LED lamp").

This Standard is applicable to the following linear LED lamps:

— Rated wattage: 60 W or less

— Lamp voltage: 120 V ripple free d.c. or less

Cap: GX16t-5

This Standard is not applicable to linear LED lamps that use the conventional caps for a fluorescent lamp and integrate a control gear.

The linear LED lamps covered by this Standard are applicable to Class I luminaire and Class II luminaire which are the insulating classes of luminaire defined in JIS C 8105-1.

NOTE 1 The information for the design of control gear of linear LED lamp targeted in this Standard is given in Annex E, the information for the design of a lamp socket in Annex F, and the information for the design of a lamp luminaire in Annex G.

Furthermore, the relation between the positioning of a linear LED lamp and that of other LED modules, LED lamps, etc. is described in Annex H.

NOTE 2 "120 V ripple free d.c." means a DC system of 120 V DC of maximum peak voltage 140 V or less based on the definition of the sine wave ripple component of not more than 10 % (effective value).

]]> JIS C 8152-3:2013 ?u=/product/publishers/jis/jis-c-8152-32013/ Wed, 06 Nov 2024 02:05:52 +0000 Photometry of white light emitting diode for general lighting - Part 3: Measurement methods for lumen maintenance
Published By Publication Date Number of Pages
JIS 2013-07-22 20
]]> This Japanese Industrial Standard specifies the measurement methods for the lumen maintenance factor and the chromaticity change of a white light emitting diode (LED) for general lighting.

This method is also applicable to LED luminaires.

NOTE 1 There are an LED package, LED module, LED light engine, bulb-shaped LED lamp, etc. in the light sources to be tested.

NOTE 2 The measurement conditions for the lumen maintenance factor of LED module are specified in JIS C 8155, and these for the lumen maintenance factor of bulb-shaped LED lamp are specified in JIS C 8157, individually.

]]> JIS C 8152-2:2019 ?u=/product/publishers/jis/jis-c-8152-22019/ Wed, 06 Nov 2024 02:05:52 +0000 Photometry of white light emitting diode for general lighting-Part 2: LED modules and LED light engines
Published By Publication Date Number of Pages
JIS 2019-12-20 27
]]> This Standard specifies the methods for obtaining the total luminous flux and the quantities concerning the light source colour of white light emitting diode (LED) modules and LED light engines for general lighting (hereafter referred to as the light source under test), using an integrating sphere. This method is applicable to the photometry of double-capped linear LED lamp and LED luminaire.

The photometry of light sources for general lighting (including bulb-type LED lamps) shall be in accordance with JIS C 7801. Furthermore, see JIS C 8152-1 for the LED packages, and JIS C 8105-5 for the LED luminaires etc. using a light distribution measurement device.

]]> JIS C 8152-2:2012 ?u=/product/publishers/jis/jis-c-8152-22012/ Wed, 06 Nov 2024 02:05:51 +0000 Photometry of white light emitting diode for general lighting - Part 2: LED modules and LED light engines
Published By Publication Date Number of Pages
JIS 2012-06-20 25
]]> This Japanese Industrial Standard specifies the methods for obtaining the quantity concerning total luminous flux and light source colour of white light emitting diode (LED) modules and LED light engines for general lighting using an integrating sphere.

This method is also applicable to the photometry of an LED luminaire.

The photometry of light sources for general lighting (including bulb-shaped LED lamps) shall be in accordance with JIS C 7801.

The photometry of LED packages and the photometry of LED luminaires, etc. using goniophotometers shall be in accordance with JIS C 8152-1 and JIS C 8105-5, respectively.

]]> JIS C 8152-2:2012/Amendment 1:2014 ?u=/product/publishers/jis/jis-c-8152-22012-amendment-12014/ Wed, 06 Nov 2024 02:05:51 +0000 Photometry of white light emitting diode for general lighting-Part 2: LED modules and LED light engines (Amendment 1)
Published By Publication Date Number of Pages
JIS 2014-03-20 5
]]> Photometry of white light emitting diode for general lighting-Part 2: LED modules and LED light engines (Amendment 1)
Published By Publication Date Number of Pages
JIS 2014-03-20 5
]]> JIS C 8152-1:2019 ?u=/product/publishers/jis/jis-c-8152-12019/ Wed, 06 Nov 2024 02:05:50 +0000 Photometry of white light emitting diode for general lighting-Part 1: LED packages
Published By Publication Date Number of Pages
JIS 2019-12-20 41
]]> This Standard specifies the method for obtaining the luminous quantities such as CIE averaged LED intensity and total luminous flux, and the quantities concerning the light source colour of white light emitting diode (LED) packages for general lighting.

The photometry of light sources for general lighting (including bulb-type LED lamps) shall be in accordance with JIS C 7801. Furthermore, see JIS C 8152-2 for the photometry of LED modules and LED light engines, and JIS C 8105-5 for the photometry of LED luminaires etc. using a light distribution measurement device.

]]> JIS C 8152-1:2012/Amendment 1:2014 ?u=/product/publishers/jis/jis-c-8152-12012-amendment-12014/ Wed, 06 Nov 2024 02:05:50 +0000 Photometry of white light emitting diode for general lighting - Part 1: LED packages (Amendment 1)
Published By Publication Date Number of Pages
JIS 2014-03-20 4
]]> Photometry of white light emitting diode for general lighting - Part 1: LED packages (Amendment 1)
Published By Publication Date Number of Pages
JIS 2014-03-20 4
]]> JIS C 8152-1:2012 ?u=/product/publishers/jis/jis-c-8152-12012/ Wed, 06 Nov 2024 02:05:49 +0000 Photometry of white light emitting diode for general lighting - Part 1: LED packages
Published By Publication Date Number of Pages
JIS 2012-06-20 40
]]> This Japanese Industrial Standard specifies the method for obtaining the photometric quantity such as CIE averaged LED intensity and total luminous flux and the quantity concerning light source colour of white light emitting diode (LED) packages for general lighting.

In addition, the photometry of light sources for general lighting (including bulbshaped LED lamps) shall be in accordance with JIS C 7801.

Furthermore, see JIS C 8152-2 and JIS C 8105-5 for the photometry of LED modules and LED light engines and for the photometry of LED luminaires, etc. using goniophotometers, respectively.

]]>