This standard specifies the position, dimensions, and reproducing speed of the nominal 0.200-in (5.08-mm) magnetic audio record on 16-mm motion-picture film.

This standard specifies the size and location of that portion of 35- and 16-mm motion-picture film to be captured by a scanning device for 4:3 and 16:9 aspect ratio.

This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film with a BH-type perforation and a perforation pitch of either 0.1866 in or 0.1870 in (4.740 mm or 4.750 mm).

This standard specifies the position, dimensions, reproducing speed, and identity of the two-, three-, four-, or six-track magnetic audio records on 35-mm magnetic film, and one single-track record on 17.5-mm magnetic film. It also specifies the assignment of records to the various tracks on the magnetic coating on the film in relation to the direction of film travel.

(1.1) Specifications — This standard defines the location within which edge numbers will appear on 16-mm motion-picture film. The maximum interval between successive numbers is also specified. (1.2) Application — This standard applies to latent-image printing of edge numbers as well as to any other method of printing such as inking.

This standard specifies a method for designating the type of winding for rolls of single-row perforated and multiple-row, nonsymmetrically perforated motion-picture raw stock film in terms of the reference edge.

This standard specifies the cutting and perforating dimensions for 35-mm motion-picture film having two rows of 16-mm type perforations, one row near each edge of the 35-mm film, and a perforation pitch of either 0.2994 in or 0.3000 in (7.605 mm or 7.620 mm). The width of the 16-mm strip after processing and slitting is also specified.

This standard specifies the location and size of the printed picture and photographic sound track areas for both negative/positive and reversal contact printing operations. An opaque line should appear between picture and sound in the finished print. The dimensions given for picture-printed area and for the two widths of sound-printed area provide for an overlap of picture- and soundprinted areas, or for a gap between them. The specific aperture to be used for printing sound will be chosen to provide the desired black line, as dictated by the printing materials and processing conditions in use.

(1.1) This standard specifies the dimensions of the camera aperture image and the relative positions of the vertical and horizontal centerlines of the intended image area with respect to the reference edge and the perforations of the camera negative film for 65-mm 8/70 motion-picture cameras. (1.2) This standard also specifies the location of registration pins, the position of the emulsion and the normal frame rate.

(1.1) This standard specifies the dimensions of the camera aperture image and the relative positions of the vertical and horizontal centerlines of the intended image area with respect to the reference edge and the perforations of the camera negative film for 65-mm 15/70 motion-picture cameras. (1.2) This standard also specifies the position of the emulsion and the normal frame rate.