47.020.60 – Electrical equipment of ships and of marine structures – PDF Standards Store

JIS F 8801:1993

Wed, 06 Nov 2024 02:13:31 +0000

Shipbuilding -- Watertight cable glands for electric appliance

Published By	Publication Date	Number of Pages
JIS	1993-07-14	10

JIS F 8425:1962 (R1968)

Wed, 06 Nov 2024 02:13:28 +0000

Explosion-Proof Flash Lights for Marine Use (Dry Battery Type)

Published By	Publication Date	Number of Pages
JIS	1962-02-01	8

JIS C 3410:2018

Wed, 06 Nov 2024 02:00:18 +0000

This Standard specifies cables, flexible cords and insulated wires used for electrical installations in ships.

NOTE The International Standards corresponding to this Standard and the symbol of degree of correspondence are as follows.

IEC 60092-353 : 2011 Electrical installations in ships — Part 353 : Power cables for rated voltages 1 kV and 3 kV

IEC 60092-354 : 2014 Electrical installations in ships — Part 354 : Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

IEC 60092-360 : 2014 Electrical installations in ships — Part 360 : Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables

IEC 60092-376 : 2003 Electrical installations in ships — Part 376 : Gables for control and instrumentation circuits 150/250 V (300 V) (overall evaluation: MOD)

In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standards and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21-1.

JIS C 3410:2010

Wed, 06 Nov 2024 02:00:17 +0000

This Standard covers cables, flexible cords and insulated wiresused for electrical installations in ships.

NOTE: The International Standards corresponding to this Standard and the symbol of degree of correspondence are as follows :

IEC 60092-351 : 2004 Electrical installations in ships-Part 351 : Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables

IEC 60092-353 : 1995 Electrical installations in ships-Part 353 : Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 k V and 3 k V and Amendment 1 : 2001

IEC 60092-354 : 2003 Electrical installations in ships-Part 354 : Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um=7.2 kV) up to 30 kV (Um=36 kV)

IEC 60092-359 : 1987 Electrical installations in ships-Part 359 : Sheathing materials for shipboard power and telecommunication cables, and Amendment 1 : 1994 and Amendment 2 : 1999

IEC 60092-376 : 2003 Electrical installations in ships-Part 376 Cables for control and instrumentation circuits 150/250 V (300 V)

(Overall evaluation: MOD)

The symbols which denote the degree of correspondence in the contents between JIS and the corresponding International Standard are IDT (identical), MOD (modified) and NEQ (not equivalent) according to ISO/IEC Guide 21-1.

JIS C 3410:1987

Wed, 06 Nov 2024 02:00:16 +0000

Cables and Flexible Cords for Electrical Equipment of Ships

Published By	Publication Date	Number of Pages
JIS	1987-05-15	86

IEC/ISO/IEEE 80005-1:2012

Tue, 05 Nov 2024 20:15:03 +0000

IEC/ISO/IEEE 80005-1:2012(E) describes high voltage shore connection (HVSC) systems, on board the ship and on shore, to supply the ship with electrical power from shore. This standard is applicable to the design, installation and testing of HVSC systems and addresses:
– HV shore distribution systems;
– shore-to-ship connection and interface equipment;
– transformers/reactors;
– semiconductor/rotating convertors;
– ship distribution systems; and
– control, monitoring, interlocking and power management systems.
It does not apply to the electrical power supply during docking periods, e.g. dry docking and other out of service maintenance and repair.

IEC/IEEE 80005-2:2016

Tue, 05 Nov 2024 20:15:03 +0000

Alimentation des navires à quai - Partie 2: Systèmes de connexion à quai à haute et basse tensions - Description de l'interface de communication de données dédiées au suivi et contrôle

Published By	Publication Date	Number of Pages
IEC	2016-06-27	116

IEC/IEEE 80005-1:2019/AMD1:2022

Tue, 05 Nov 2024 20:15:03 +0000

Amendment 1 - Utility connections in port - Part 1: High voltage shore connection (HVSC) systems - General requirements

Published By	Publication Date	Number of Pages
IEC	2022-02-02	12

IEC/IEEE 80005-1:2019

Tue, 05 Nov 2024 20:15:01 +0000

IEC/IEEE 80005-1:2019 describes high-voltage shore connection (HVSC) systems, onboard the ship and on shore, to supply the ship with electrical power from shore. This document is applicable to the design, installation and testing of HVSC systems and addresses:
– HV shore distribution systems,
– shore-to-ship connection and interface equipment,
– transformers/reactors,
– semiconductor/rotating frequency convertors,
– ship distribution systems, and
– control, monitoring, interlocking and power management systems.
It does not apply to the electrical power supply during docking periods, for example dry docking and other out of service maintenance and repair. Additional and/or alternative requirements can be imposed by national administrations or the authorities within whose jurisdiction the ship is intended to operate and/or by the owners or authorities responsible for a shore supply or distribution system. It is expected that HVSC systems will have practicable applications for ships requiring 1 MVA or more or ships with HV main supply. Low-voltage shore connection systems are not covered by this document. This second edition cancels and replaces the first edition published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) modification of 4.1, Figure 1: transformer on ship is optional, earthing switches on ship removed;
b) 4.2.2 and new item 11.3: alternative procedure of periodic testing added;
c) modification of 4.9:
– minimum current value in the safety circuits shall be 50 mA;
– opening of safety loop shall cause the automatic opening of ship and shore HVSC circuit breakers in a maximum time of 200 ms;
d) modification of 5.2: added Figure on harmonic contents;
e) modification of 6.2.3:
– earthing transformer with resistor can be used also on the secondary side;
– neutral earthing resistor rating in amperes shall be minimum 25 A, 5 s;
f) modification of all annexes: the safety circuits shall be mandatory;
g) modification of A.2.1: a metallic shield shall be installed at least on the power cores or common on pilot wires;
h) modification of B.7.2.1: new safety circuit introduced: single line diagram and description;
i) modification of C.4.1: SLD for cruise ships was updated, also the safety circuits to be coherent with main body, IEC symbols and introduced more details about the control socket-outlets and plugs manufacturer type;
j) modification of C.7.3.1:
– shore power connector pin assignment is updated;
– all cruise ships shall use 4 cables in all cases;
k) added D.6.1: the supply point on shore can be fixed or movable;
l) modification of D.7.3.2: the voltage used in the pilot circuit for container ships shall be less than 60 V DC or 25 V AC.
m) added D.8.6 and D.9.3.1: automatic restart and synchronization alternatives;
n) Annex E set to informative;
o) Annex F set to informative.

IEC/IEEE 61886-1:2021

Tue, 05 Nov 2024 20:14:48 +0000

Subsea equipment - Part 1: Power connectors, penetrators and jumper assemblies with rated voltage from 3 kV (Umax = 3,6 kV) to 30 kV (Umax = 36 kV)

Published By	Publication Date	Number of Pages
IEC	2021-04-20	100