65.060.35 – Irrigation and drainage equipment – PDF Standards Store ?u= Wed, 06 Nov 2024 05:12:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png 65.060.35 – Irrigation and drainage equipment – PDF Standards Store ?u= 32 32 NZS 5103:1973 ?u=/product/publishers/snz/nzs-51031973/ Wed, 06 Nov 2024 05:12:27 +0000 Code of practice for the design, installation and operation of sprinkler irrigation systems
Published By Publication Date Number of Pages
SNZ 1973-10-30 31
]]> Sets out rules for the design, installation and operation of sprinkler systems used for the irrigation of agricultural lands, orchards, market gardens, lawns and landscaped areas.

]]> IWA 20:2017 ?u=/product/publishers/iso/iwa-202017/ Wed, 06 Nov 2024 01:35:46 +0000 Understanding and applying drip irrigation for sustainable agriculture
Published By Publication Date Number of Pages
ISO 2017-03 36
]]> IWA 20:2017 reviews drip irrigation in comparison to major irrigation methods available and practiced today by farmers worldwide. IWA 20:2017 reviews the benefits of drip irrigation, such as increased yield, reduced water consumption, reduced energy consumption, lower environmental impact, reduced contamination of groundwater and surface water, reduced greenhouse gas emissions and reduced labour.

IWA 20:2017 also reviews some of the limitations of drip irrigation.

IWA 20:2017 does not provide a technical specification for the implementation of drip irrigation.

The qualities of drip irrigation referred to in IWA 20:2017 apply to systems manufactured in accordance with ISO 9261 or equivalent standard.

IWA 20:2017 is intended to be used by agricultural policymakers, infrastructure providers, water supply regulatory bodies and authorities, and food chain and farmer cooperatives interested in developing agricultural policies to preserve natural resources and funds. IWA 20:2017 is also intended to be used by farmers and smallholders interested in applying an economic agricultural method.

]]> ISO/TR 8059:1986 ?u=/product/publishers/iso/iso-tr-80591986/ Wed, 06 Nov 2024 01:19:01 +0000 Matériel d'irrigation — Systèmes d'irrigation automatiques — Régulation hydraulique
Published By Publication Date Number of Pages
ISO 1986-07 8
]]> Le présent Rapport technique traite des réseaux d'irrigation automatiques basés sur des dispositifs hydrauliques utilisant seulement l'énergie hydraulique du réseau; il donne les principales définitions et établit la classification relatives à ces réseaux. Le présent Rapport technique s'applique aux systèmes de régulation automatiques dans lesquels la régulation de l'arrosage est obtenue par le mesurage de la quantité d'eau. Les systèmes de régulation semi-automatiques sont utilisés avec des réseaux sous pression et capables de réguler la délivrance d'une quantité d'eau prédéterminée pour un cycle d'irrigation. Chaque nouveau cycle d'irrigation nécessite une nouvelle opération manuelle pour prérégler les quantités d'eau désirées.

]]> ISO/TR 15155:2005 ?u=/product/publishers/iso/iso-tr-151552005/ Wed, 06 Nov 2024 01:11:51 +0000 Test facilities for agricultural irrigation equipment
Published By Publication Date Number of Pages
ISO 2005-05 20
]]> ISO/TR 15155:2005 is intended to provide guidance on the design, selection, installation and use of the equipment required to establish basic test facilities for irrigation equipment evaluation. Its purpose is to provide information sufficient to complement the detailed procedures included in ISO 9261, ISO 15886, ISO 7714, ISO 9635, ISO 9644, ISO 9911, ISO 9952 and ISO 10522 for the testing of agricultural irrigation system components, specifically: emitters, sprinklers and valves.

]]> ISO/TR 15155-2:2012 ?u=/product/publishers/iso/iso-tr-15155-22012/ Wed, 06 Nov 2024 01:11:50 +0000 Agricultural irrigation equipment — Test facilities for agricultural irrigation equipment — Part 2: Test facility operating manual
Published By Publication Date Number of Pages
ISO 2012-10 40
]]> ISO/TR 15155-2:2012 is intended to provide guidance on the operation of basic test facilities for irrigation equipment evaluation. Its purpose is to provide information sufficient to implement the detailed procedures included in ISO 7714, ISO 8026, ISO 9261, ISO 9635-1 to 5, ISO 9644, ISO 9911 and ISO 10522 and ISO 15886-3 for the testing of agricultural irrigation system components, specifically emitters, sprinklers and valves. The intent is that the structure of tISO/TR 15155-2 can be modified to be used as the operating manual of a test facility established to test the components referred to in these International Standards.

]]> ISO/TR 15155-1:2018 ?u=/product/publishers/iso/iso-tr-15155-12018/ Wed, 06 Nov 2024 01:11:50 +0000 Agricultural irrigation equipment — Test facilities for agricultural irrigation equipment — Part 1: General
Published By Publication Date Number of Pages
ISO 2018-08 28
]]> This document gives guidelines for the design, selection, installation and use of the equipment required to establish basic test facilities for irrigation equipment evaluation. It provides the information sufficient to complement the detailed procedures included in ISO 7714, ISO 8026, ISO 9261, ISO 9635 (all parts), ISO 9644, ISO 9911, ISO 10522, ISO 15886 and ISO 16399 for the testing of agricultural irrigation system components, specifically emitters, sprinklers, valves, sprayers and water meters.

]]> ISO 9952:1993 ?u=/product/publishers/iso/iso-99521993/ Wed, 06 Nov 2024 00:31:57 +0000 Agricultural irrigation equipment— Check valves
Published By Publication Date Number of Pages
ISO 1993-03 11
]]> Specifies the construction and performance requirements (classification, mechanism, installation, marking, valve body length, connections), and test methods (resistance to internal hydrostatic pressure, tightness, valve opening after tightness test, pressure loss, endurance, tightness after mechanical endurance test) for check valves of nominal sizes 15 mm (0,5 in) up to and including 300 mm (12 in) intended for operation with water at temperatures not exceeding 50 °C, which may contain fertilizers and chemicals of types and concentrations used in agriculture.

]]> ISO 9912-4:2018 ?u=/product/publishers/iso/iso-9912-42018/ Wed, 06 Nov 2024 00:31:22 +0000 Agricultural irrigation equipment — Filters for microirrigation — Part 4: Granulated media filters
Published By Publication Date Number of Pages
ISO 2018-08 22
]]> This document specifies construction requirements and test methods for pressurized granulated media filters, hereinafter referred to as media filters, intended for operation in agricultural irrigation systems.

It is applicable to both manual cleaning media filters and automatic self-cleaning media filters, used as single unit or in batteries (two or more units working in parallel).

This document covers the operation and performance of a media filter, together with all related valves, back flushing mechanism, underdrains, manifolds and other related accessories necessary for the operation of the filter.

This document is applicable to three configurations of a filter.

a) An empty filter vessel (tank) housing.

b) A filter vessel filled with media filter material(s), complete with valves, connections, air release and/or other accessories. This configuration, when connected to and controlled by a flushing control device, is a complete operating single filter unit, usually positioned as a part of a filtration station.

c) A filtration station, called "filter battery".

Annex A provides information on types of irrigation media filters.

Annex B provides information on granulated media.

]]> ISO 9912-3:2013 ?u=/product/publishers/iso/iso-9912-32013/ Wed, 06 Nov 2024 00:31:21 +0000 Agricultural irrigation equipment — Filters for microirrigation — Part 3: Automatic flushing strainer-type filters and disc filters
Published By Publication Date Number of Pages
ISO 2013-10 14
]]> ISO 9912-3:2013 specifies general construction requirements and test methods for automatic flushing strainer-type filters and disc filters intended for operation in agricultural irrigation systems.

It does not cover the aspects of filtration ability, efficiency and capacity (like quality of filtered water or time of operation before filter becomes entirely clogged).

]]> ISO 9912-2:2013 ?u=/product/publishers/iso/iso-9912-22013/ Wed, 06 Nov 2024 00:31:21 +0000 Agricultural irrigation equipment — Filters for microirrigation — Part 2: Strainer-type filters and disc filters
Published By Publication Date Number of Pages
ISO 2013-11 16
]]> ISO 9912-2:2013 specifies general construction requirements and test methods for strainer filters and disc filters intended for operation in agricultural irrigation systems.

It does not cover the aspects of filtration ability, efficiency and capacity (like quality of filtered water or time of operation before a filter becomes entirely clogged), nor does it deal with structural requirements or tests of automatic flushing mechanism filters that are covered by ISO 9912-3.

]]>