65.060.99 – Other agricultural machines and equipment – PDF Standards Store ?u= Wed, 06 Nov 2024 02:57:32 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png 65.060.99 – Other agricultural machines and equipment – PDF Standards Store ?u= 32 32 JIS Z 1513:1992 ?u=/product/publishers/jis/jis-z-15131992/ Wed, 06 Nov 2024 02:57:32 +0000 Gunny Bags
Published By Publication Date Number of Pages
JIS 1992-03-01 6
]]>
Gunny Bags
Published By Publication Date Number of Pages
JIS 1992-03-01 6
]]>
ISO 15003:2019 ?u=/product/publishers/iso/iso-150032019/ Tue, 05 Nov 2024 21:33:49 +0000 Agricultural engineering — Electrical and electronic equipment — Testing resistance to environmental conditions
Published By Publication Date Number of Pages
ISO 2019-11 30
]]>
This document provides design requirements and guidance for the manufacturers of electrical and electronic equipment for use in all kinds of mobile (including hand-held) agricultural machinery, forestry machinery, landscaping and gardening machinery [referred to hereafter as machine(s)]. The term machinery covers tractors and implements. This document gives tests for specific environmental conditions and defines severity levels for tests which relate to the environmental extremes that can be experienced in practical operation of the equipment.

This document is intended to be used in determining the suitability of the equipment of these machines, for use in a specified range of environmental conditions.

NOTE The severity levels given are general guidelines and not guaranteed worst-case exposure levels.

]]>
ISO 15003:2006 ?u=/product/publishers/iso/iso-150032006/ Tue, 05 Nov 2024 21:33:49 +0000 Agricultural engineering — Electrical and electronic equipment — Testing resistance to environmental conditions
Published By Publication Date Number of Pages
ISO 2006-02 30
]]>
ISO 15003:2006 provides design requirements and guidance for the manufacturers of electrical and electronic equipment for use in all kinds of mobile (including hand-held) agricultural machinery, forestry machinery, landscaping and gardening machinery. It gives tests for specific environmental conditions and defines severity levels for tests which relate to the environmental extremes that can be experienced in practical operation of the equipment.

]]>
IEC 60335-2-87:2016 ?u=/product/publishers/iec/iec-60335-2-872016/ Tue, 05 Nov 2024 18:48:15 +0000 Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal stunning equipment
Published By Publication Date Number of Pages
IEC 2016-05-25 46
]]>
IEC 60335-2-87:2016 deals with the safety of electric animal-stunning equipment the rated voltage of which is not more than 250 V for single-phase appliances and 480 V for other appliances. Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard. Dual supply appliances, either mains-supplied or battery-operated, are regarded as battery-operated appliances when operated in the battery mode. This standard is applicable to electric animal-stunning equipment for industrial or commercial use, for use on farms or for use in areas where they may be a source of danger to the public. So far as is practical, this standard deals with the common hazards presented by these types of appliances. Examples of electric animal-stunning equipment within the scope of this standard are those used to stun:
– bovines such as cattle, calves, cows, heifers and bulls;
– ovines such as sheep and lambs;
– caprines such as goats;
– cervids such as deer;
– solipeds such as horses, donkeys and mules;
– birds such as chickens, turkeys and guinea fowl;
– porcines such as pigs;
– fur animals such as foxes, chinchilla, rabbits and possums;
– mustelids such as mink and polecats and other ruminants such as camels. The following types of electric animal-stunning equipment are covered by this standard: manual, semi-automatic and automatic. This third edition cancels and replaces the second edition published in 2002 including its Amendment 1 (2007) and its Amendment 2 (2012). This edition constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-87 are as follows (minor changes are not listed):
– Warning sign ISO 7010-W012 has been introduced (7.1, 7.6, 7.12, 7.14).
– Reference to IEC 60068-2-32 has been replaced by reference to IEC 60068-2-31 (21.1).
– Additional requirements for battery operated stunning have been transferred to Annex S (5.8.1, 7.1, 7.8, 7.12, 11.5, 16, 22.102, 25.5, 25.7, 25.20, 25.23, 25.101, 26.5). It was established on the basis of the fifth edition (2010) of that standard. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this standard be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication. Key words: Electrical, Stunning Equipment. Animal, Electrode

This publication is to be read in conjunction with IEC 60335-1:2010.

]]>
DIN EN 703:2022 Edition ?u=/product/publishers/din/din-en-703/ Tue, 05 Nov 2024 16:40:44 +0000 Agricultural machinery - Safety - Silage loading, mixing and/or chopping and distributing machines
Published By Publication Date Number of Pages
DIN 2022-03 59
]]>
This document, used together with EN ISO 4254-1:2015, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed or self-propelled machines that have a combination of two or more of the following functions: loading, mixing, chopping and distributing silage and/or other feedstuffs, to be used by one operator only. It includes those fitted with a built-in loading crane. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

]]>
DIN EN 16952/A1:2020 Edition ?u=/product/publishers/din/din-en-16952-a1/ Tue, 05 Nov 2024 16:07:44 +0000 Agricultural machinery - Rough-terrain Work Platforms for Orchard's operations (WPO) - Safety
Published By Publication Date Number of Pages
DIN 2020-05 19
]]>
Amendment to include additional safety related specification in DIN EN 16952:2019

]]>
DIN EN 16952:2022 Edition ?u=/product/publishers/din/din-en-16952/ Tue, 05 Nov 2024 16:07:43 +0000 Agricultural machinery - Rough-terrain Work Platforms for Orchard's operations (WPO) - Safety
Published By Publication Date Number of Pages
DIN 2022-07 86
]]>
This European Standard, when used together with EN ISO 4254-1 and EN 15811, specifies safety requirements and measures for self-propelled rough-terrain work platforms for orchard´s operations (WPO) operating at a maximum of 3 m high as defined in 3.1, where the vertical projection of the centre of the area of the platform in all platform configurations at the maximum chassis inclination specified by the manufacturer is always inside the tipping lines, used in agriculture, designed to work on unimproved natural terrain and/or disturbed terrain and intended to move at least two persons to working positions in an orchard where they are carrying out fruit picking, thinning out, pruning, or other operations related to orchard from the work platform. Amendment A1 corrects Table 3 and adapted Annex ZA to the new requirements.

]]>
CSA C22.2 NO. 60335-2-87:20:2020 Edition ?u=/product/publishers/csa/csa-c22-2-no-60335-2-8720/ Tue, 05 Nov 2024 14:50:09 +0000 Appareils électrodomestiques et analogues — Sécurité — Partie 2-87 : Exigences particulières pour les appareils électriques d’insensibilisation des animaux
Published By Publication Date Number of Pages
CSA 2020-05-01 119
]]>
Préface CSA

Ce document constitue la première édition de CSA C22.2 nº 60335-2-87, Appareils électrodomestiques et analogues — Sécurité — Partie 2-87 : Exigences particulières pour les appareils électriques d’insensibilisation des animaux. Il s’agit de l’adoption, avec exigences propres au Canada, de la norme IEC (Commission Électrotechnique Internationale) 60335-2-87 (édition 3:2016 consolidée par l’amendement 1:2018), qui porte le même titre. Il fait partie d’une série de normes publiées par Groupe CSA qui constituent le Code canadien de l’électricité, Deuxième partie.

Cette norme est conçue pour être utilisée de concert avec CAN/CSA-C22.2 nº 60335-1:16, Appareils électrodomestiques et analogues — Sécurité — Partie 1: Prescriptions générales (norme IEC 60335-1:2010+A1:2013 adoptée, avec exigences propres au Canada).

Cette norme a été élaborée conformément aux exigences du Conseil canadien des normes concernant les Normes nationales du Canada. Cette norme a été publiée en tant que Norme nationale du Canada par Groupe CSA.

Domaine d’application

L’article de la Partie 1 est remplacé par l’article ci-après.

La présente partie de l’IEC 60335 traite de la sécurité des appareils électriques d’insensibilisation des animaux dont la tension assignée n’est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils.

NOTE 101 Les appareils alimentés par batteries et autres appareils à alimentation électrique en courant continu relèvent du champ d’application de la présente norme. Les appareils à double alimentation, fonctionnant sur le réseau ou par batteries, sont considérés, lorsqu’ils fonctionnent en mode batterie, comme des appareils alimentés par batteries.

La présente norme est applicable aux appareils électriques d’insensibilisation des animaux pour usage industriel ou commercial, destinés à être utilisés dans des fermes ou dans des endroits où ils peuvent constituer une source de danger pour le public.

Dans la mesure du possible, la présente norme traite des dangers ordinaires présentés par ces types d’appareils.

NOTE 102 Exemples d’appareils électriques d’insensibilisation des animaux relevant du domaine d’application de la présente norme utilisés pour insensibiliser:

– des bovidés, tels que bovins, veaux, vaches, génisses et taureaux;

– des ovins, tels que moutons et agneaux;

– des caprins, tels que les chèvres;

– des cervidés, tels que les cerfs;

– des solipèdes, tels que les chevaux, les ânes et les mules;

– des volailles, telles que les poulets, les dindes et les pintades;

– des porcins, tels que les porcs;

– des animaux à fourrure, tels que les renards, les chinchillas, les lapins et les opossums;

– des mustélidés, tels que les visons et les putois;

– autres ruminants, tels que les chameaux.

NOTE 103 Les types d’appareils électriques d’insensibilisation des animaux suivants sont couverts par la présente norme:

– manuels, semi-automatiques et automatiques.

NOTE 104 L’attention est attirée sur le fait que:

– pour les appareils électriques d’insensibilisation des animaux destinés à être utilisés à bord de navires, des exigences supplémentaires peuvent être nécessaires;

– dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs, par les organismes nationaux responsables de l’alimentation en eau et par des organismes analogues;

– dans de nombreux pays, des exigences supplémentaires sont spécifiées concernant l’abattage sans douleur des animaux.

NOTE 105 La présente norme ne s’applique pas:

– aux appareils destinés à être utilisés dans des locaux présentant des conditions particulières, par exemple la présence d’une atmosphère corrosive ou explosive (poussières, vapeur ou gaz);

– aux électrificateurs de clôtures (voir l’IEC 60335-2-76);

– aux appareils électriques de pêche (voir l’IEC 60335-2-86);

– aux appareils attendrisseurs de viande, aux immobilisateurs de carcasses, aux raidisseurs de carcasses, aux équipements de dégagement spinal et aux équipements analogues.

]]>
AS/NZS 60335.2.87:2019 (IEC TEXT) ?u=/product/publishers/as/as-nzs-60335-2-872019-iec-text/ Tue, 05 Nov 2024 13:47:24 +0000 Household and similar electrical appliances - Safety - Part 2.87: Particular requirements for electric animal stunning equipment
Published By Publication Date Number of Pages
AS 2019-06-28 32
]]>
This standard deals with the safety of electric animal-stunning equipment the rated voltage of which is not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard. Dual supply appliances, either mains-supplied or battery-operated, are regarded as battery-operated appliances when operated in the battery mode. This standard is applicable to electric animal-stunning equipment for industrial or commercial use, for use on farms or for use in areas where they may be a source of danger to the public. AS/NZS 60335.2.87:2019 will supersede AS/NZS 60335.2.87:2002 on 28 June 2022; however Regulatory authorities that reference this Standard in regulation may apply these requirements at a different time. Identical to, and includes the text of, IEC 60335-2-87 Ed.3.1.

]]>
BSI 23/30475699 DC 2023 ?u=/product/publishers/bsi/bsi-23-30475699-dc-2023/ Sun, 20 Oct 2024 07:50:13 +0000 BS EN ISO 4254-19. Agricultural machinery. Safety - Part 19. Feed mixing machines
Published By Publication Date Number of Pages
BSI 2023 53
]]>
BS EN ISO 4254-19. Agricultural machinery. Safety - Part 19. Feed mixing machines
Published By Publication Date Number of Pages
BSI 2023 53
]]>