87.080 – Inks. Printing inks – PDF Standards Store ?u= Wed, 06 Nov 2024 05:18:33 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png 87.080 – Inks. Printing inks – PDF Standards Store ?u= 32 32 TAPPI TIP 0304-61:2019 ?u=/product/publishers/tappi/tappi-tip-0304-612019/ Wed, 06 Nov 2024 05:18:33 +0000 The Role of Copper in a Printing Ink
Published By Publication Date Number of Pages
TAPPI 2019-12-17 2
]]> TAPPI TIP 0304-61 attempts to provide a basic understanding of the role that copper plays in a printing ink, its use and its control. Copper is a concern to many box makers since its presence in plant effluents is often monitored by local sewage authorities. Therefore, caution should be exercised as the copper discharge limits in certain municipalities are extremely low. In some cases, these limits are less than 0.0001% (1.0 ppm).

]]> TAPPI TIP 0304-59:2001 ?u=/product/publishers/tappi/tappi-tip-0304-592001/ Wed, 06 Nov 2024 05:18:32 +0000 Important Quality Parameters of a Printing Ink
Published By Publication Date Number of Pages
TAPPI 2001-01-01 2
]]> The objective of this Technical Information Paper is to list several important quality parameters of a printing ink. The list represents many physical, chemical and performance properties for flexographic printing inks.

The intent is to establish a comprehensive list of quality characteristics which can be discussed with individual ink suppliers to help establish performance requirements for a box plant.

The list provides a starting point for communication between ink users and suppliers so that critical ink properties can be identified for a given application. Once identified, quality specifications can be mutually developed.

]]> JIS T 9253:2004 ?u=/product/publishers/jis/jis-t-92532004/ Wed, 06 Nov 2024 02:55:47 +0000 Performance and Test Method of Ultraviolet Ray Hardening Resinous Braille
Published By Publication Date Number of Pages
JIS 2004-06-20 9
]]> Performance and Test Method of Ultraviolet Ray Hardening Resinous Braille
Published By Publication Date Number of Pages
JIS 2004-06-20 9
]]> ISO/TS 19857:2021 ?u=/product/publishers/iso/iso-ts-198572021/ Wed, 06 Nov 2024 01:30:45 +0000 Paper, board and printing inks – Printability – Laboratory test method for offset ink setting
Published By Publication Date Number of Pages
ISO 2021-06 30
]]> This document describes a laboratory test method, using an IGT1-type or a prüfbau2-type printability tester, for the preparation of specimens to evaluate the absorption rate of an ink on a substrate in offset lithography by setting-off the printed surface to an unprinted surface.

This method describes testing with an amount of ink simulating either single colour or multi-colour printing. The print and the set-off print (counter print) are made with interval times, between print and set-off, common for the target process.

This method evaluates a particular ink and substrate combination.

 

1These materials are available from IGT Testing Systems, www.igt.nl. This information is given for the convenience of the users of this document and does not constitute an endorsement by ISO of the products. Equivalent products may be used if they can be shown to lead to the same results.

2These materials are available from prüfbau, Dr.-Ing. H. Dürner GmbH, www.pruefbau.de. This information is given for the convenience of the users of this document and does not constitute an endorsement by ISO of the products. Equivalent products may be used if they can be shown to lead to the same results.

]]> ISO 2846-5:2005 ?u=/product/publishers/iso/iso-2846-52005/ Tue, 05 Nov 2024 22:56:20 +0000 Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 5: Flexographic printing
Published By Publication Date Number of Pages
ISO 2005-03 20
]]> ISO 2846-5:2005 specifies the colour and transparency to be produced by each ink in a process colour ink set (including extender) intended for four-colour flexographic printing, when printed under specified flexographic printing conditions. It also describes the conformance test method.

ISO 2846-5:2005 does not specify pigments (or spectral reflectance), in order not to preclude developments that may enable different pigment combinations to be used advantageously, while still achieving the colorimetric requirements specified in this part of ISO 2846.

]]> ISO 2846-3:2002 ?u=/product/publishers/iso/iso-2846-32002/ Tue, 05 Nov 2024 22:56:19 +0000 Graphic technology — Colour and transparency of printing ink sets for four-colour-printing — Part 3: Publication gravure printing
Published By Publication Date Number of Pages
ISO 2002-10 20
]]> ISO 2846-3:2002 specifies the colour and transparency to be produced by a process colour ink set including extender intended for four-colour publication gravure printing when printed under specified gravure printing conditions. It also specifies the test method to ensure conformance.

ISO 2846-3:2002 does not specify pigments (or spectral reflectance) in order not to preclude developments which may enable different pigment combinations to be used advantageously while still achieving the colorimetric requirements specified in ISO 2846-3:2002.

NOTE ISO 2846-3:2002 may also apply to certain non-publication gravure applications.

]]> ISO 2846-4:2000 ?u=/product/publishers/iso/iso-2846-42000/ Tue, 05 Nov 2024 22:56:19 +0000 Graphic technology — Colour and transparency of printing ink sets for four-colour-printing — Part 4: Screen printing
Published By Publication Date Number of Pages
ISO 2000-12 20
]]> Graphic technology — Colour and transparency of printing ink sets for four-colour-printing — Part 4: Screen printing
Published By Publication Date Number of Pages
ISO 2000-12 20
]]> ISO 2846-2:2007 ?u=/product/publishers/iso/iso-2846-22007/ Tue, 05 Nov 2024 22:56:19 +0000 Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 2: Coldset offset lithographic printing
Published By Publication Date Number of Pages
ISO 2007-12 18
]]> ISO 2846-2:2007 specifies the colour and transparency to be produced by inks intended for four-colour coldset web offset printing when printed under specified conditions on a printability tester. It also describes the test method to ensure conformance.

ISO 2846-2:2007 is not applicable to fluorescent inks and does not specify pigments (or spectral reflectance) so as not to preclude the use of suitable future pigment combinations and still claim compliance with its colorimetric requirements.

]]> ISO 2846-1:2017 ?u=/product/publishers/iso/iso-2846-12017/ Tue, 05 Nov 2024 22:56:19 +0000 Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing
Published By Publication Date Number of Pages
ISO 2017-08 24
]]> ISO 2846-1:2017 specifies the colour and transparency characteristics that are to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined. Characteristics are specified for inks used for sheet-fed, heat-set web and radiation-curing processes.

ISO 2846-1:2017 does not apply to fluorescent inks and it does not specify pigments (or spectral characteristics ? except informatively) in order not to preclude developments which may enable different pigment combinations to be used advantageously while still achieving the colorimetric requirements specified in this document.

]]> ISO 2846-1:2006 ?u=/product/publishers/iso/iso-2846-12006/ Tue, 05 Nov 2024 22:56:18 +0000 Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing
Published By Publication Date Number of Pages
ISO 2006-11 22
]]> ISO 2846-1:2006 specifies the colour and transparency characteristics that have to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined. Characteristics are specified for inks used for sheet-fed, heat-set web and radiation-curing processes.

]]>