93.140 – Construction of waterways, ports and dykes – PDF Standards Store

JIS A 5513:2002

Wed, 06 Nov 2024 01:39:32 +0000

Gabions

Published By	Publication Date	Number of Pages
JIS	2002-06-20	17

JIS A 5513:2002/Amendment 1:2011

Wed, 06 Nov 2024 01:39:32 +0000

Gabions (Amendment 1)

Published By	Publication Date	Number of Pages
JIS	2011-02-21	4

DIN EN ISO 13174:2013 Edition

Tue, 05 Nov 2024 16:57:03 +0000

Kathodischer Korrosionsschutz für Hafenbauten

Published By	Publication Date	Number of Pages
DIN	2013-05	45

DIN EN 16840:2017 Edition

Tue, 05 Nov 2024 16:06:30 +0000

This European Standard specifies requirements relating to electrical installations for the supply of berthing inland navigation vessels with electrical energy three-phase AC – 400 V, with a frequency of 50 Hz and with a rated current of at least 250 A. Annex A specifies general and safety requirements relating to the shore-based section of the electrical shore connection. Annex B specifies general and safety requirements relating to the shore connection cables and to the on-board section of the electrical shore connection. Annex C gives guidance for the dimensioning of shore connection cables. The requirements of HD 60364 and HD 384 series of standards generally apply to shore-based low-voltage equipment.

DIN EN 15869-2:2019 Edition

Tue, 05 Nov 2024 15:56:19 +0000

Fahrzeuge der Binnenschifffahrt - Elektrischer Landanschluss, Drehstrom 400 V, 50 Hz, bis 125 A - Teil 2: Landseitiger Teil, zusätzliche Anforderungen

Published By	Publication Date	Number of Pages
DIN	2019-08	14

DIN EN 14504:2019 Edition

Tue, 05 Nov 2024 15:45:46 +0000

Diese Europäische Norm legt Sicherheitsanforderungen an schwimmende Anlegestellen und schwimmende Brücken für den Personenverkehr sowie deren Ausrüstung fest. Anforderungen an Einrichtungen zur Versorgung und Abfallentsorgung der Schiffe, die diese schwimmenden Anlagen benutzen, sind in dieser Norm nicht geregelt. Sie gilt nicht für: – schwimmende Anlegestellen für den Kraftfahrzeugverkehr; – schwimmende Anlegestellen der Sportschifffahrt und für Fahrzeuge der Binnenschifffahrt, die keine Schiffe sind, z. B. schwimmende Geräte; – weitergehende Anforderungen an schwimmende Anlegestellen, die dem Gefahrgutumschlag dienen; – eventuell notwendige Landstege zwischen Schiff und schwimmender Anlegestelle; – schwimmende Sonderkonstruktionen, die nicht dem Personenverkehr oder dem Anlegen von Schiffen dienen.*Inhaltsverzeichnis

DIN 19704-3:2014 Edition

Tue, 05 Nov 2024 15:12:08 +0000

Stahlwasserbauten - Teil 3: Elektrische Ausrüstung

Published By	Publication Date	Number of Pages
DIN	2014-11	9

DIN 19704-1:2014 Edition

Tue, 05 Nov 2024 15:12:07 +0000

This standard is to be used for the calculation and construction of hydraulic steel structures consisting of steel constructions, mechanical engineering components and the electric equipment. These structures cover movable sealing devices ("locks") including sealings and mountings, the drives and the connecting components between the lock body and the driving devices. This standard is applicable to hydraulic steel structures which are to be built from scratch. If this standard is intended to be applied for purposes of reconstruction, repair or addition of components to existing older steel structures, it shall be distinguished by declaration to which components this standard applies. This standard also applies to inspection covers and components such as intake rakes, bollards, fenders and channel bridges. It may be applied analogously to penstocks including valves and controls. This standard is not applicable to dolphins, training works, shore enclosures, landing piers and offshore structures (e. g. offshore platforms, jack-up platforms). For small and less loaded structures, were the product of multiplying water pressure (in kN/m2) and dam area (in m2) under water weight is less than 50 (in kN), the user may deviate from the requirements of this standard provided there is no objection by the building owner. Requirements for hydraulic steel engineering according to this standard include steel constructions which are under strain of stagnant or flowing waters. They cover movable sealing devices and parts securely connected with the massive type of construction, such as track supports and bearing area. Steel structures build in conjunction with hydraulic steel structures, but which are not exposed to water pressure are to be designed and calculated according to the applicable construction regulations. Requirements for mechanical engineering according to this standard are applicable to machine structures responsible for the movement and the bearings of lock devices, e. g. collar bearing, thrust bearing. They cover also the mechanical and oil-hydraulic drives, manual and auxiliary drives, machine covers and frames, pressure covers of sliding lock panel shafts, track and guide roller including their tracks, block shear connectors, spherical bearings and latching devices for the lock as well as – to connect the lock device body to the drive mechanism – chains, cables, lantern pinions, chains for lantern pinions, gear rods and connecting rods. Hinge bolts to connect machine components to steel structures as well as pivot spindles including the corresponding bore holes are machine parts according to this standard.

DIN 19704-2:2014 Edition

Tue, 05 Nov 2024 15:12:07 +0000

Stahlwasserbauten - Teil 2: Bauliche Durchbildung und Herstellung

Published By	Publication Date	Number of Pages
DIN	2014-11	38

UNE-EN ISO 13174:2012:2013 Edition

Tue, 05 Nov 2024 12:02:18 +0000

Cathodic protection of harbour installations

Published By	Publication Date	Number of Pages
AENOR	2013-04-01	40