97.200 – Equipment for entertainment – PDF Standards Store ?u= Wed, 06 Nov 2024 05:14:37 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.1 ?u=/wp-content/uploads/2024/11/cropped-icon-150x150.png 97.200 – Equipment for entertainment – PDF Standards Store ?u= 32 32 SNZ HB 5828.1:2006 ?u=/product/publishers/snz/snz-hb-5828-12006/ Wed, 06 Nov 2024 05:14:37 +0000 General Playground Equipment and Surfacing Handbook
Published By Publication Date Number of Pages
SNZ 2006-03-02 76
]]> This document is a Handbook to NZS 5828:2004. It is intended for owners and operators of playground facilities as a guide for achieving compliance with the Standard. It does not replace the Standard nor does it add any content to the Standard, but aims to present key safety information in everyday terms. It presents examples, recommendations and commentaries that provide guidance and includes checklists for different applications based on a risk management framework that will assist in reaching compliance with the Standard.

]]> NZS 5828:2015 ?u=/product/publishers/snz/nzs-58282015/ Wed, 06 Nov 2024 05:13:03 +0000 Playground equipment and surfacing
Published By Publication Date Number of Pages
SNZ 2015-12-10 290
]]> Specifies general requirements for playground equipment and surfacing for New Zealand. Use of this standard promotes and encourages playgrounds that are well designed, well constructed, well maintained, innovative, and challenging. Reproduced from and identical to EN 1176 Parts 1, 2, 3, 4, 5, 6, 7, 10, and 11:2008, EN 1177:2008, and BS 7188:1998 including Amendment 2:2009.

]]> NZS 5822:1992 ?u=/product/publishers/snz/nzs-58221992/ Wed, 06 Nov 2024 05:13:02 +0000 Prevention of ingestion and inhalation hazards in toys intended for use by children under three years of age
Published By Publication Date Number of Pages
SNZ 1992-04-23 52
]]> Sets out safety requirements and test methods for the prevention of ingestion and inhalation hazards in toys intended for use by children under three years of age. These are extracts from NZS 5820:1982 which met the requirements of the Product Safety Standards (Children`s Toys) Regulations 1992, and which is now revoked.

]]> NZS 5820:1982 ?u=/product/publishers/snz/nzs-58201982/ Wed, 06 Nov 2024 05:12:58 +0000 Specification for the safety of toys
Published By Publication Date Number of Pages
SNZ 1982-08-30 106
]]> Sets out general safety requirements, constructional requirements, toxicological requirements, flammability requirements and test methods for the safety of toys for children aged up to 14 years.

]]> JIS S 8508:1992 ?u=/product/publishers/jis/jis-s-85081992/ Wed, 06 Nov 2024 02:51:58 +0000 Piano Actions
Published By Publication Date Number of Pages
JIS 1992-07-01 15
]]> Piano Actions
Published By Publication Date Number of Pages
JIS 1992-07-01 15
]]> JIS S 8507:1992 ?u=/product/publishers/jis/jis-s-85071992/ Wed, 06 Nov 2024 02:51:57 +0000 Piano
Published By Publication Date Number of Pages
JIS 1992-07-01 13
]]> Piano
Published By Publication Date Number of Pages
JIS 1992-07-01 13
]]> JIS C 8105-2-17:2011 ?u=/product/publishers/jis/jis-c-8105-2-172011/ Wed, 06 Nov 2024 02:05:23 +0000 Luminaires - Part 2·17: Particular requirements for safety - Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor)
Published By Publication Date Number of Pages
JIS 2011-03-22 21
]]> This Standard specifies requirements for stage, television, film and photographic studio luminaires (including spot and floodlighting projectors) (hereafter referred to as "luminaires") for use, outdoor and indoor, with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 1 000 V.

Hangers (clamps) that are not attached to the luminaires are not considered as a part of the luminaire, therefore excluded from the scope of this Standard.

NOTE 1 An arm is a part of the luminaire.

Supporting devices such as tripods, telescopic booms and suspensions are not considered as parts of the luminaire.

Where applicable, ballasts are built into or mounted separately from the luminaires.

NOTE 2 The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows.

IEC 60598-2-17 : 1984 Luminaires – Part 2: Particular requirements.

Section Seventeen – Luminaires for stage lighting, television and film studios (outdoor and indoor), Amendment 1 : 1987 and Amendment 2 : 1990 (MOD)

In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21-1.

]]> ISO/TS 17929:2014 ?u=/product/publishers/iso/iso-ts-179292014/ Wed, 06 Nov 2024 01:29:20 +0000 Biomechanical effects on amusement ride passengers
Published By Publication Date Number of Pages
ISO 2014-09 32
]]> ISO 17929:2014 has been drawn up with the objective of ensuring the safety of amusement ride passengers, based on the international experience of manufacture and operation of such structures throughout the world gained over decades prior to its publication.

It enables the identification of potential hazards and classification of biomechanical effects, including information on recommended acceleration limits, rate of their onset and their duration, to ensure acceptable degrees of biomechanical risks at the stage of amusement ride design, as well as to take such risks into account during development of operational procedures and information on use limitations for amusement ride guests.

It gives recommendations regarding use limitations for amusement rides in accordance with the health condition and the well-being of passengers. It also specifies body dimensions of passengers 1,20 m to 2,0 m in height for motion risk analysis on amusement rides. These body dimensions can be taken into account when designing passenger containments and restraints.

It does not cover devices used in the circus, theatre or sports, or other devices intended for use only by specially trained people. Nevertheless, it can be used in the design of any similar structural or passenger-carrying device even if it does not explicitly mention the device.

ISO 17929:2014 is not applicable to amusement rides put into operation before the date of its publication.

]]> ISO/TR 8124-9:2020 ?u=/product/publishers/iso/iso-tr-8124-92020/ Wed, 06 Nov 2024 01:19:04 +0000 Safety of toys — Part 9: Safety aspects related to mechanical and physical properties — Comparison of ISO 8124-1, EN 71-1 and ASTM F963
Published By Publication Date Number of Pages
ISO 2020-03 134
]]> This document consists of a comparison of the mechanical and physical requirements covered by the following toy safety standards:

a) ISO: ISO 8124-1:2018;

b) Europe (CEN): EN 71-1:2014+A1:2018;

c) USA: ASTM F963:2017.

]]> ISO/TR 8124-9:2018 ?u=/product/publishers/iso/iso-tr-8124-92018/ Wed, 06 Nov 2024 01:19:03 +0000 Safety of toys — Part 9: Safety aspects related to mechanical and physical properties — Comparison of ISO 8124-1, EN 71-1, and ASTM F963
Published By Publication Date Number of Pages
ISO 2018-06 110
]]> This document consists of a comparison of the mechanical and physical requirements covered by the following toy safety standards:

a) ISO: ISO 8124-1:2014;

b) Europe (CEN): EN 71-1:2014;

c) USA: ASTM F963:2011.

]]>