PA – PDF Standards Store

Pennsylvania StateClimateSummary 2022

Sun, 20 Oct 2024 10:05:23 +0000

Pennsylvania State Climate Summary

Published By	Publication Date	Number of Pages
PA	2022

PA 49 24 2022 2019

Sun, 20 Oct 2024 07:22:39 +0000

Pennsylvania Bulletin Volume 49 Number 24, dated June 15, 2019

Published By	Publication Date	Number of Pages
PA	2019	156

PA 52 7 2022

Sun, 20 Oct 2024 07:22:39 +0000

Pennsylvania Bulletin Volume 52 Number 7, dated February 12, 2022

Published By	Publication Date	Number of Pages
PA	2022

PA 479md 2022

Sun, 20 Oct 2024 07:22:38 +0000

PA Court Order No. 479 M.D. 2021 Enjoinment of the 2021 International Code Accessibility Regulations, Filed October 26, 2022

Published By	Publication Date	Number of Pages
PA	2022	29

PA Changesto UCC 2022 1stptg

Sun, 20 Oct 2024 05:45:48 +0000

Gain full access to the 2022 updates to the Pennsylvania Uniform Construction Code (UCC) and key insights into the implications of these changes. This full-color publication compiles all 2022 UCC changes to the base International Codes and presents them in an easy-to-follow format identifying code section, title, type of change, change summary and change analysis. New code text is shown in underline/strikethrough format for immediate recognition of the change. Additional analysis, illustrations, tables and photos help enhance reader understanding. This user-friendly resource includes UCC changes to the Building, Residential, Energy, Existing Building, Fire, Mechanical, Plumbing, and Swimming Pool and Spa Codes, making it an ideal tool for all building industry professionals.

PDF Catalog

PDF Pages	PDF Title
1	2022 CHANGES TO THE PENNSYLVANIA UNIFORM CONSTRUCTION CODE
2	2022 CHANGES TO THE PENNSYLVANIA UNIFORM CONSTRUCTION CODE INCLUDES THE 2021 PENNSYLVANIA ALTERNATIVE RESIDENTIAL ENERGY PROVISIONS TITLE PAGE
3	COPYRIGHT
4	CONTENTS
6	PREFACE
7	ABOUT THE PENNSYLVANIA UNIFORM CONSTRUCTION CODE (UCC)
8	ABOUT ICC INTERNATIONAL CODES (I-CODES) ABOUT THE PA UCC REVIEW AND ADVISORY COUNCIL ABOUT THE PENNSYLVANIA BUILDING OFFICIALS CONFERENCE
9	ABOUT AIA PENNSYLVANIA ABOUT THE PENNSYLVANIA BUILDERS ASSOCIATION
10	ABOUT THE PA DEPARTMENT OF LABOR & INDUSTRY ACKNOWLEDGEMENTS
11	ABOUT THE INTERNATIONAL CODE COUNCIL®
12	PART 1: ACCESSIBILITY
13	INTERNATIONAL BUILDING CODE, 2021 EDITION CHAPTER 11 ACCESSIBILITY SECTION 1101 GENERAL SECTION 1102 COMPLIANCE SECTION 1103 SCOPING REQUIREMENTS
14	SECTION 1104 ACCESSIBLE ROUTE
16	SECTION 1105 ACCESSIBLE ENTRANCES
17	TABLE 1105.1.1 PUBLIC ENTRANCE WITH POWER-OPERATED DOORa SECTION 1106 PARKING AND PASSENGER LOADING FACILITIES
18	TABLE 1106.2 ACCESSIBLE PARKING SPACES
19	SECTION 1107 MOTOR-VEHICLE-RELATED FACILITIES SECTION 1108 DWELLING UNITS AND SLEEPING UNITS
23	TABLE 1108.6.1.1 ACCESSIBLE DWELLING UNITS AND SLEEPING UNITS
26	SECTION 1109 SPECIAL OCCUPANCIES TABLE 1109.2.2.1 ACCESSIBLE WHEELCHAIR SPACES
27	TABLE 1109.2.7.1 RECEIVERS FOR ASSISTIVE LISTENING SYSTEMS
28	TABLE 1109.3 ACCESSIBLE SELF-SERVICE STORAGE FACILITIES
29	SECTION 1110 OTHER FEATURES AND FACILITIES
35	TABLE 1110.13.1 ACCESSIBLE CHECK-OUT AISLES SECTION 1111 RECREATIONAL FACILITIES
37	TABLE 1111.4.9.1 BOAT SLIPS
38	SECTION 1112 SIGNAGE
40	APPENDIX E SUPPLEMENTARY ACCESSIBILITY REQUIREMENTS SECTION E101 GENERAL SECTION E102 DEFINITIONS
41	SECTION E103 ACCESSIBLE ROUTE SECTION E104 SPECIAL OCCUPANCIES TABLE E104.2.1 DWELLING OR SLEEPING UNITS WITH ACCESSIBLE COMMUNICATION FEATURES
42	SECTION E105 OTHER FEATURES AND FACILITIES
43	SECTION E106 TELEPHONES TABLE E106.2 WHEELCHAIR-ACCESSIBLE TELEPHONES
44	SECTION E107 SIGNAGE
45	SECTION E108 BUS STOPS SECTION E109 TRANSPORTATION FACILITIES AND STATIONS
47	SECTION E110 AIRPORTS SECTION E111 REFERENCED STANDARDS TABLE E111.1 REFERENCED STANDARDS INTERNATIONAL PLUMBING CODE, 2021 EDITION SECTION 403 MINIMUM PLUMBING FACILITIES
48	SECTION 404 ACCESSIBLE PLUMBING FACILITIES SECTION 405 INSTALLATION OF FIXTURES INTERNATIONAL SWIMMING POOL AND SPA CODE, 2021 EDITION INTERNATIONAL EXISTING BUILDING CODE, 2021 EDITION SECTION 306 ACCESSIBILITY FOR EXISTING BUILDINGS
52	SECTION 1101 GENERAL SECTION 1508 ACCESSIBILITY APPENDIX B SUPPLEMENTARY ACCESSIBILITY REQUIREMENTS FOR EXISTING BUILDINGS AND FACILITIES SECTION B101 QUALIFIED HISTORIC BUILDINGS AND FACILITIES
53	SECTION B102 FIXED TRANSPORTATION FACILITIES AND STATIONS
54	SECTION B103 DWELLING UNITS AND SLEEPING UNITS SECTION B104 REFERENCED STANDARDS [BE] TABLE B104.1 REFERENCED STANDARDS
56	PART 2: CODES ADOPTED WITHOUT MODIFICATION
58	PART 3: INTERNATIONAL BUILDING CODE (IBC) CHAPTERS 1, 7, 8, 11, 30 AND APPENDIX E
60	IBC CHAPTER 1 SCOPE AND ADMINISTRATION
61	IBC 7042, 704.4.1 COLUMN PROTECTION & LIGHT-FRAME CONSTRUCTION IMAGE: CHANGE SIGNIFICANCE
62	IBC 803.3 HEAVY TIMBER EXEMPTION IMAGE: CHANGE SIGNIFICANCE
63	IBC CHAPTER 11 ACCESSIBILITY FIGURE: CHANGE SIGNIFICANCE
64	IBC CHAPTER 30 ELEVATORS AND CONVEYING SYSTEMS CHAPTER 30 ELEVATORS AND CONVEYING SYSTEMS 3002.1 HOISTWAY ENCLOSURE PROTECTION 3002.2 NUMBER OF ELEVATOR CARS IN A HOISTWAY 3002.4 ELEVATOR CAR TO ACCOMMODATE AMBULANCE STRETCHER 3002.7 COMMON ENCLOSURE WITH STAIRWAY 3004.2.1 ENCLOSURE 3004.3.1 ENCLOSURE SECTION 3005 MACHINE ROOMS
65	SECTION 3006 ELEVATOR LOBBIES AND HOISTWAY OPENING PROTECTION
66	SECTION 3007 FIRE SERVICE ACCESS ELEVATOR
67	FIGURE 3007.6.5 FIRE SERVICE ACCESS ELEVATOR SYMBOL
68	SECTION 3008 OCCUPANT EVACUATION ELEVATORS
72	IMAGE: CHANGE SIGNIFICANCE
74	PART 4: INTERNATIONAL EXISTING BUILDING CODE (IEBC) CHAPTERS 1 AND 11
75	IEBC 106.2.5.5 EXTERIOR BALCONIES AND ELEVATED WALKING SURFACES IMAGE: CHANE SIGNIFICANCE
76	IEBC 1106 STORM SHELTERS IMAGE: STORM SHELTERS
78	PART 5: INTERNATIONAL ENERGY CONSERVATION CODE (IECC) COMMERCIAL PROVISIONS CHAPTERS 1 AND 4
79	IECC C105.2.6 FINAL INSPECTION IMAGE: CHANGE SIGNIFICANCE
80	IECC C402.2.1 ROOF ASSEMBLY
81	IMAGE: CHANGE SIGNIFICANCE
82	IECC C402.5.3 ROOMS CONTAINING FUEL-BURNING APPLIANCES
83	IMAGE: CHANGE SIGNIFICANCE
84	PART 6: INTERNATIONAL ENERGY CONSERVATION CODE ( IECC) RESIDENTIAL PROVISIONS CHAPTERS 1, 2, 4 AND 5 [RE]
85	IECC R102 ABOVE CODE PROGRAMS IMAGE: CHANGE OF SIGNIFICANCE
86	IECC R202 GENERAL DEFINITIONS FIGURE: CHANGE OF SIGNIFICANCE
87	IECC TABLE R402.1.2 MAXIMUM ASSEMBLY U-FACTORS AND FENESTRATION REQUIREMENTS TABLE R402.1.2 INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENTA
88	IECC R403.3.5 BUILDING CAVITIES FIGURE: BUILDING FRAMING CAVITIES MAY BE USED FOR RETURN AIR ONLY
89	IECC R405.2 MANDATORY REQUIREMENTS IMAGE: CHANGE SIGNIFICANCE
90	IECC R405.4.2 COMPLIANCE REPORT
91	IECC R406.3 ENERGY RATING INDEX
92	IECC R406.6.1 COMPLIANCE SOFTWARE TOOLS
93	IECC R406.6.4 SPECIFIC APPROVAL
94	IECC R406.6.5 INPUT VALUES
95	IECC R406.7 CALCULATION SOFTWARE TOOLS
96	IECC R502.1.1.2 HEATING AND COOLING SYSTEMS IMAGE: CHANGE SIGNIFICANCE
97	IECC R503.1.2 HEATING AND COOLING SYSTEMS IMAGE: HEATING AND COOLING SYSTEMS
98	PART 7: INTERNATIONAL RESIDENTIAL CODE CHAPTERS 3, 4, 7, 8, 10, 11, 13, 14, 15, 25, 29 AND 39
101	IRC R302.5.1 OPENING PROTECTION IMAGE: CHANGE OF SIGNIFICANCE
102	IRC R311.7.4 WALKLINE FIGURE R311.7.4 WINDER TREAD AND LANDING DETAIL
103	IRC R314 .4 INTERCONNECTION IMAGE: CHANGE OF SIGNIFICANCE
104	IRC R322.2.1 ELEVATION REQUIREMENTS
105	IRC R322.3.2 ELEVATION REQUIREMENTS
106	FIGURE: CHANGE SIGNIFICANCE
107	IRC R325.5 OPENNESS IMAGE: CHANGE SIGNIFICANCE
108	IRC R325.6 HABITABLE ATTIC IMAGE: CHANGE SIGNIFICANCE
109	IRC R408.3 UNVENTED CRAWL SPACE IMAGE: CHANGE SIGNIFICANCE
110	IRC R702.7.3 MINIMUM CLEAR AIRSPACES AND VENTED OPENING FOR VENTED CLADDING IMAGE: CHANGE SIGNIFICANCE
111	IRC R703.7 EXTERIOR PLASTER (STUCCO )
114	IMAGE: CHANGE SIGNIFICANCE
115	IRC R806.1 VENTILATION REQUIRED IMAGE: CHANGE SIGNIFICANCE
116	IRC R806.2 MINIMUM VENT AREA
117	IMAGE: CHANGE SIGNIFICANCE
118	IRC R806.3 VENT AND INSULATION CLEARANCE IMAGE: CHANGE OF SIGNIFICANCE
119	IRC R1005.8 INSULATION SHIELD IMAGE: CHANGE SIGNIFICANCE
120	IRC N1101.4 (R102.1.1) ABOVE CODE PROGRAMS
121	IRC TABLE N1102.1.2 (R402.1.2) TABLE N1102.1.2 (R402.1.2) INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENT
122	IRC N1103.3.5 (R403.3.5) BUILDING CAVITIES (MANDATORY) FIGURE: BUILDING FRAMING CAVITIES MAY BE USED FOR RETURN AIR ONLY
123	IRC N1105.2 (R405.2) MANDATORY REQUIREMENTS IMAGE: CHANGE OF SIGNIFICANCE
124	IRC N1105.4.2 (R405.4.2) COMPLIANCE REPORT FIGURE: CHANGE OF SIGNIFICANCE
125	IRC N1106.3 (R406.3) ENERGY RATING INDEX
126	IRC N1106.6.1 (R406.6.1) COMPLIANCE SOFTWARE TOOLS
127	IRC N1106.6.4 (R406.6.4) SPECIFIC APPROVAL
128	IRC N1106.6.5 (R406.6.5) INPUT VALUES
129	IRC N1106.7 (R406.7) CALCULATION SOFTWARE TOOLS
130	IRC N1108.1.1.2 (R502.1.1.2) HEATING AND COOLING SYSTEMS IMAGE: CHANGE SIGNIFICANCE
131	IRC N1109.1.2 (R503.1.2) HEATING AND COOLING SYSTEMS IMAGE: CHANGE SIGNIFICANCE
132	IRC M1305.1.3.2 PIT LOCATIONS IMAGE: CHANGE SIGNIFICANCE
133	IRC M1411.6.1 REFRIGERANT LINE INSULATION PROTECTION IMAGE: CHANGE SIGNIFICANCE
134	IRC M1502.3.1 EXHAUST TERMINATION OUTLET AND PASSAGEWAY SIZE IMAGE: CHANGE SIGNIFICANCE
135	IRC P2503.5.1 ROUGH PLUMBING IMAGE: CHANGE SIGNIFICANCE
136	IRC P2903.5 WATER HAMMER IMAGE: CHANGE SIGNIFICANCE
137	IRC P2906.6.1 SADDLE TAP FITTINGS IMAGE: CHANGE SIGNIFICANCE
138	IRC E3901.11 FOYERS FIGURE: CHANGE SIGNIFICANCE
140	PART 8: APPENDICES
142	APPENDIX A 2021 PENNSYLVANIA ALTERNATIVE RESIDENTIAL ENERGY PROVISIONS
144	2021 PENNSYLVANIA ALTERNATIVE RESIDENTIAL ENERGY PROVISIONS
147	COPYRIGHT
148	ACKNOWLEDGMENTS
150	TABLE OF CONTENTS
152	PREFACE
154	SECTION PA100 GENERAL SCOPE PA102 INTENT PA103 COMPLIANCE PA104 ENTRANCE REQUIREMENTS TABLE PA104 ENERGY ENHANCEMENT OPTIONS
155	PA105 COMPLIANCE DOCUMENTS PA106 DEFINITIONS PA107 IDENTIFICATION PA108 BUILDING THERMAL ENVELOPE INSULATION PA109 FENESTRATION PRODUCT RATING PA110 INSULATION PRODUCT RATING PA111 INSTALLATION
156	PA112 MAINTENANCE INFORMATION PA113 ABOVE CODE PROGRAMS PA114 CERTIFICATE
158	SECTION PA200 CLIMATE ZONES PA201 GENERAL FIGURE PA201.1 PENNSYLVANIA CLIMATE ZONES
160	SECTION PA300 BUILDING THERMAL ENVELOPE PA301 INSULATION AND FENESTRATION CRITERIA TABLE PA301 INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENT PA302 SPECIFIC INSULATION REQUIREMENTS
161	FIGURE PA302.4 (1) ATTIC HATCH FIGURE PA302.4 (2) PULL-DOWN STAIRS
162	FIGURE PA302.9.1 EXTERIOR SLAB INSULATION
163	FIGURE PA302.9.2 INTERIOR SLAB INSULATION
164	PA303 FENESTRATION PA304 AIR LEAKAGE
166	TABLE PA304.11 AIR BARRIER AND INSULATION INSTALLATION
168	SECTION PA400 SYSTEMS PA401 CONTROLS PA402 HOT WATER BOILER OUTDOOR TEMPERATURE SETBACK PA403 DUCTS
169	TABLE PA402.4 DUCT LEAKAGE TARGETS
170	PA404 MECHANICAL SYSTEM PIPING INSULATION PA405 SERVICE HOT WATER SYSTEMS PA406 MECHANICAL VENTILATION TABLE PA406.1 WHOLE-HOUSE MECHANICAL VENTILATION SYSTEM FAN EFFICACY PA407 EQUIPMENT SIZING AND EFFICIENCY RATING PA408 SNOW MELT SYSTEM CONTROLS
171	PA409 POOLS AND PERMANENT SPA ENERGY CONSUMPTION
172	SECTION PA500 ELECTRICAL POWER AND LIGHTING SYSTEMS PA501 LIGHTING EQUIPMENT
176	COMPLIANCE WORKSHEET 2021 PENNSYLVANIA ALTERNATIVE RESIDENTIAL ENERGY PROVISIONS (PA-ALT)
177	2021 PENNSYLVANIA ALTERNATIVE RESIDENTIAL ENERGY PROVISIONS: REFERENCE TABLES TABLE PA104 ENERGY ENHANCEMENT OPTIONS TABLE PA301 INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENT
178	APPENDIX B PENNSYLVANIA CONSTRUCTION CODE ACT NO. 45
180	PENNSYLVANIA CONSTRUCTION CODE ACT ACT OF NOV. 10, 1999, P.L. 491, NO. 45 C1.35 TABLE OF CONTENTS
181	CHAPTER 1 PRELIMINARY PROVISIONS SECTION 101 SHORT TITLE SECTION 102 LEGISLATIVE FINDINGS AND PURPOSE
182	SECTION 103 DEFINITIONS
185	SECTION 104 APPLICATON
188	SECTION 105 DEPARTMENT OF LABOR AND INDUSTRY
189	SECTION 106 ACCESSIBILITY ADVISORY BOARD
190	SECTION 107 UNIFORM CONSTRUCTION CODE REVIEW AND ADVISORY COUNCIL
196	SECTION 108 REVIEW OF UPDATED SECTIONS AND ADOPTION OF UPDATED SECTIONS INTO UNIFORM CONSTRUCTION CODE
199	CHAPTER 3 UNIFORM CONSTRUCTION CODE
200	SECTION 301 ADOPTION BY REGULATIONS
202	SECTION 302 REFERENCED STANDARDS SECTION 303 EXISTING MUNICIPAL BUILDING CODES
203	SECTION 304 REVISED OR SUCCESSOR CODES
204	SECTION 305 EXISTING MUNICIPALITY OR MUNICIPAL AUTHORITY STANDRDS FOR LATERAL CONNECTIONS
205	CHAPTER 5 ADOPTION AND ENFORCEMENT BY MUNICIPALITIES SECTION 501 ADMINISTRATION AND ENFORCEMENT
209	SECTION 502 CONSIDERATION OF APPLICATIONS AND INSPECTIONS
211	SECTION 503 CHANGES IN UNIFORM CONSTRUCTION CODE
213	SECTION 504 APPEALS CHAPTER 7 TRAINING AND CERTIFICATION OF INSPECTORS SECTION 701 TRAINING OF INSPECTORS
215	SECTION 702 RECIPROCITY SECTION 703 EDUCATION AND TRAINING PROGRAMS
217	CHAPTER 9 EXEMPTIONS, APPLICABILITY AND PENALTIES
218	SECTION 901 EXEMPTIONS
221	SECTION 902 APPLICABILITY TO CERTAIN BUILDINGS
224	SECTION 903 PENALTIES CHAPTER 11 MISCELLANEOUS PROVISIONS SECTION 1101 SAVINGS
225	SECTION 1102 REPEALS SECTION 103 EFFECTIVE DATE
226	APPENDIX C PENNSYLVANIA CONSTRUCTION CODE CHAPTER 401. CODE TRAINING AND CERTIFICATION CHAPTER 403. ADMINISTRATION
228	CHAPTER 401. UNIFORM CONSTRUCTION CODE TRAINING AND CERTIFICATION OFCODE ADMINISTRATORS § 401.1 DEFINTIONS
235	§ 401.2 DEPARTMENT FEES
237	§ 401.2a MUNICIPAL AND THIRD-PARTY AGENCY FEES
238	§ 401.3 CERTIFICATION REQUIRED § 401.4 APPLICATION AND IDENTIFICATION
239	§ 401.5 WAIVERS § 401.6 CERTIFICATION CATEGORIES AND TESTING
241	§ 401.7 CERTIFICATION CATEGORY SPECIFICATIONS
245	§ 401.8 CERTIFICATION RENEWAL
246	§ 401.9 CONTINUING EDUCATION
247	§ 401.10 DEPARTMENT-APPROVED PROVIDERS § 401.11 CERTIFICATION OF THIRD-PARTY AGENCY
248	§ 401.12 LIABILITY INSURANCE § 401.13 LIST OF CODE ADMINISTRATORS § 401.14 DECERTIFICATION OR REFUSAL TO CERTIFY
251	§ 401.15 REGISTRATION OF CURRENT CODE ADMINISTRATORS
252	§ 401.16 CHANGE OF ADDRESS OR EMPLOYER CHAPTER 403. ADMINISTRATION GENERALLY
253	GENERALLY § 403.1 SCOPE
257	§ 403.2 OTHER STATUES OR ORDINANCES § 403.3 BUILDING CODE OFFICIAL DELEGATION STANDARDS
258	§ 403.21 UNIFORM CONSTRUCTION CODE
261	FIGURE A
265	§ 403.22 HEALTH CARE FACILITIES
266	§ 403.23 CHILD DAY CARE FACILITIES
267	§ 403.24 HISTORIC BUILDINGS, STRUCTURES AND SITES
268	§ 403.25 MANUFACTURED AND INDUSTRIALIZED HOUSING
269	§ 403.26 SWIMMING POOLS
270	§ 403.27 APPLICABILITY AND USE OF STANDARDS § 403.28 UNCERTIFIED BUILDINGS
272	PERMIT AND INSPECTION PROCESS FOR COMMERCIAL CONSTRUCTION § 403.41 COMMERCIAL CONSTRUCTION § 403.42 PERMIT REQUIREMENTS AND EXEMTIONS
275	§ 403.42a PERMIT APPLICATION
278	§ 403.43 GRANT, DENIAL AND EFFECT OF PERMITS
279	§ 403.44 ALTERNATIVE CONSTRUCTION MATERIALS AND METHODS
280	§ 403.45 INSPECTIONS
281	§ 403.46 CERTIFICATE OF OCCUPANCY
282	§ 403.47 PUBLIC UTILITY CONNECTIONS
283	§ 403.48 BOILERS PERMIT AND INSPECTION PROCESS FOR RESIDENTIAL BUILDINGS § 403.61 RESIDENTIAL BUILDINGS § 403.62 PERMIT REQUIREMENTS AND EXEMPTIONS
284	§ 403.62a PERMIT APPLICATION
285	§ 403.63 GRANT, DENIAL AND EFFECT OF PERMITS
287	§ 403.64 INSPECTIONS
288	§ 403.65 CERTIFICATE OF OCCUPANCY
289	§ 403.66 PUBLIC UTILITY CONNECTIONS DEPARTMENT, MUNICIPAL AND THIRD-PARTY ENFORCEMENT FOR NONCOMPLIANCE § 403.81 STOP WORK ORDER
290	§ 403.82 NOTICE OF VIOLATIONS § 403.83 ORDER TO SHOW CAUSE/ORDER TO VACATE
291	§ 403.84 UNSAFE BUILDING, STRUCTURE OR EQUIPMENT
292	§ 403.85 RELEASE, RETENTION AND SHARING OF COMMERICAL CONSTRUCTION RECORDS
293	§ 403.86 RIGHT OF ENTRY TO INSPECT MUNICIPAL ELECTION § 403.101 EFFECTIVE DATE
294	§ 403.102 MUNICIALITIES ELECTING TO ENFORCE THE UNIFORM CONSTRUCTION CODE
297	§ 403.103 MUNICIPALITIES ELECTING NOT TO ENFORCE THE UNIFORM CONSTRUCTION CODE
298	§ 403.104 DEPARTMENT REVIEW BOARD OF APPEALS § 403.121 BOARD OF APPEALS
299	§ 403.122 APPEALS, VARIANCES AND EXTENSIONS OF TIME
301	DEPARTMENT ENFORCEMENT § 403.141 ENFORCEMENT BY THE DEPARTMENT
302	§ 403.142 ACCESSIBILITY ADVISORY BOARD
304	ICC DIGITAL CODES PREMIUM
305	ICC LEARNING CENTER
306	ICC ASSESSMENT CENTER
307	ICC EVALUATION SERVICE

PA PhiladelphiaPlumbingCode 2018

Sun, 20 Oct 2024 02:49:22 +0000

This is a fully integrated code based on the 2018 International Plumbing Code

PDF Catalog

PDF Pages	PDF Title
1	2018 PHILADELPHIA PLUMBING CODE
2	COPYRIGHT
3	PREFACE
5	EFFECTIVE USE OF THE PHILADELPHIA PLUMBING CODE
9	TABLE OF CONTENTS
13	CHAPTER 1 SCOPE AND ADMINISTRATION SECTION P-101 GENERAL SECTION P-102 INSPECTIONS AND TESTING
14	SECTION P-103 PERMITS AND LICENSES
15	SECTION P-104 TEMPORARY EQUIPMENT, SYSTEMS AND USES SECTION P-105 REGULATIONS SECTION P-106 PLUMBING ADVISORY BOARD
17	CHAPTER 2 DEFINITIONS SECTION 201 GENERAL SECTION 202 GENERAL DEFINITIONS
25	CHAPTER 3 GENERAL REGULATIONS SECTION 301 GENERAL SECTION 302 EXCLUSION OF MATERIALS DETRIMENTAL TO THE SEWER SYSTEM SECTION 303 MATERIALS SECTION 304 RODENTPROOFING
26	SECTION 305 PROTECTION OF PIPES AND PLUMBING SYSTEM COMPONENTS SECTION 306 TRENCHING, EXCAVATION AND BACKFILL
27	SECTION 307 STRUCTURAL SAFETY SECTION 308 PIPING SUPPORT TABLE P-308.5 HANGER SPACING
28	TABLE P-308.5—continued HANGER SPACING SECTION 309 FLOOD HAZARD RESISTANCE SECTION 310 WASHROOM AND TOILET ROOM REQUIREMENTS SECTION 311 TOILET FACILITIES FOR WORKERS
29	TABLE P-311.1 MINIMUM NUMBER OF TOILET FACILITIES SECTION 312 TESTS AND INSPECTIONS
30	SECTION 313 EQUIPMENT EFFICIENCIES SECTION 314 CONDENSATE DISPOSAL
31	[M] TABLE 314.2.2 CONDENSATE DRAIN SIZING SECTION 315 PENETRATIONS SECTION 316 ALTERNATIVE ENGINEERED DESIGN
33	CHAPTER 4 FIXTURES, FAUCETS AND FIXTURE FITTINGS SECTION 401 GENERAL SECTION 402 FIXTURE MATERIALS SECTION 403 MINIMUM PLUMBING FACILITIES TABLE 403.1 MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2)
34	TABLE 403.1 —continued MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2)
35	TABLE 403.1 —continued MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2)
37	SECTION 404 ACCESSIBLE PLUMBING FACILITIES SECTION 405 INSTALLATION OF FIXTURES
38	SECTION 406 AUTOMATIC CLOTHES WASHERS SECTION 407 BATHTUBS SECTION 408 BIDETS SECTION 409 DISHWASHING MACHINES
39	SECTION 410 DRINKING FOUNTAINS SECTION 411 EMERGENCY SHOWERS AND EYEWASH STATIONS SECTION 412 FAUCETS AND FIXTURE FITTINGS
40	SECTION 413 FLOOR AND TRENCH DRAINS SECTION 414 FLOOR SINKS SECTION 415 FLUSHING DEVICES FOR WATER CLOSETS AND URINALS
41	SECTION 416 FOOD WASTE DISPOSER UNITS SECTION 417 GARBAGE CAN WASHERS SECTION 418 LAUNDRY TRAYS SECTION 419 LAVATORIES SECTION 420 MANUAL FOOD AND BEVERAGE DISPENSING EQUIPMENT SECTION 421 SHOWERS
42	SECTION 422 SINKS SECTION 423 SPECIALTY PLUMBING FIXTURES
43	SECTION 424 URINALS SECTION 425 WATER CLOSETS SECTION 426 WHIRLPOOL BATHTUBS
45	CHAPTER 5 WATER HEATERS SECTION 501 GENERAL SECTION 502 INSTALLATION
46	SECTION 503 CONNECTIONS SECTION 504 SAFETY DEVICES
47	SECTION 505 INSULATION
49	CHAPTER 6 WATER SUPPLY AND DISTRIBUTION SECTION 601 GENERAL SECTION 602 WATER REQUIRED SECTION 603 WATER SERVICE
50	SECTION P-604 DESIGN OF BUILDING WATER SUPPLY SYSTEM TABLE P-604.3 WATER SUPPLY SYSTEM DESIGN CRITERIA REQUIRED CAPACITY AT FIXTURE SUPPLY PIPE OUTLETS TABLE 604.4 MAXIMUM FLOW RATES AND CONSUMPTION FOR PLUMBING FIXTURES AND FIXTURE FITTINGS
51	TABLE 604.5 MINIMUM SIZES OF FIXTURE WATER SUPPLY PIPES TABLE 604.10.1 MANIFOLD SIZING SECTION 605 MATERIALS, JOINTS AND CONNECTIONS
52	TABLE P-605.3 WATER DISTRIBUTION PIPE
53	TABLE P-605.4 WATER SUPPLY PIPE TABLE 605.8 MANUFACTURED PIPE NIPPLES
54	TABLE 605.5 PIPE FITTINGS TABLE 605.7 VALVES
57	SECTION P-606 INSTALLATION OF THE BUILDING WATER SUPPLY SYSTEM
58	TABLE 606.5.4 SIZES FOR OVERFLOW PIPES FOR WATER SUPPLY TANKS TABLE 606.5.7 SIZE OF DRAIN PIPES FOR WATER TANKS SECTION 607 HOT WATER SUPPLY SYSTEM
59	SECTION 608 PROTECTION OF POTABLE WATER SUPPLY
60	TABLE 608.1 APPLICATION OF BACKFLOW PREVENTERS
61	FIGURE 608.9.1 PICTOGRAPH—DO NOT DRINK TABLE 608.9.2.2 SIZE OF PIPE IDENTIFICATION
63	TABLE 608.16.1 MINIMUM REQUIRED AIR GAPS
64	TABLE 608.18.1 DISTANCE FROM CONTAMINATION TO PRIVATE WATER SUPPLIES AND PUMP SUCTION LINES
65	SECTION 609 HEALTH CARE PLUMBING SECTION 610 DISINFECTION OF POTABLE WATER SYSTEM SECTION 611 DRINKING WATER TREATMENT UNITS SECTION 612 SOLAR SYSTEMS
66	SECTION 613 TEMPERATURE CONTROL DEVICES AND VALVES SECTION P-614 PRIVATE WATER INFRASTRUCTURE SECTION P-615 ABANDONED WATER SUPPLY SYSTEM AND COMPONENTS
67	CHAPTER 7 SANITARY DRAINAGE SECTION 701 GENERAL SECTION 702 MATERIALS TABLE 702.1 ABOVE-GROUND DRAINAGE AND VENT PIPE
68	TABLE P-702.2 UNDERGROUND BUILDING DRAINAGE AND VENT PIPE TABLE P-702.3 BUILDING SEWER PIPE
69	TABLE 702.4 PIPE FITTINGS SECTION 703 BUILDING SEWER SECTION 704 DRAINAGE PIPING INSTALLATION
70	TABLE P-704.1 SLOPE OF HORIZONTAL DRAINAGE PIPE SECTION 705 JOINTS
72	TABLE 705.18 CAULKING FERRULE SPECIFICATIONS TABLE 705.19 SOLDERING BUSHING SPECIFICATIONS
73	SECTION 706 CONNECTIONS BETWEEN DRAINAGE PIPING AND FITTINGS TABLE 706.3 FITTINGS FOR CHANGE IN DIRECTION SECTION 707 PROHIBITED JOINTS AND CONNECTIONS SECTION 708 CLEANOUTS
74	SECTION 709 FIXTURE UNITS TABLE 709.2 DRAINAGE FIXTURE UNITS FOR FIXTURE DRAINS OR TRAPS
75	TABLE P-709.1 DRAINAGE FIXTURE UNITS FOR FIXTURES AND GROUPS
76	SECTION 710 DRAINAGE SYSTEM SIZING TABLE P-710.1(1) BUILDING DRAINS AND SEWERS TABLE 710.1(2) HORIZONTAL FIXTURE BRANCHES AND STACKSa SECTION 711 OFFSETS IN DRAINAGE PIPING IN BUILDINGS OF FIVE STORIES OR MORE
77	SECTION 712 SUMPS AND EJECTORS
78	TABLE 712.4.2 MINIMUM CAPACITY OF SEWAGE PUMP OR SEWAGE EJECTOR SECTION 713 COMPUTERIZED DRAINAGE DESIGN SECTION 714 BACKWATER VALVES SECTION 715 VACUUM DRAINAGE SYSTEMS SECTION 716 REPLACEMENT OF UNDERGROUND BUILDING SEWERS AND BUILDING DRAINS BY PIPE-BURSTING METHODS
79	SECTION P-717 PRIVATE SANITARY SEWER INFRASTRUCTURE
81	CHAPTER 8 INDIRECT/SPECIAL WASTE SECTION 801 GENERAL SECTION 802 INDIRECT WASTES
82	SECTION 803 SPECIAL WASTES
83	CHAPTER 9 VENTS SECTION 901 GENERAL SECTION 902 MATERIALS SECTION 903 VENT TERMINALS SECTION 904 OUTDOOR VENT EXTENSIONS
84	SECTION 905 VENT CONNECTIONS AND GRADES SECTION 906 VENT PIPE SIZING SECTION 907 VENTS FOR STACK OFFSETS
85	TABLE 906.1 SIZE AND DEVELOPED LENGTH OF STACK VENTS AND VENT STACKS
86	TABLE 906.5.1 SIZE AND LENGTH OF SUMP VENTS SECTION 908 RELIEF VENTS—STACKS OF MORE THAN 10 BRANCH INTERVALS SECTION 909 FIXTURE VENTS TABLE 909.1 MAXIMUM DISTANCE OF FIXTURE TRAP FROM VENT SECTION 910 INDIVIDUAL VENT SECTION 911 COMMON VENT
87	TABLE 911.3 COMMON VENT SIZES SECTION 912 WET VENTING TABLE 912.3 WET VENT SIZE SECTION 913 WASTE STACK VENT TABLE 913.4 WASTE STACK VENT SIZE
88	SECTION 914 CIRCUIT VENTING SECTION 915 COMBINATION WASTE AND VENT SYSTEM TABLE 915.2.2 SIZE OF COMBINATION WASTE AND VENT PIPE SECTION 916 ISLAND FIXTURE VENTING
89	SECTION 917 SINGLE-STACK VENT SYSTEM TABLE 917.2 SINGLE STACK SIZE
90	SECTION 918 AIR ADMITTANCE VALVES SECTION P-919 PHILADELPHIA SINGLE-STACK WASTE AND VENT SYSTEM
91	TABLE P-919.2(a) FIXTURE-UNIT VALUES
92	TABLE P-919.2(b) OTHER FIXTURE VALUES TABLE P-919.2(c) MINIMUM PIPE SIZES ACCORDING TO FIXTURE LOAD (Maximum Fixture Units that may be Connected)
94	TABLE P-919.9(a) SIZE AND LENGTH OF VENTS SECTION 920 RESERVED
95	CHAPTER 10 TRAPS, INTERCEPTORS AND SEPARATORS SECTION 1001 GENERAL SECTION 1002 TRAP REQUIREMENTS
96	SECTION 1003 INTERCEPTORS AND SEPARATORS
97	TABLE 1003.3.5.1 CAPACITY OF GREASE INTERCEPTORSa
98	SECTION 1004 MATERIALS, JOINTS AND CONNECTIONS
99	CHAPTER 11 STORM DRAINAGE SECTION 1101 GENERAL SECTION 1102 MATERIALS
100	TABLE P-1102.4 BUILDING STORM SEWER PIPE TABLE 1102.5 SUBSOIL DRAIN PIPE TABLE 1102.7 PIPE FITTINGS SECTION 1103 TRAPS
101	SECTION 1104 CONDUCTORS AND CONNECTIONS SECTION 1105 ROOF DRAINS SECTION 1106 SIZE OF CONDUCTORS, LEADERS AND STORM DRAINS TABLE 1106.2 STORM DRAIN PIPE SIZING TABLE 1106.3 VERTICAL LEADER SIZING
102	TABLE 1106.6 HORIZONTAL GUTTER SIZING SECTION 1107 SIPHONIC ROOF DRAINAGE SYSTEMS SECTION 1108 SECONDARY (EMERGENCY) ROOF DRAINS
103	SECTION 1109 COMBINED SANITARY AND STORM PUBLIC SEWER TABLE P-1109.4 SIZE OF HORIZONTAL STORM DRAINAGE PIPING
104	SECTION 1110 CONTROLLED FLOW ROOF DRAIN SYSTEMS SECTION 1111 SUBSOIL DRAINS SECTION 1112 BUILDING SUBDRAINS SECTION 1113 SUMPS AND PUMPING SYSTEMS SECTION P-1114 SUSTAINABLE GREEN ROOF DRAINAGE SYSTEMS SECTION P-1115 PRIVATE STORM SEWER INFRASTRUCTURE
107	CHAPTER 12 SPECIAL PIPING AND STORAGE SYSTEMS SECTION 1201 GENERAL SECTION 1202 MEDICAL GASES SECTION 1203 OXYGEN SYSTEMS
109	CHAPTER 13 NONPOTABLE WATER SYSTEMS SECTION 1301 GENERAL FIGURE 1301.3 PICTOGRAPH—DO NOT DRINK
111	SECTION 1302 ON-SITE NONPOTABLE WATER REUSE SYSTEMS
112	TABLE 1302.7.1 LOCATION OF NONPOTABLE WATER REUSE STORAGE TANKS
113	SECTION 1303 NONPOTABLE RAINWATER COLLECTION AND DISTRIBUTION SYSTEMS
114	TABLE 1303.10.1 LOCATION OF RAINWATER STORAGE TANKS
115	SECTION 1304 RECLAIMED WATER SYSTEMS
117	CHAPTER 14 RESERVED
119	CHAPTER 15 REFERENCED STANDARDS ANSI ASHRAE ASME
121	ASPE ASSE
123	ASTM
128	AWS AWWA
129	CISPI CSA
132	IAPMO ICC ISEA MSS
133	NFPA NGWA NSF
134	PDI PSAI UL
135	APPENDICES A–D RESERVED
137	APPENDIX E SIZING OF WATER PIPING SYSTEM SECTION E101 GENERAL SECTION E102 INFORMATION REQUIRED SECTION E103 SELECTION OF PIPE SIZE
141	TABLE E.1 TABLE E.2
142	FIGURE E103.3(1) EXAMPLE-SIZING
143	TABLE E103.3(1) RECOMMENDED TABULAR ARRANGEMENT FOR USE IN SOLVING PIPE SIZING PROBLEMS
144	TABLE E103.3(2) LOAD VALUES ASSIGNED TO FIXTURESa
145	TABLE E103.3(3) TABLE FOR ESTIMATING DEMAND
146	TABLE E103.3(3)-continued TABLE FOR ESTIMATING DEMAND TABLE E103.3(4) LOSS OF PRESSURE THROUGH TAPS AND TEES IN POUNDS PER SQUARE INCH
147	TABLE E103.3(5) ALLOWANCE IN EQUIVALENT LENGTHS OF PIPE FOR FRICTION LOSS IN VALVES AND THREADED FITTINGS TABLE E103.3(6) PRESSURE LOSS IN FITTINGS AND VALVES EXPRESSED AS EQUIVALENT LENGTH OF TUBE
148	FIGURE E103.3(2) FRICTION LOSS IN SMOOTH PIPEa (TYPE K, ASTM B88 COPPER TUBING)
149	FIGURE E103.3(3) FRICTION LOSS IN SMOOTH PIPEa (TYPE L, ASTM B88 COPPER TUBING)
150	FIGURE E103.3(4) FRICTION LOSS IN SMOOTH PIPEa (TYPE M, ASTM B88 COPPER TUBING)
151	FIGURE E103.3(5) FRICTION LOSS IN FAIRLY SMOOTH PIPEa
152	FIGURE E103.3(6) FRICTION LOSS IN FAIRLY ROUGH PIPEa
153	FIGURE E103.3(7) FRICTION LOSS IN ROUGH PIPEa
154	SECTION E201 SELECTION OF PIPE SIZE SECTION E202 DETERMINATION OF PIPE VOLUMES
155	TABLE E201.1 MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES
156	TABLE E201.1—continued MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES
157	TABLE E202.1 INTERNAL VOLUME OF VARIOUS WATER DISTRIBUTION TUBING
159	APPENDIX F FIGURES FIGURE 202(4) AIR GAP, AIR BREAK FIGURE 202(5) DEFINITION OF BRANCH INTERVAL
160	FIGURE 202(6) BRANCH INTERVALS
161	FIGURE 202(7) BRANCH VENT FIGURE 202(8) DRAINAGE SYSTEM COMPONENTS
162	FIGURE 202(9) DEPTH OF TRAP SEAL FIGURE 202(16) PARTS OF A PLUMBING SYSTEM
163	FIGURE 305.2(4) “U” BEND FIGURE 305.2(3) “Z” BEND FIGURE 305.3(1) PIPE PROTECTION
164	FIGURE 305.4(4) TYPICAL FREEZEPROOF HOSE FAUCET INSTALLATION FIGURE 306.2 PIPE ON BOTTOM OF TRENCH
165	FIGURE 306.2.1 OVEREXCAVATED TRENCH FIGURE 306.3 TAMPING LOOSE FILL IN 6-INCH LAYERS FIGURE 307.2(10) REQUIRED TOP PLATE REINFORCEMENT
166	FIGURE 307.3(1) THROUGH PENETRATION OF ASSEMBLIES FIGURE 307.3(2) MEMBRANE PENETRATION OF ASSEMBLY
167	FIGURE 307.5 EXCAVATION IN RELATION TO FOOTING FIGURE 308.5(1) POINT OF MAXIMUM SAGE BETWEEN SUPPORTS FIGURE 308.5(2) LOCATION OF HANGERS
168	FIGURE 308.6 SWAY BRACING FIGURE 308.7 RESTRAINED COUPLING FIGURE 308.7.1 ANCHORAGE LOCATION
169	FIGURE 312.9 TESTING OF FIELD-FABRICATED SHOWER LINER FIGURE 405.4(1) WATER CLOSET FLOOR FLANGE FIGURE 405.4(2) GASKETED WASTE TUBE CONNECTION FOR WATER CLOSET
170	FIGURE 405.4.3 WALL-HUNG WATER CLOSET FIGURE 405.6(1) JOINTS BETWEEN FIXTURES AND WALLS OR FLOORS FIGURE 409.4 RESIDENTIAL DISHWASHER WASTE CONNECTIONS
171	FIGURE 412.4 DELIVERED WATER TEMPERATURE LIMITS AND TEMPERATURE CONTROL OR DEVICE FIGURE 416.3 COMMERCIAL FOOD WASTE DISPOSER
172	FIGURE P-418.1 LAUNDRY TRAY FIGURE 419.1 LAVATORY FIGURE P-422.1(1) COMBINATION SINK AND TRAY FIGURE P-422.1(2) DOUBLE BOWL SINK FIGURE P-422.1(3) KITCHEN SINK FIGURE P-422.1(4) KITCHEN SINK
173	FIGURE 425.4 ACCEPTABLE 4 × 3 CLOSET BENDS FIGURE 504.4.1 TEMPERATURE- AND PRESSURE-RELIEF FIGURE 504.6(1) RELIEF VALVE DISCHARGE FIGURE 504.6(3) RELIEF VALVE DISCHARGE DRAINAGE PIPING SYSTEM
174	FIGURE 603.1(1) WATER SERVICE SYSTEM, PUBLIC WATER MAIN FIGURE 603.2(1) SEPARATION OF WATER SERVICE AND BUILDING SEWER
175	FIGURE 603.2(2) WATER SERVICE CROSSING OVER BUILDING SEWER FIGURE 604.1(2) WATER SYSTEM SCHEMATIC, THREE-STORY COMPACT BUILDING
176	FIGURE 604.1(4) WATER SYSTEM SCHEMATIC, SINGLE-STORY, 16-UNIT MOTEL FIGURE 604.1(8) WATER SYSTEM SCHEMATIC, EIGHT-STORY, 96-UNIT APARTMENT BUILDING
177	FIGURE 604.5 WATER SUPPLY CONNECTION WITH REDUCED-SIZE FLEXIBLE SUPPLY FIGURE 604.9(1) EXAMPLE OF MECHANICAL WATER-HAMMER ARRESTORS FIGURE 605.3(1) TYPICAL WATER DISTRIBUTION PIPE ENTRY INTO BUILDING
178	FIGURE 605.3(2) WATER SERVICE EXTENDING INTO BUILDING FIGURE 605.12.1 HEAT APPLICATION OF BRAZED JOINT FIGURE 605.12.3 PREPARATION OF PIPE END
179	FIGURE 605.13.2(1) TYPICAL FLARED TUBE JOINT FIGURE 605.13.2(2) TYPICAL FLARED TUBE JOINT FIGURE 605.18.4 BENDING PE PLASTIC PIPE FIGURE 605.23.1(2) DIELECTRIC UNION FIGURE 605.23.1(3) DIELECTRIC FLANGE FITTING
180	FIGURE 606.1(1) CURB VALVE ON WATER SERVICE FIGURE 606.1(2) VALVE AT ENTRANCE TO BUILDING AND ON DISCHARGE SIDE OF METER FIGURE 606.1(3) VALVES FOR EACH RISER AND DOWNFEED
181	FIGURE 606.1(4) DWELLING UNIT VALVES FIGURE 606.1(5) VALVES ON SUPPLY TO EACH TANK FIGURE 606.1(6) WATER HEATER VALVE
182	FIGURE 606.2(1) SHUTOFF VALVE FOR EACH FIXTIRE FIGURE 606.2(2) SILL FAUCET VALVE FIGURE 607.2 TEMPERATURE MAINTENANCE SYSTEM FOR HOT WATER USING PUMPED CIRCULATION LOOP
183	FIGURE 607.2.2(1) PROPER ARRANGEMENT FOR TEMPERED WATER RECIRCULATION RETURN FIGURE 607.3 THERMAL EXPANSION CONTROL USING THERMAL FIGURE 608.1(3) PRESSURE EXERTED BY A COLUMN OF WATER
184	FIGURE 608.1(4) BASE PRESSURE FIGURE 608.1(5) COLUMN OF WATER EXPOSED TO ATMOSPHERE FIGURE 608.1(6) OPEN TUBE INSERTED IN CONTAINER OF WATER FIGURE 608.1(7) VACUUM APPLIED TO A SEALED TUBE INSERTED IN A CONTAINER OF WATER
185	FIGURE 608.1(8) EXAMPLE OF SIMPLE SIPHON FIGURE 608.1(9) EXAMPLE OF ASPIRATION, OR VENTURI PRINCIPLE FIGURE 608.1(10) EXAMPLE OF PUMP CAUSING NEGATIVE PRESSURE
186	FIGURE 608.7.1 CONNECTION BETWEEN TWO SYSTEMS FIGURE 608.14.4 BAROMETRIC LOOP FIGURE 608.14.5 PRESSURE VACUUM BREAKER FIGURE 608.14.7 DOUBLE CHECK-VALVE ASSEMBLY
187	FIGURE 608.17.1.1 BEVERAGE DISPONSER FIGURE 608.17.2 FOR BOILER WITHOUT CONDITIONING CHEMICALS FIGURE 609.2 DUAL WATER SERVICE FOR HOSPITALS
188	FIGURE 704.3 ZONE FOR POTENTIAL HYDRAULIC JUMP FIGURE 705.3.1 CAULKED JOINT FOR HUB AND SPIGOT (CAST-IRON) FIGURE 705.3.2 CAST-IRON COMPRESSION GASKET JOINT FIGURE 705.3.3 HUBLESS CAST-IRON DRAINAGE PIPE JOINT FIGURE 705.4 CONCRETE PIPE AND FITTING JOINT
189	FIGURE 705.5.1 HEAT APPLICATION FOR BRAZING JOINT FIGURE 705.5.3 PREPARATION OF PIPE END FIGURE 705.16.3 CAST-IRON ADAPTER FITTING FIGURE 705.17(1) SLIP JOINT, FLAT-RING STYLE
190	FIGURE 705.17(2) SLIP JOINTS, V-SHAPE O-RING STYLE FIGURE 705.17(3) TYPICAL LOCATIONS FOR SLIP JOINTS FIGURE 706.3(1) COMPARISON OF DIFFERENT SWEEP PATTERNS FOR VARIOUS MATERIALS FIGURE 706.3(2) COMPARISON OF COMBINATION WYE AND EIGHTH-BEND PATTERNS FOR VARIOUS MATERIALS
191	FIGURE 706.3(3) DRAINAGE PATTERN FITTINGS FIGURE 706.3(4) DIFFERENCE BETWEEN PVC AND ABS PLASTIC 1/4-BEND SHORT SWEEP AND 1/4-BEND VENT
192	FIGURE 706.3(5) COMBINATION TEES FIGURE 706.3(6) FITTING USES
193	FIGURE 706.3(7) IMPROPER USE OF DWV-PVC/ABS 90-DEGREE FITTINGS FIGURE 706.3(8) PROPER USE OF DWV-PVC/ABS 90-DEGREE FITTINGS FIGURE 706.3(9) BACK-TO-BACK WATER CLOSETS CONNECTED TO DOUBLE SANITARY TEE FIGURE 706.3(10) WATER CLOSET FIXTURE DRAINS CONNECTED TO WYE OR COMBINATION FITTING FIGURE 706.4(1) HEEL- AND SIDE-INLET QUARTER BEND APPLICATION RESTRICTIONS
194	FIGURE 706.4(3) HEEL INLET FITTINGS FIGURE 708.1.3 CLEANOUTS AT BUILDING DRAIN TO BUILDING SEWER JUNCTION
195	FIGURE 708.1.4 CLEANOUTS FIGURE 708.1.5(1) ACCEPTABLE CLEANOUTS
196	FIGURE 708.1.8 TWO-WAY CLEANOUT FITTING FIGURE 708.1.9 CLEARANCE FOR CLEANOUTS FIGURE 708.1.10 CLEANOUT INSTALLATIONS FIGURE 708.1.10.1 CLEANOUTS ON CONCEALED PIPING
197	FIGURE 710.1(1) BUILDING DRAIN SIZING FIGURE 710.1(2) HORIZONTAL BRANCH SIZING
198	FIGURE 710.1(4) STACK SIZING FIGURE 710.1(5) STACK SIZING GREATER THAN THREE BRANCH INTERVALS FIGURE 710.1(6) SIZING OF STACK THREE BRANCH INTERVALS OR LESS
199	FIGURE 710.1(7) FLOW IN A STACK FIGURE 710.1(8) REDUCING SIZE OF DRAINAGE STACK FIGURE 711.1(1) VERTICAL STACK OFFSET WITHOUT BRANCH CONNECTIONS WITHIN 2 FEET ABOVE OR BELOW OFFSET FIGURE 711.1(2) VERTICAL STACK OFFSET WITH BRANCH CONNECTIONS WITHIN 2 FEET ABOVE OR BELOW OFFSET
200	FIGURE 711.2(1) HORIZONTAL STACK OFFSET WITH VENTING FIGURE 711.2(2) HORIZONTAL STACK OFFSET WITH VENTING EXAMPLE
201	FIGURE 711.2.1 HORIZONTAL STACK OFFSET—VENTING NOT REQUIRED FIGURE 711.3(1) VERTICAL OFFSET SIZING WHERE THERE ARE NO STACK CONNECTIONS BELOW OFFSET FIGURE 711.3(2) HORIZONTAL OFFSET SIZING WHERE THERE ARE NO STACK CONNECTIONS BELOW OFFSET
202	FIGURE 712.1(1) PNEUMATIC SEWAGE EJECTOR FIGURE 712.1(2) VERTICAL SUSPENDED WET PIT SEWAGE PUMP FIGURE 712.2 SEWAGE PUMP INSTALLATION
203	FIGURE 712.4.1(2) MACERATING TOILET SYSTEM GRINDER/PUMP FIGURE 714.1 BACKWATER VALVE INSTALLATION
204	FIGURE P-714.1 BACKWATER VALVE FIGURE 714.2 COMMON TYPES OF BACKWATER VALVES
205	FIGURE 802.1.1(1) INDIRECTLY CONNECTED THREE-COMPARTMENT FOOD PREPARATION SINK FIGURE 802.1.1(2) REFRIGERATED FOOD CASE DRAINS INDIRECTLY CONNECTING TO HUB DRAIN
206	FIGURE 802.1.1(3) COMMERCIAL KITCHEN INDIRECT WASTE FIGURE P-802.1.1(4) INDIRECTLY CONNECTED ICE BIN FIGURE P-802.1.1(5) INDIRECTLY CONNECTED ICE MAKER AND BAR SINK FIGURE P-802.1.1(6) REFRIGERATED FOOD CASE DRAINS INDIRECTLY CONNECTING TO HUB DRAIN
207	FIGURE P-802.1.1(7) INDIRECT CONNECTIONS
208	FIGURE P-1003.3.5(1) HYDROMECHANICAL GREASE INTERCEPTOR FIGURE P-1003.3.5(2) HYDROMECHANICAL GREASE INTERCEPTOR FIGURE P-802.1.1(8) INDIRECT CONNECTIONS FIGURE P-802.1.1(9) INDIRECT CONNECTIONS FIGURE P-802.1.1(10) INDIRECT CONNECTIONS
209	FIGURE 802.1.2(1) FLOOR DRAIN IN FOOD STORAGE REFRIGERATOR (NONFREEZING) FIGURE 802.1.2(2) FLOOR DRAIN IN FOOD STORAGE FREEZER, AIR BREAK TERMINATION
210	FIGURE 802.1.2(3) FLOOR DRAIN IN FOOD STORAGE FREEZER, AIR GAP TERMINATIONFIGURE 802.1.3INDIRECT CONNECTION FOR POTABLE CLEAR-WATER WASTEAIR GAPBACKWASH FROM FILTERVENT FOR WASTERECEPTOR FIXTURETRAPTODISPOSALPOINTFIGURE 802.1.4SWIMMING POOL FIGURE 802.1.3 INDIRECT CONNECTION FOR POTABLE CLEAR-WATER WASTE FIGURE 802.1.4 SWIMMING POOL WASTE DISCHARGE THROUGH AIR GAP
211	FIGURE 802.1.5 INDIRECT CONNECTION—NONPOTABLE CLEAR-WATER WASTE
212	FIGURE 802.1.6 COMMERCIAL DISHWASHER INDIRECT WASTE CONNECTIONS WASTE RECEPTORMIN. MIN.= DIAMETER OF THEEFFECTIVE OPENINGFIGURE 802.3.1AIR GAP FIGURE 802.3.1 AIR GAP
213	FIGURE 802.3 TRAP REQUIREMENTS FOR INDIRECT WASTE PIPING FIGURE 802.3.2 AIR BREAK
214	FIGURE 802.4(1) WASTE RECEPTORS FIGURE 802.4(2) WASTE RECEPTORS
215	FIGURE 802.4(3) PROHIBITED LOCATIONS FOR WASTE RECEPTORS FIGURE 802.4.1(1) SHALLOW, FLAT BOTTOM WASTE RECEPTOR FIGURE 802.4.1(2) DEEP, ROUNDED-BOTTOM WASTE RECEPTOR
216	FIGURE 802.4.2 CLEAR-WATER WASTE RECEPTOR FIGURE 802.4.3 STANDPIPES
217	FIGURE 901.2(1) LOSS OF TRAP SEAL FIGURE 901.2(2) MAXIMUM TRAP SEAL RESTSTANCE FIGURE 903.1 VENT TERMINAL
218	FIGURE 903.5 SEPARATION OF VENT TERMINAL FIGURE 903.6 SIDEWALL VENT
219	FIGURE 904.1(1) REDUCTION OF STACK VENT CONNECTION FIGURE 904.1(2) STACK VENT FIGURE 904.1(3) REQUIRED VENT OUTDOORS
220	FIGURE 904.4 VENT CONNECTION AT BASE OF STACK FIGURE 904.5 VENT HEADERS
221	FIGURE 905.2 GRADE OF VENTS FIGURE 905.3 VENT CONNECTIONS
222	FIGURE 905.4 VERTICAL RISE OF VENT
223	FIGURE 905.5(1) IMPROPERLY CONNECTED VENT SERVING A DRAIN FIGURE 905.5(2) PROPERLY CONNECTED VENT SERVING A DRAIN FIGURE 905.5(3) HORIZONTAL BRANCH VENT ELEVATION
224	FIGURE 906.1(1) VENT STACK SIZING FIGURE 906.1(2) VENT STACK SIZING FIGURE 906.1(3) STACK VENT SIZING
225	FIGURE 906.2(1) VENT SIZING FIGURE 906.2(2) VENT SIZING
226	FIGURE 906.2(3) VENT SIZING FIGURE 906.2(4) VENT SIZING
227	FIGURE 906.3(1) DEVELOPED LENGTH VENTS FIGURE 906.3(2) DEVELOPED LENGTH OF VENTS
228	FIGURE 906.4 COMMON BRANCH VENT FIGURE 906.5.1 SUMP VENT
229	FIGURE 907.2 VENT CONNECTIONS FOR HORIZONTAL OFFSET FIGURE 908.1 RELIEF VENT CONNECTION
230	FIGURE 909.1(1) DISTANCE FROM TRAP TO VENT FIGURE 909.1(2) MAXIMUM FALL OF FIXTURE DRAIN BETWEEN TRAP AND VENT
231	FIGURE 909.2(1) TRAP TO VENT DISTANCE FOR WATER CLOSETS FIGURE 909.2(2) VENT CONNECTION
232	FIGURE 909.2(3) SELF-SIPHONING PHENOMENON FIGURE 909.3(1) CROWN VENTING FIGURE 909.3(2) MINIMUM TRAP-TO-VENT DISTANCE
233	FIGURE 910.1(1) INDIVIDUAL VENTS FIGURE 910.1(2) IMPROPERLY INSTALLED INDIVIDUAL VENTS FIGURE 911.1 COMMON VENTS
234	FIGURE 911.2 COMMON VENTS WITH FIXTURE DRAINS CONNECTING AT SAME LEVEL
235	FIGURE 911.3 COMMON VENT WITH FIXTURE DRAINS CONNECTING AT DIFFERENT LEVELS
236	FIGURE 912.1(1) HORIZONTAL WET VENTING OF BATHROOM FIXTURES FIGURE 912.1(2) HORIZONTAL WET VENT WITH INDIVIDUAL VENT FIGURE 912.1(3) HORIZONTAL WET VENT WITH COMMON VENTED FIXTURES UPSTREAM FIGURE 912.1(4) PROHIBITED CONNECTION OF TWO FIGURES UPSTREAM OF DRY-VENT CONNECTION FIGURE 912.1(5) PROHIBITED CONNECTION OF TWO FIXTURES UPSTREAM OF DRY-VENTED FIXTURE CONNECTION- -FIGURE 912.1(6)HORIZONTAL WET FIGURE 912.1(6) HORIZONTAL WET VENT WITH COMMON VENT WITH AN ADDITIONAL DRY-VENTED FIXTURE
237	FIGURE 912.1(7) HORIZONTAL WET VENT WITH THREE ADDITIONAL INDEPENDENTLY VENTED FIXTURES FIGURE 912.1(8) HORIZONTAL WET VENT SIZING (PRIVATE BATH GROUP) FIGURE 912.1(9) HORIZONTAL WET VENT (PUBLIC BATH GROUP) FIGURE 912.1(10) HORIZONTAL WET VENT
238	FIGURE 912.1(11) HORIZONTAL WET VENT FIGURE 912.1(12) HORIZONTAL WET VENT FIGURE 912.(13) NONCOMPLIANT HORIZONTAL WET VENT
239	FIGURE 912.1(14) NONCOMPLIANT HORIZONTAL WET VENT FIGURE 912.1(15) NONCOMPLIANT HORIZONTAL WET VENT FIGURE 912.1(16) NONCOMPLIANT HORIZONTAL WET VENT FIGURE 912.1(17) NONCOMPLIANT HORIZONTAL WET VENT FIGURE 912.1(18) NONCOMPLIANT HORIZONTAL WET VENT
240	FIGURE 912.1(19) MULTIFLOOR WET VENTING FIGURE 912.1(20) SINGLE BATHROOM GROUP (PRIVATE) WET VENT FIGURE 912.1(21) DOUBLE BATHROOM GROUP (PRIVATE) WET VENT FIGURE 912.1(22) WET VENT VARIATIONS FOR A SINGLE BATHROOM GROUP
241	FIGURE 912.1(23) HORIZONTAL WET VENTING FIGURE 912.1(24) MULTIPLE INDIVIDUAL VENTS
242	FIGURE 912.1.1(1) VERTICAL WET VENT OF SINGLE BATHROOM GROUP FIGURE 912.1.1(2) VERTICAL WET VENT OF TWO BATHROOM GROUPS FIGURE 912.1.1(3) VERTICAL WET VENT OF TWO BATHROOM GROUPS
243	FIGURE 912.1.1(4) VERTICAL WET VENTING FIGURE 913.2(1) WASTE STACK VENT
244	FIGURE 913.2(2) WASTE STACK VENT FIGURE 913.3 WASTE STACK VENT OFFSETS AND STACK VENT CONNECTIONS
245	FIGURE 914.1(1) CIRCUIT VENTING
246	FIGURE 914.1.1 MULTIPLE CIRCUIT-VENTED BRANCHES FIGURE 914.2 BACK-TO-BACK WATER CLOSETS CIRCUIT VENTED FIGURE 914.3 SIZING A CIRCUIT-VENT SYSTEM
247	FIGURE 914.3.1 SIZING MULTIPLE CIRCUIT-VENTED BRANCHES FIGURE 914.4.1 CIRCUIT VENT WITH RELIEF VENT CONNECTION FIGURE 914.5(1) CIRCUIT-VENTED BRANCH WITH ADDITIONAL FIXTURE CONNECTIONS
248	FIGURE 914.5(2) CIRCUIT-VENTED BRANCH WITH ADDITIONAL FIXTURE CONNECTIONS FIGURE 915.2(1) COMBINATION WASTE AND VENT
249	FIGURE 915.2(2) COMBINATION WASTE AND VENT FIGURE 915.2(3) COMBINATION WASTE AND VENT
250	FIGURE 915.2(4) COMBINATION WASTE AND VENT
251	FIGURE 915.2(5) VERTICAL FIXTURE DRAIN COMPONENT IN COMBINATION WASTE AND VENT SYSTEM 915.2.3(1) COMBINATION WASTE AND VENT
252	FIGURE 915.2.3(2) COMBINATION WASTE AND VENT FIGURE 915.2.3(3) COMBINATION WASTE AND VENT
253	FIGURE 915.2.3(4) COMBINATION WASTE AND VENT FIGURE 915.2.3(5) COMBINATION WASTE AND VENT
254	FIGURE 916.2 ISLAND FIXTURE VENT FIGURE 917.3(1) WATER CLOSET WITHIN 18 INCHES OF STACK AND 3-INCH HORIZONTAL BRANCH CONNECTING TO WYE ON STACK FIGURE 917.3(2) WATER CLOSET WITHIN 18 INCHES OF STACK AND 3-INCH HORIZONTAL BRANCH CONNECTING TO SANITARY TEE ON STACK
255	FIGURE 917.4.1(1) WATER CLOSETS NOT MORE THAN 4 FEET FROM STACK WHEN BRANCH CONNECTS THROUGH WYE TO STACK
256	FIGURE 917.4.1(2) WATER CLOSETS NOT MORE THAN 8 FEET FROM STACK WHEN BRANCH CONNECTS THROUGH SANITARY TEE TO STACK
257	FIGURE 917.4.2 MAXIMUM HORIZONTAL DEVELOPED LENGTH FROM STACK FOR FIXTURES OTHER THAN WATER CLOSETS FIGURE 917.7 OFFSET VENTING REQUIREMENT FOR SINGLE-STACK VENT SYSTEM
258	FIGURE 917.8 LOWER TWO FLOORS ON SEPARATE STACK FIGURE 918.3.1(1) AIR ADMITTANCE—INDIVIDUAL VENT
259	FIGURE 919.1(1) PHILADELPHIA SINGLE STACK AND HORIZONTAL BRANCH DRAINS VENTED BY BRANCH VENTS OR SOIL AND WASTE STACKS
260	FIGURE 919.1(2) PHILADELPHIA SOIL OR WASTE STACK SYSTEM AND HORIZONTAL BRANCH DRAIN AND BRANCH VENT
261	FIGURE 919.1(3) CIRCUIT AND LOOP VENTING FOR FLOOR MOUNTED WATER CLOSETS AND SMALL FIXTURES
262	FIGURE 919.1(4) CIRCUIT AND LOOP VENTING FOR WALL HUNG WATER CLOSETS AND SMALL FIXTURES
263	FIGURE P-919.2.10 RELIEF VENT SIZING
264	FIGURE P-919.4.1 VELOCITY BREAKS IN BUILDINGS OVER 30 STORIES
265	FIGURE P-919.5.1 CONTINUOUS, LOOP AND CIRCUIT VENT
266	FIGURE P-919.5.2(1) BATHROOM GROUP W/ IDEAL BEND FIGURE P-919.5.2(2) WATER CLOSET WITHIN 48″ OF EXISTING STACK FIGURE P-919.5.3 BATHROOM GROUP W/ MERION FITTING FIGURE P-919.5.4 WATER CLOSET IN EXCESS OF 48″ OF EXISTING STACK
267	FIGURE P-919.6.1 SINGLE WASTE BRANCHES IN EXCESS OF 8′-0″ AND 12′-0″ VENTING REQUIREMENTS
268	FIGURE P-919.7.12 YOKE VENTING OFFSETS FIGURE P-919.7.3 SEPARATE VENTING FIGURE P-919.7.4 OFFSET OF SOIL STACK IN BUILDINGS 3-STORIES and LESS FIGURE P-919.8.1 COMMON VENT HEADER
269	FIGURE P-919.9.3 VENT STACK SIZING
270	FIGURE 1002.1(1) TRAP REQUIREMENTS FIGURE 1002.2 SLIP JOINTS IN TRAPS
271	FIGURE 1002.3 PROHIBITED TRAPS FIGURE P-1002.4.1.1 TRAP PRIMERS IN RECEIVERS NOT RECEIVING CONSTANT WATER DISCHARGE
272	FIGURE P-1002.6 BUILDING (HOUSE) TRAPS
273	FIGURE 1002.7 INSTALLATION OF TRAP FIGURE 1003.2 INTERCEPTORS AND SEPARATORS FIGURE 1003.3(1) TYPICAL GRAVITY-TYPE GREASE INTERCEPTOR
274	FIGURE 1003.3.1(1) TYPICAL SINGLE-FIXTURE INSTALLATIONS FIGURE 1003.3.1(2) GREASE INTERCEPTOR FOR FIXTURES
275	FIGURE 1003.1(3) AUTOMATIC GREASE INTERCEPTOR FIGURE 1003.3.1(4) SENSOR-CONTROLLED GREASE RECOVERY DEVICE
276	FIGURE 1003.3.1(5) BIOREMEDIATION GREASE INTERCEPTOR FIGURE 1003.3.2 FOOD WASTE DISPOSER CONNECTING TO GREASE INTERCEPTOR
277	FIGURE 1003.3.5.2 FLOW CONTROL DEVICE FIGURE 1003.9 VENTING OF INTERCEPTORS AND SEPARATORS
278	FIGURE 1101.7 ROOF DRAIN WITH SCUPPER OVERFLOW
279	FIGURE P-1103.1(1) PARKING GARAGE DRAINAGE ONE-PIPE SYSTEM FIGURE P-1103.1(2) STORM WATER CATCH BASIN DETAIL
280	FIGURE 1103.1 TRAPS ON STORM DRAINS THAT CONNECT TO EXISTING COMBINED SANITARY AND STORM SEWER SYSTEMS FIGURE 1106.4 VERTICAL WALLS
281	FIGURE 1108.1 SECONDARY ROOF DRAINAGE NOT REQUIRED FIGURE 1108.2(1) SEPARATE PRIMARY AND SECONDARY ROOF DRAIN
282	FIGURE 1108.2(2) PROHIBITED SECONDARY ROOF DRAIN CONNECTION FIGURE 1110.4 MINIMUM NUMBER OF ROOF DRAINS FOR CONTROLLED FLOW
283	FIGURE 1111.1(2) SUBSOIL DRAIN
285	APPENDIX G LICENSING REQUIREMENTS SECTION G101 DEFINITIONS SECTION G102 GENERAL LICENSE REQUIREMENTS SECTION G103 MASTER PLUMBER
286	SECTION G104 JOURNEYMAN PLUMBER SECTION G105 APPRENTICE PLUMBER SECTION G106 FEES SECTION G107 RULES OF CONDUCT
287	SECTION G108 LICENSE SUSPENSION AND REVOCATION; OTHER REMEDIES SECTION G109 PENALTIES
289	INDEX
301	HELPFUL TOOLS FOR LEARNING AND APPLYING YOUR PLUMBING CODE
302	ICC MEMBERSHIP
303	ICC ASSESSMENT CENTER
304	ICC EVALUATION SERVICE

PA ChangestoUCC 2018.pdf

Sat, 19 Oct 2024 13:26:43 +0000

2020 City of Los Angeles amendment pages for integration with the 2019 California Building Code

PDF Catalog

PDF Pages	PDF Title
1	2018 CHANGES TO THE PENNSYLVANIA UNIFORM CONSTRUCTION CODE
2	2018 CHANGES TO THE PENNSYLVANIA UNIFORM CONSTRUCTION CODE TITLE PAGE
3	COPYRIGHT
4	CONTENTS
6	PREFACE
7	ABOUT THE PENNSYLVANIA UNIFORM CONSTRUCTION CODE (UCC) ABOUT PENNSYLVANIA ACCESSIBILITY PROVISIONS
8	ABOUT THE ICC ABOUT THE PA UCC REVIEW AND ADVISORY COUNCIL
9	ABOUT THE PA DEPARTMENT OF LABOR & INDUSTRY ABOUT THE PENNSYLVANIA BUILDING OFFICIALS CONFERENCE ABOUT THE PENNSYLVANIA CHAPTER OF THE AMERICAN INSTITUTE OF ARCHITECTS
10	ABOUT THE PENNSYLVANIA BUILDERS ASSOCIATION ACKNOWLEDGEMENTS
11	ABOUT ICC TRANSITION SERIES
12	PART 1 INTERNATIONAL BUILDING CODE CHAPTERS 9 AND 26
13	IBC 913.2.2, IFC 913.2.2 CIRCUITS SUPPLYING FIRE PUMPS FIGURE 1-1 FIRE PUMP
14	IBC 2609.4 AREA LIMITATIONS FIGURE 1-2 LARGE INDUSTRIAL GREENHOUSE
15	IBC 3006 ELEVATOR LOBBIES AND HOISTWAY OPENING PROTECTION
17	FIGURE 1-3 ELEVATOR LOBBY
18	PART 2 INTERNATIONAL RESIDENTIAL CODE CHAPTERS 3, 5, 6, 16, 25 AND 39
19	IRC R302.5.1 OPENING PROTECTION FIGURE 2-1 DOOR FROM GARAGE TO DWELING DOES NOT NEED SELF-CLOSING DEVICE
20	IRC R322.2.1, IRC R322.3.2 ELEVATION REQUIREMENTS
22	FIGURE 2-2 NOTE: REFER TO LOCAL FLOODPLAIN ORDINANCES TO DETERMINE MINIMUM FREEBOARD REQUIREMENTS
23	IRC R325.5 OPENNESS FIGURE 2-3 RESIDENTIAL MEZZANINE
24	IRC TABLE R507.5 DECK BEAM SPAN LENGTHS TABLE R507.5 DECK BEAM SPAN LENGTHS
25	IRC R602.3.1 STUD SIZE, HEIGHT AND SPACING TABLE R602.3(6) ALTERNATE WOOD BEARING WALL STUD SIZE, HEIGHT AND SPACING
27	IRC TABLE R602.7.5 MINIMUM NUMBER OF FULL HEIGHT STUDS AT EACH END OF HEADERS IN EXTERIOR WALLS TABLE 602.7.5 MINIMUM NUMBER OF FULL HEIGHT STUDS AT EACH END OF HEADERS IN EXTERIOR WALLS
29	IRC M1601.4.1 JOINTS, SEAMS AND CONNECTIONS
30	FIGURE 2-4 DUCT JOINT
31	IRC M1602.2 RETURN AIR OPENINGS
32	FIGURE 2-5 BUILDING PERIMETER SPACES
33	IRC P2503.5.1 ROUGH PLUMBING FIGURE 2.6 AIR TESTING OF DWV PLASTIC PIPING
34	IRC E3901.7 OUTDOOR OUTLETS FIGURE 2-7 DECK ELECTRICAL OUTLET
35	IRC E3901.11 FOYERS FIGURE 2-8 FOYER AREA ELECTRICAL OUTLETS
36	PART 3 INTERNATIONAL EXISTING BUILDING CODE CHAPTER 1
37	IEBC 101.2 SCOPE FIGURE 3-1 CONSTRUCTION WORK IN EXISTING SINGLE-FAMILY DWELLING
38	PART 4 INTERNATIONAL FUEL GAS CODE CHAPTER 3
39	IFGC 310.1.2 ARC-RESISTANT CSST FIGURE 4-1 CSST FUEL GAS PIPING
40	PART 5 INTERNATIONAL ENERGY CONSERVATION CODE-COMMERCIAL CHAPTERS 1 AND 4
41	IECC 104.2.6 FINAL INSPECTION FIGURE 5-1 EXAMPLE COVER IMAGE OF A COMMISSIONING REPORT
42	IECC C408.2.4 PRELIMINARY COMMISSIONING REPORT FIGURE 5-2 ICC COMMISSIONING GUIDELINE
44	PART 6 INTERNATIONAL ENERGY CONSERVATION CODE – RESIDENTIAL CHAPTERS 1, 2 AND 4
45	IECC R102.1.1 (IRC N1101.4) ABOVE CODE PROGRAMS
46	CHAPTER 2 [RE] (IRC-R202) DEFINITIONS FIGURE 6-1 WALL FRAMING FACTOR
47	IECC TABLE R402.1.2 (IRC – TABLE N1102.1.2) INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENT TABLE R402.1.2 (PARTIAL) INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENT
48	FIGURE 6-2 EXTERIOR WALL INSULATION WITH 24″ OC FRAMING FOR ZONE 6 ONLY
49	IECC R402.4.1.2 (IRC – N1102.4.1.2) TESTING FIGURE 6-3 BUILDING ENVELOPE AIR-LEAKAGE TESTING
50	IECC R403.2.3 (IRC – 1103.3.5) BUILDING CAVITIES FIGURE 6-4 MAY BE USED FOR RETURN AIR ONLY
51	IECC R403.3.6 (IRC – N1103.3.6) AND R403.3.7 (IRC – N1103.3.7) DUCTS BURIED WITHIN CEILING INSULATION AND DUCTS LOCATED IN CONDITIONED SPACE
52	FIGURE 6-5 DUCTS BURIED IN INSULATION
53	IECC R403.5.2 (IRC – N1103.5.2) DEMAND RECIRCULATION SYSTEMS FIGURE 6-6 WATER HEATER PIPING SYSTEM
54	IECC R405.2 (IRC – N1105.2) MANDATORY REQUIREMENTS FIGURE 6-7 DUCTS INSIDE BUILDING THERMAL ENVELOPE
55	IECC TABLE R406.4 (IRC – TABLE N1106.4) MAXIMUM ENERGY RATING INDEX TABLE R406.4 (N1106.4) MAXIMUM ENERGY RATING INDEX
56	FIGURE 6-8 ERI METHOD
58	2018 PENNSYLVANIA ALTERNATIVE RESIDENTIAL ENERGY PROVISIONS
60	2018 PENNSYLVANIA ALTERNATIVE RESIDENTIAL ENERGY PROVISIONS TITLE PAGE
61	COPYRIGHT
62	ACKNOWLEDGMENTS
64	TABLE OF CONTENTS
66	PREFACE
68	SECTION PA100 GENERAL PA101 SCOPE PA102 INTENT PA103 COMPLIANCE PA104 ENTRANCE REQUIREMENTS TABLE PA104 ENERGY ENHANCEMENT OPTIONS
69	PA105 COMPLIANCE DOCUMENTS PA106 DEFINITIONS PA107 IDENTIFICATION PA108 BUILDING THERMAL ENVELOPE INSULATION PA109 FENESTRATION PRODUCT RATING PA110 INSULATION PRODUCT RATING PA111 INSTALLATION PA112 MAINTENANCE INFORMATION
70	PA113 ABOVE CODE PROGRAMS PA114 CERTIFICATE
72	SECTION PA200 CLIMATE ZONES PA201 GENERAL FIGURE PA201.1 PENNSYLVANIA CLIMATE ZONES
74	SECTION PA300 BUILDING THERMAL ENVELOPE PA301 INSULATION AND FENESTRATION CRITERIA TABLE PA301 INSULATION AND FENESTRATION REQUIREMENTS BY COMPONENT PA302 SPECIFIC INSULATION REQUIREMENTS
75	FIGURE PA302.2 CEILING WITHOUT ATTIC SPACES FIGURE PA302.3(1) ATTIC HATCH FIGURE PA302.3(2) PULL-DOWN STAIRS
76	FIGURE PA302.7.1 EXTERIOR SLAB INSULATION
77	FIGURE PA302.7.2 INTERIOR SLAB INSULATION
78	PA303 FENESTRATION PA304 AIR LEAKAGE
79	TABLE PA304.1.1 AIR BARRIER AND INSULATION INSTALLATION
82	SECTION PA400 SYSTEMS PA401 CONTROLS PA402 DUCTS
83	TABLE PA402.4 DUCT LEAKAGE TARGETS PA403 MECHANICAL SYSTEM PIPING INSULATION PA404 SERVICE HOT WATER SYSTEMS PA405 MECHANICAL VENTILATION TABLE PA405.1 MECHANICAL VENTILATION SYSTEM FAN EFFICACY
84	PA406 EQUIPMENT SIZING PA407 SNOW MELT SYSTEM CONTROLS PA408 POOLS AND PERMANENT SPA ENERGY CONSUMPTION
86	SECTION PA500 ELECTRICAL POWER AND LIGHTING SYSTEMS PA501 LIGHTING EQUIPMENT
90	STATUTORY REVISIONS TO THE PA UCC- IRC 2004 ACT 13 2004 ACT 92 2006 ACT 108 ACT 9 OF 2007
91	ACT 1 OF 2011
94	ICC’S DIGITAL CODES LIBRARY
95	ICC MEMBERSHIP
96	ICC EVALUATION SERVICE
97	ICC ASSESSMENT CENTER

PA PhiladelphiaCounty PhiladelphiaCity 9

Sat, 19 Oct 2024 10:54:32 +0000

SUBCODE P - THE PHILADELPHIA PLUMBING CODE

Published By	Publication Date	Number of Pages
PA	N/A	3

PA PhiladelphiaCounty PhiladelphiaCity 8

Sat, 19 Oct 2024 10:54:31 +0000

SUBCODE R - THE PHILADELPHIA RESIDENTIAL CODE

Published By	Publication Date	Number of Pages
PA	N/A	6

PA PhiladelphiaCounty PhiladelphiaCity 5

Sat, 19 Oct 2024 10:54:29 +0000

SUBCODE F - THE PHILADELPHIA FIRE CODE

Published By	Publication Date	Number of Pages
PA	N/A	98